jerrydf Posted October 3, 2019 Share Posted October 3, 2019 On 10/3/2019 at 10:22 PM, simon said: they fixed it earlier version 9.01 I think Expand Thanks Simon. That takes me a step nearer the PayPal transaction Jerry Link to comment Share on other sites More sharing options...
Fleer Posted October 3, 2019 Share Posted October 3, 2019 Okay, watched the entire Deep Dive vid (thanks Larry) and found one essential upgrade apart from the resizable GUI: now you can select as many effects modules you like. Gone is the artificial limitation to six modules. And that’s indeed a good thing. 1 Link to comment Share on other sites More sharing options...
Fleer Posted October 3, 2019 Share Posted October 3, 2019 On the other hand, most of these improvements are now also part of Ozone Standard, as are all Vintage effects, and this for the first time. Upgrading from O8S to O9S seems to offer best value for money here. Link to comment Share on other sites More sharing options...
balinas Posted October 4, 2019 Share Posted October 4, 2019 On 10/3/2019 at 9:53 PM, simon said: latest 10.0.40 I think, windows - installed VST3 only. Nuendo threw the same error. Complained about them being 32bit (?) and blacklisted. Plugin manager showed them as 64bit so re-enabled and all was good. it just seemed like an odd error - somebody else reported the same problem on the steinberg forum. anyway all good - got my groove3/melodyne licences direct from izotope same as you Expand I saw that a lot with Cubase and VST2's. So for the most part I dont even bother to install the VST2's versions. So far the VST3's seem to play nice with Cakewalk, Cubase and StudioOnev4. 1 Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 I did a bad thing...I bought the update to MPS 3, which means it's beans for the rest of the month... The price we pay I guess...? Or should I say I GAS? I honestly should not have done it...but we do what we must! ? 1 5 Link to comment Share on other sites More sharing options...
Carlos Posted October 4, 2019 Share Posted October 4, 2019 (edited) On 10/4/2019 at 12:13 AM, cclarry said: I did a bad thing...I bought the update to MPS 3, which means it's beans for the rest of the month... The price we pay I guess...? Or should I say I GAS? I honestly should not have done it...but we do what we must! ? Expand Gratz but you're crazy, or you're crazy but awesome? I couldn't live just with beans though, more power to you Edited October 4, 2019 by Carlos 1 Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 3 Link to comment Share on other sites More sharing options...
Matthew Sorrels Posted October 4, 2019 Share Posted October 4, 2019 So how do you get the year of Groove 3? I got a serial number for MBS 3 and two for the reverbs but nothing else. Am I missing something? Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 (edited) On 10/4/2019 at 1:07 AM, Matthew Sorrels said: So how do you get the year of Groove 3? I got a serial number for MBS 3 and two for the reverbs but nothing else. Am I missing something? Expand You're supposed to go here and hit the "Redeem" button, and put the MPS3 Serial # In, and it generates the codes for Melodyne and the Pass, but it only gave me the Melodyne Serial #, but not the pass https://www.izotope.com/en/lp/partners/getmelodyne.html Edited October 4, 2019 by cclarry 1 Link to comment Share on other sites More sharing options...
Yan Filiatrault Posted October 4, 2019 Share Posted October 4, 2019 On 10/3/2019 at 6:23 PM, Bapu said: Post some comparisons. Expand Maybe with "please" at the end of your sentence... 1 Link to comment Share on other sites More sharing options...
Matthew Sorrels Posted October 4, 2019 Share Posted October 4, 2019 On 10/4/2019 at 1:23 AM, cclarry said: You're supposed to go here and hit the "Redeem" button, and put the MPS3 Serial # In, and it generates the codes for Melodyne and the Pass, but it only gave me the Melodyne Serial #, but not the pass https://www.izotope.com/en/lp/partners/getmelodyne.html Expand Same result for me. And the Melodyne Serial # is the same one they gave me back with RX or maybe MPS2.1, guess you don't get more than one of those no matter what. Link to comment Share on other sites More sharing options...
ensconced Posted October 4, 2019 Share Posted October 4, 2019 Come to papa I think I might pay a little extra and get it from the horses mouth to avoid as best as possible any potential hiccups. Link to comment Share on other sites More sharing options...
ensconced Posted October 4, 2019 Share Posted October 4, 2019 On 10/3/2019 at 4:46 PM, Mesh said: I'm still happy with O8A, think I'll stick with that (until BassDaddy says otherwise). Expand But . . but . . . that is hardly in keeping with the spirit. You could purchase the upgrade AND stick with O8A, now that would be in keeping with the spirit. 1 2 Link to comment Share on other sites More sharing options...
balinas Posted October 4, 2019 Share Posted October 4, 2019 On 10/4/2019 at 1:07 AM, Matthew Sorrels said: So how do you get the year of Groove 3? I got a serial number for MBS 3 and two for the reverbs but nothing else. Am I missing something? Expand I had to write Izotope support for the Groove 3 redeem code. They sent the code and link directly to the Groove 3 site. Put in the code and voila, a years pass showed up instantly in my Groove 3 account. Actually went very smoothly once I got the code. I would expect Izotope would be putting the redeem code directly in your account at Izotope. 1 Link to comment Share on other sites More sharing options...
Marshall Posted October 4, 2019 Share Posted October 4, 2019 On 10/3/2019 at 8:09 PM, cclarry said: Mastering Engineers TECHNICALLY don't do "the mix", they have to deal with exactly what they are sent... as opposed to those of us who do both...so don't confuse the two. Also, certain things "happen" during the Mastering phase that you have two choices...go back and fix it in the mix, or fix it in the Mastering right now, which, being usually time constrained (time is money) it's better to do it NOW if you can and move forward. (I'm speaking from a business perspective, of course) Expand Totally agree Larry - for my little set up, I’m just saying I could easily go back to the stems, sort the issue there, and render a new stereo wav file for mastering. The new feature is a time saver for sure. 1 Link to comment Share on other sites More sharing options...
Tomgu Posted October 4, 2019 Share Posted October 4, 2019 (edited) MPS 2.1 to 3 upgrade for $99 USD (+ VAT) https://recordingsoftware.com/product/izotope-music-production-suite-3-upgrade-3/ Edit(h): deal seems to be over already Edited October 4, 2019 by Tomgu 1 Link to comment Share on other sites More sharing options...
simon Posted October 4, 2019 Share Posted October 4, 2019 On 10/4/2019 at 8:45 AM, Tomgu said: MPS 2.1 to 3 upgrade for $99 USD (+ VAT) https://recordingsoftware.com/product/izotope-music-production-suite-3-upgrade-3/ Expand that's a great deal - is that legit do you think ? Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 (edited) On 10/4/2019 at 8:49 AM, simon said: that's a great deal - is that legit do you think ? Expand AND 10% off with code RSoct10!!! I'm kicking myself now! THAT is a mistake...but I would have gladly purchased that mistake! EDIT: not applicable to this product Edited October 4, 2019 by cclarry 1 Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 If you have MPS 2.1 you'd be crazy not to buy this! 1 Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 4, 2019 Author Share Posted October 4, 2019 On 10/4/2019 at 8:49 AM, simon said: that's a great deal - is that legit do you think ? Expand Yes, I've purchased there before 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now