Jesse Jost Posted September 25, 2019 Share Posted September 25, 2019 2019.09 Early Access installer now available! We're pleased to announce the Early Access for 2019.09, which includes many significant improvements, and over 100 bug fixes, many of which are long standing issues, all in keeping with our goal of making CbB as reliable and enjoyable as possible. We'd love for you to check it out before we drop the official public version, which should be in roughly a week. Please note that Early Access installers are update installers, which only update from a specific version. To install the 2019.09 Early Access build, you must be on the latest public release of 2019.07. Download Cakewalk 2019.09 EA installer If you haven't already done so, please read about the Early Access Program before participating. A big thanks to @Morten Saether and @Noel Borthwick for their great writeup of the highlights (below)! In the event you encounter a bug in this Early Access release, please be sure to bring it to the attention our most recent hire, @msmcleod, who, even in the unlikely event is not to blame, will be most eager to fix it post haste! Thanks again for your participation!The Bakers 2019.09 Highlights Editing and Comping Enhancements Duplicate Selected Clip(s) You can quickly duplicate the selected clip(s) with any of the following gestures: Press CTRL+D Click the Track view Clips menu and select Duplicate Selected Clip(s) Right-click in the Clips pane and select Duplicate Selected Clip(s) on the pop-up menu The following rules apply when duplicating clips: Only events and clip automation are copied. The new clip(s) will be pasted immediately after the existing clip(s), respecting the current Ripple Edit settings. To respect the current Snap to Grid settings, go to Edit > Preferences > Customization - Editing and select Use Current Snap Settings on Duplicate Selected Clip(s). After duplication, the Now time is forwarded to the end of the duplicate (with the duplicate selected), so you can press CTRL+D again to make multiple duplicates Unlike a normal paste, the current track will have no bearing on where the duplicates are pasted. Duplicates will always appear on the same tracks/lanes as the source selection. Tip: If you want to quickly create many repetitions, use the Edit > Copy and Edit > Paste Special commands. Paste / Paste Special behavior change In the previous versions of Cakewalk, settings in the Paste Special dialog box (Edit > Paste Special or CTRL+ALT+V) would persist for the remainder of the Cakewalk session and apply when you used the regular Edit > Paste (or CTRL+V) command. As a result, normal paste could potentially create multiple repetitions inadvertently. By default, normal paste no longer remembers the settings from the Paste Special dialog box, so you will only get one copy. To remember the Paste Special settings, go to Edit > Preferences > Customization - Editing and select Use Paste Special Options on Paste. Take lane record options You now have improved control over how new Take lanes are created during recording. The following options are available from the Record button context menu and Edit > Preferences > Project - Record: Create New Lane. Always create a new lane for each take. Reuse Existing Lane. Reuse existing lanes for each take (this option is not available when using the Comping record mode). Reuse Existing Lane. Unless Takes Overlap. Reuse existing lanes for each take, and only create new lanes if takes overlap. Import directly to Take lanesFile > Import > Audio and double-clicking to import from the Media Browser now respect the selected Take lane. Fast Edit filter switching in Take lanes You can now use SHIFT+right-click to toggle the Edit Filter in Lanes. New key modifiers for edits in Take lanes CTRL+ALT+drag adjusts a single crossfade Hold SHIFT and drag a clip edge to crop an individual clip Holding SHIFT on Comp track (lanes collapsed) now allows for adjusting split location across lanes Change fade type on crossfaded clips in Take lanes Cakewalk now allows for the adjustment of fade types (Linear, Slow Curve, or Fast Curve) for clips in Take lanes. Right-click the top part of a clip fade to show the curve type pop-up menu. Use ripple edit for copy/paste/cut Cakewalk now uses ripple editing (Ripple Edit Selection) during Edit > Paste Special when Slide Over Old to Make Room is selected, and during Edit > Cut Special when Delete Hole is selected. SHIFT+double-clicking a clip no longer hides other tracks SHIFT+double-clicking a clip maximizes the clip, but no longer hides other tracks. This allows you to still show other tracks by scrolling or zooming the Track view vertically. SHIFT+ESC to clear selection In addition to clicking an empty space to clear the current selection, you can now also press SHIFT+ESC. CTRL+Y to redo In addition to CTRL+SHIFT+Z, you can now also use the standard Windows redo keyboard shortcut CTRL+Y. Piano Roll view shows correct note colors while dragging Previously, all notes were always shown in the same red color while dragging. When dragging notes from multiple tracks, it was difficult to know which track a note lived in. Notes are now drawn using the correct track color. Stability All reports of loss of plug-in states when loading projects have been addressed. Intermittent crashes when adding plug-in side-chains were fixed. Setting Track Input to same Patch Point as Output crashes. Focusrite ASIO Devices could create a buzzing sound when stopping playback rapidly. User reported ASIO crash on playback start. User reported Crash when deleting MIDI track. Rapidly stopping and starting playback could rewind the transport unexpectedly. Crash editing plugin automation envelope during playback. Some plug-in’s such as Acorn Digital could cause a hang when changing presets. Edit commands to delete hole or slide to make room could occasionally have unexpected results. These commands now use standard ripple edit behavior. Some legacy .WRK files could cause a hang when attempting to open them. Adding a synth in the FX Rack could cause all plugin automation to get orphaned on next load of the project. Plug-insImprovements to plug-in state loading and presets Saving and loading plug-in states and presets has been streamlined and greatly improved and simplified to prevent unexpected interactions with some third party plug-ins. By preventing redundant plug-in parameter updates, plug-ins and synths now load faster when opening project files. A few users previously reported intermittent cases where plug-in settings could be lost when changing plugin presets, copying FX chains or when loading projects. All such reported cases of this problem have been thoroughly investigated and addressed so these problems should no longer recur. Support for VST3 Program Changes Cakewalk now supports changing programs for VST3 plugins via a new Program change parameter. There is now a Preset value at the end of the automation parameter list that will change plugin preset values for plugins that support it. NOTE: This Preset parameter is only displayed for plugins that expose VST3 program changes to the host. (It may not always be named “Preset”) Waves plug-ins support the new program change parameter. The new Preset parameter can be automated via envelopes. For supported VST3 plugins, program changes can be done during playback via MIDI messages. To do that you must enable Translate Program Changes in the plugin properties first and then restart the app. For some plug-ins, program changes can be expensive. Don’t use sweeps to automate the program change parameter. Instead use jump events or linear sections. Overhaul of plug-in time sync in engine There has been an overhaul of the engine to improve and optimize time sync with plug-ins. The changes improve the accuracy of time synchronization while seeking on the timeline during playback and while looping. We also addressed known problems with time sync with Melodyne and other time dependent plug-ins that have an internal timeline. Support for non-chunked VST2 plug-ins There are a few VST2 plug-ins that do not support chunked persistence. E.g. VCV Rack Cakewalk now properly restores parameters for such plug-ins when loading projects Optimizations The overhaul of plug-in time sync in the engine improved the efficiency when playing back or looping projects with lots of plugins, by eliminating many unnecessary and costly time unrolling conversions. This should yield moderate CPU gains while playing or looping projects at low latency with lots of plugins, since the plug-in time conversions are now optimized. By preventing redundant plug-in parameter updates, plug-ins and synths now load faster when opening project files. Switching plug-in presets are now faster since there are fewer parameter updates. UI UpdatesAuto Crossfade toggle in Track view In addition to the Track view Options menu, you can now also enable/disable Automatic Crossfade via the new Automatic Crossfade button in the top right corner of the Track view. You can also right-click or long press the button to specify the default crossfade type.PRV Note names Note event in the Piano Roll view can optionally show note names (pitch or custom note names from instrument definitions). To show note names, click the Piano Roll view Notes menu and select Show Note Names. Note: Note names automatically hide at low zoom levels. Updated ‘Basic’ Lens The Basic lens has been updated to provide a cleaner and simplified layout. Note: Updated factory lenses and Help Module content are now copied to the user folder during installation. Insert Audio track and MIDI track shortcuts You can now quickly insert a new audio or MIDI track by using the following keyboard shortcuts: CTRL+T = Insert Audio Track CTRL+SHIFT+T = Insert MIDI Track Note: CTRL+T was previously assigned to 'Hide tracks not in selection'. Updated transport behaviors Go to Start and Go to End buttons now accurately seek to project beginning and end, and do not stop playback. The W (rewind) key always seeks backwards in time to the prior "landmarks". There are 3 landmarks: the original playback start time the loop start time the project start time (time 0, or 1:1:0) Note: The RTZ command has been renamed to Rewind to Landmarks The Go to Beginning (1:1:0) command has been renamed to Go to Start (RTZ) The Go to Start transport button uses the CTRL+HOME shortcut Click Behavior ‘Left Click Rewinds to Clip Start in Lanes’ option When isolating clips in Take lanes during playback, the Now time jumps to the clicked location by default. To automatically jump to the clip start instead, enable the Track view Options > Click Behavior > Left Click Rewinds to Clip Start in Lanes option. Note: This option replaces the previous SHIFT-click behavior. Improved Panic/Reset The Reset button in the Transport Control Bar module now clears stuck MIDI notes on virtual instruments more reliably. In previous versions of Cakewalk, both hardware MIDI outputs and virtual instruments shared the same reset method, which used controller 123 (all notes off) by default. VST3 as well as some VST2 soft synths don’t respond to controller 123, and instead require individual note off messages in order to clear stuck notes. In Cakewalk 2019.09, the Reset button sends both controller 123 and individual note off messages to soft synths. For hardware MIDI outs, if necessary you can use the PanicStrength Cakewalk.ini variable to specify the default behavior: PanicStrength=0 (controller 123; default) PanicStrength=1 (individual note off; slower) Force a reload of the audio and MIDI engine To force a restart of the audio and MIDI engine (only if the transport is not playing/recording), including a reset of ASIO, hold down the CTRL key and click the Reset button in the Transport Control Bar module. Mackie Control enhancements This release features many significant enhancements to the Mackie Control surface, including: ProChannel EQ, Track Compressor & Bus Compressor support Korg nanoKONTROL Studio support for Select button, Buses/Track selection HUI Protocol support Disable Handshake option for surfaces which only support the newer MCU protocol Automatic Fader assignment based on order added within preferences Key press support for function buttons / footswitches Added button mappings Updated command list to match Cakewalk's internal list Support for alternative param labels You can now specify alternative label names for your parameters within MackieControl.ini. This may be useful if the automatic abbreviated 6 character label isn’t as readable as you’d like. The alternative labels are still limited to 6 characters (as this is the limit of characters for each strip on the Mackie devices), but you can now specify your own by adding them to the bottom of each plugin section in the following format: VPotLabeln=p,name Where: n = the number of the vpot p = the number of the VST parameter whose label you which to override name = the new label e.g. VPotLabel0=17,HiGain VPotLabel1=18,HiFreq M1VPotLabel2=19,Hi Q Live performance enhancements This release includes a few enhancements that can be helpful when using Cakewalk in a live performance. Option for Play List to close projects regardless of project changes When using the Play List, the new File > Discard Project Changes During Playback option allows the Play List to automatically discard any changes before loading the next song. This lets you make minor temporary changes during playback, such as adjusting levels, without being prompted to save the changes before loading the next song. During playback, the Play List will ignore a project's modified state and close without saving. This option is enabled by default. Note: This option is only active during (Play List) playback. Cakewalk will always prompt to save a modified project if playback is stopped. Option for Play List to preload the next song during playback By default, the Play List loads the next song while the current song is playing. While this can save time before the next project starts playing, it may cause glitches when loading large complex projects projects during playback. To defer loading the next song until playback of the current song has finished, disable the File > Preload Next Song During Playback option. Automatically stop/pause playback with MCI MIDI events You can instruct Cakewalk to stop or pause playback at a defined moment, so you can start playback again manually. This can be very useful in a live setting. This is done by inserting an MCI Command event in a MIDI track’s Event List view (ALT+8), and assigning the MCI Commands value to either stop or pause: stop - stops the transport and returns to zero pause - pauses the transport allowing you to manually continue playback from where you left off Press Play (SPACEBAR) manually to resume playback. Play List controls exposed to Help Module The various Play List buttons now show descriptive information in the Help Module. Compatibility with older SONAR WRK files We continue to improve backwards compatibility with older Cakewalk products. Older SONAR .WRK files that contain automation or reference MCI audio events will now load properly in Cakewalk. 4 17 2 Link to comment Share on other sites More sharing options...
Matthew Sorrels Posted September 25, 2019 Share Posted September 25, 2019 Quote Overhaul of plug-in time sync in engine Hooray! This fixes Rapid Composer's looping problem (where it would not play the first note after looping). I had begun to think it would never happen. My test project that I have been using to see if this bug was ever fixed was created 7/4/2017. Quote Duplicate Selected Clip(s) This rocks. 1 2 Link to comment Share on other sites More sharing options...
User 905133 Posted September 25, 2019 Share Posted September 25, 2019 (edited) 21 hours ago, Jesse Jost said: Updated ‘Basic’ Lens The Basic lens has been updated to provide a cleaner and simplified layout. Note: Updated factory lenses and Help Module content are now copied to the user folder during installation. Just a guess, but I think the revised basic lens will appeal to people who want their initial UI to be uncluttered. For newcomers to Cakewalk, I think the basic lens should satisfy the need for an fresh-looking workspace. Also, it looks like a great many comments (feedback, requests, etc.) have been addressed by the September update. Edited September 25, 2019 by MusicMan11712 (aka Dr. Steve) to remove OT content 1 Link to comment Share on other sites More sharing options...
Bill Ruys Posted September 25, 2019 Share Posted September 25, 2019 Wow! There is so much in this update. You guy have been hard at work! Looking forward to giving it a test drive. 1 Link to comment Share on other sites More sharing options...
James Argo Posted September 25, 2019 Share Posted September 25, 2019 Awesome work! Hope the update will enhance our workflow. 1 Link to comment Share on other sites More sharing options...
Michael Vogel Posted September 25, 2019 Share Posted September 25, 2019 (edited) I'm currently running CbB 2019.07.79 according to my CbB About screen; My Bandlab app tells me I'm up to date. So, I download the Early access installer from the supplied link and get an error saying that the installer will only update 25.07.0.79. Isn't that what I have? I've tried running the update as an Administrator. Edited September 25, 2019 by Michael Vogel Link to comment Share on other sites More sharing options...
Feral State Sound Posted September 25, 2019 Share Posted September 25, 2019 Wow! It seems that you are really listening to the community (I made the request for showing note names on PRV). Cakewalk seems to be better with Bandlab now, it is an stellar product for sure. Does duplicating clips (Ctrl+D) also works on PRV with midi notes? Link to comment Share on other sites More sharing options...
James Argo Posted September 25, 2019 Share Posted September 25, 2019 2 minutes ago, Feral State Sound said: Does duplicating clips (Ctrl+D) also works on PRV with midi notes? Yes it does... Confirmed! ? 1 Link to comment Share on other sites More sharing options...
Eve Ripper Posted September 25, 2019 Share Posted September 25, 2019 Maybe I'm too late... But in previous release there was an update for recording takes in which you could use "LOOP recording", do takes and after pressing stop it should delete unfinished take. Is this fixed? Or maybe I'm wrong somewhere? Link to comment Share on other sites More sharing options...
JoseC Posted September 25, 2019 Share Posted September 25, 2019 Unable to install. The installer will only install over version 25.07.0.79, and I have 25.07.0.84 that Noel kindly sent me to test persistence of VCV Bridge plugin parameters (that BTW has been fixed in this update). Guess I´ll have to wait. Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted September 25, 2019 Share Posted September 25, 2019 1 minute ago, JoseC said: Unable to install. The installer will only install over version 25.07.0.79, and I have 25.07.0.84 that Noel kindly sent me to test persistence of VCV Bridge plugin parameters (that BTW has been fixed in this update). Guess I´ll have to wait. You can uninstall your current build and reinstall the 2019.07 release build from BandLab Assistant to grab the update (all of your settings will persist okay). Link to comment Share on other sites More sharing options...
Matthew Sorrels Posted September 25, 2019 Share Posted September 25, 2019 If you had installed a test beta version you'll have to get Noel to send you a full installer. Or I think you can uninstall CbB, then reinstall the public release, then install this early access. Link to comment Share on other sites More sharing options...
Francois van der Merwe Posted September 25, 2019 Share Posted September 25, 2019 You guys at CbB are awesome! This is going to be the best DAW in the world. 2 Link to comment Share on other sites More sharing options...
JoseC Posted September 25, 2019 Share Posted September 25, 2019 14 minutes ago, Jonathan Sasor said: You can uninstall your current build and reinstall the 2019.07 release build from BandLab Assistant to grab the update (all of your settings will persist okay). Will the final release install on top of my current build? If yes, I guess that I´ll rather wait. It will be a few days, won´t it? Link to comment Share on other sites More sharing options...
Eve Ripper Posted September 25, 2019 Share Posted September 25, 2019 11 hours ago, Jesse Jost said: PRV Note names Note event in the Piano Roll view can optionally show note names (pitch or custom note names from instrument definitions). To show note names, click the Piano Roll view Notes menu and select Show Note Names. Does it mean that we can forget about setting up drum maps for software samplers? Link to comment Share on other sites More sharing options...
Wookiee Posted September 25, 2019 Share Posted September 25, 2019 You peeps have sure done some amazing work a big thanks to all involved from Noel to Mark and all those in between. 1 Link to comment Share on other sites More sharing options...
Zirrex Posted September 25, 2019 Share Posted September 25, 2019 PRV Note names Thank you! Link to comment Share on other sites More sharing options...
FJ Lamela Posted September 25, 2019 Share Posted September 25, 2019 Wow,a lot of improvements and fixes.Thanks a lot to the Cakewalk bandlab Team.Thanks! Link to comment Share on other sites More sharing options...
jesse g Posted September 25, 2019 Share Posted September 25, 2019 Nice and thank you for the great improvements, but with several people have problems updated the early release, I think I will wait for the official release in about a week or two. I love the Mackie Control Universal enhancements Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted September 25, 2019 Share Posted September 25, 2019 HI:) Great Update!! >>>To respect the current Snap to Grid settings, go to Edit > Preferences > Customization - Editing and select Use Current Snap Settings on Duplicate Selected Clip(s). I can't find this in the German Version..... Thanks;) Bassman. Link to comment Share on other sites More sharing options...
Recommended Posts