Jump to content
  • 0

Evan Thomas

Question

I am completely new to the world of DAWs so apologies in advance for sounding clueless.

I have just installed Cakewalk and I essentially cannot use it at all due to extreme lag with the UI. Anytime I click anything or even try to adjust the window, there is a 4-5 second delay before the action is registered. I am not sure how to fix this or even what settings I should begin to look into. To the best of my knowledge, all settings are at default, and my audio drivers are up to date. Does anyone have any idea what I might try to fix this issue?

In case it is helpful, here are the relevant specs of my PC:

  • CPU: AMD Ryzen 7 2700
  • RAM: 16 GB DDR4 3200 MHz

Like I said before, I am completely new to this stuff so please let me know if there is any other information I can provide to help diagnose the issue.

Link to comment
Share on other sites

12 answers to this question

Recommended Posts

  • 1

What graphics card do you have? Are you using the latest drivers.

Also, with a DAW software like Cakewalk by Bandlab, you will generally get the best performance using an external audio interface.  Sure, you can use onboard sound in WSASPI mode, but a card or external audio interface that comes with its own ASIO drivers will give better performance.

Also 4-5 seconds seems a really long time (was this actually measured?).  That to me seems like a system issue that's nothing to do with Cakewalk.

What Operating system.  Is it fully patched.  Are you using the latest drivers for all of your hardware.  Actually visit the manufacturer's web sites to verify this. Don't rely on automatic driver update software.

Link to comment
Share on other sites

  • 0

After looking through the forum a bit, I wonder if I might be experiencing the same issue as in this post. 

If this is in fact the case, is it possible to resolve the issue without an external sound card? I don't have a sound card; I was hoping to be able to use the software with just on-board sound.

Edited by Evan Thomas
typo
Link to comment
Share on other sites

  • 0
4 minutes ago, Promidi said:

What graphics card do you have? Are you using the latest drivers.

Also, with a DAW software like Cakewalk by Bandlab, you will generally get the best performance using an external audio interface.  Sure, you can use onboard sound in WSASPI mode, but a card or external audio interface that comes with its own ASIO drivers will give better performance.

Also 4-5 seconds seems a really long time (was this actually measured?).  That to me seems like a system issue that's nothing to do with Cakewalk.

What Operating system.  Is it fully patched.  Are you using the latest drivers for all of your hardware.  Actually visit the manufacturer's web sites to verify this. Don't rely on automatic driver update software.

GPU is RTX 2060 8GB. OS is Windows 10 64 bit. All drivers are up to date.

I haven't experienced any issues with any other software at all (games, etc.)

I think you hinted at the solution in your post. I tinkered with the settings a little bit and found the following to fix the issue:

In preferences I changed Audio >> Playback and Recording >> Driver Mode from the default ASIO to WASAPI Shared and all of the UI latency is gone.

Just for fun, I reverted the settings back and recorded the latency times. Clocked in between 3.6 and 4.4 seconds for any action.

Link to comment
Share on other sites

  • 0
24 minutes ago, Evan Thomas said:

GPU is RTX 2060 8GB. OS is Windows 10 64 bit. All drivers are up to date.

In preferences I changed Audio >> Playback and Recording >> Driver Mode from the default ASIO to WASAPI Shared and all of the UI latency is gone.

Just for fun, I reverted the settings back and recorded the latency times. Clocked in between 3.6 and 4.4 seconds for any action.

Unrelated to your issue but Nvidia released version 440.97 a few days ago...

Looks like the issue is sorted with the driver set to WASAPI mode.

Mind you, you should plan on an external audio interface some time in the future.

Link to comment
Share on other sites

  • 0
1 hour ago, Some Guy said:

GPU Acceleration also seems to be turned off by default.  You need to change a registry setting to enable it, unless that entry is vestigial.

Do you have a source for that. 

If you have a supported Graphics card (which I am sure the RTX 2060 is) then Windows 10 enables Hardware acceleration by default.  I have never had to go to the registry to enable it - even when I had a lowly GTX650ti

Just to confirm, I checked my registry and Hardware acceleration is enabled on my Windows 10 PC

Link to comment
Share on other sites

  • 0

I just wiped out the registry entries for Cakewalk and reinstalled.  GPU Acceleration in the registry is set to 0 (Disabled) by default.

Older versions of SONAR had an entry in the Preferences to Enable this.  Cakewalk may have migrated this setting on your computer if you upgraded from SPLAT or a previous version.

Unless that Registry Setting is vestigial (and, thus, ignored by the software), that is the T. ? 

Edited by Some Guy
Link to comment
Share on other sites

  • 0

Just so others reading this don’t get wrong ideas. 
You can absolutely use on board audio as long as you are aware of it’s in ability to sync overdubs properly. 
And for sure Cakewalk and Windows like WASAPI modes best

 I use on board audio with out issues  on my office computer. 
You can do a lot of stuff like editing and midi. 
But if you’re future plans are to record audio you need an audio interface with ASIO drivers or you will have sync issues. 

Link to comment
Share on other sites

  • 0
On 5/13/2021 at 12:54 AM, John Vere said:

Just so others reading this don’t get wrong ideas. 
You can absolutely use on board audio as long as you are aware of it’s in ability to sync overdubs properly. 
And for sure Cakewalk and Windows like WASAPI modes best

 I use on board audio with out issues  on my office computer. 
You can do a lot of stuff like editing and midi. 
But if you’re future plans are to record audio you need an audio interface with ASIO drivers or you will have sync issues. 

^^^ This.

Almost all cases of really laggy UI, have been down to buggy on-board audio interface ASIO drivers.  These ASIO drivers "fail" on specific calls, returning bogus results, but report a success causing Cakewalk to constantly retry to get a sensible result in the background. 

The answer for on-board audio interfaces is to use WASAPI.

  • Like 1
Link to comment
Share on other sites

  • 0

I had a very similar problem. Every time I moved my mouse over a button or icon, it could (not consistently, seems a bit random) take about 2-4 seconds before the button would highlight. Clicking an action, or even pressing spacebar to play/pause also has the lag.  In fact, everything in Cakewalk would lag.

I managed to fix it so it has no more lag from some of the replies - basically to turn on Graphics HW Acceleration. 

1) Run Registry Editor.

2) Go to Computer\HKEY_CURRENT_USER\SOFTWARE\Cakewalk Music Software\Cakewalk\Core

3) Double Click on UseGraphicsHWAccel. 

4) Set Value data to 1. (If it is already 1, then this is not your problem I'm afraid).

5) Close Registry Editor, and test Cakewalk. Hopefully it is fixed.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...