Larry Shelby Posted September 13, 2019 Share Posted September 13, 2019 Huge deals on Nomad Factory, starting at $9.99. Apparently they want people to know they're "still there", they have a new website, they have updates planned, and they want to fund their programmers like this, or something like that. Some total no-brainers in there, didn't find them listed at those prices anywhere else so far. Get the deals: https://go.nomadfactory.com/store/ 2 1 Link to comment Share on other sites More sharing options...
Mánibranðr Studios Posted September 13, 2019 Share Posted September 13, 2019 Oooh these are good deals. Stuff I would jump on if i didn't just buy Scheps Omni Channel XD 1 Link to comment Share on other sites More sharing options...
Larry Shelby Posted September 13, 2019 Author Share Posted September 13, 2019 1 minute ago, Freyja Grimaude-Valens said: Oooh these are good deals. Stuff I would jump on if i didn't just buy Scheps Omni Channel XD BTW...you can STILL pick up Scheps Omni Channel at Best Service for $26.12 ...less if you have Best Coinshttps://www.bestservice.com/scheps_omni_channel.html 2 Link to comment Share on other sites More sharing options...
Mánibranðr Studios Posted September 13, 2019 Share Posted September 13, 2019 Just now, cclarry said: BTW...you can STILL pick up Scheps Omni Channel at Best Service for $26.12 ...less if you have Best Coinshttps://www.bestservice.com/scheps_omni_channel.html For those who doesn't already have it, this is a great deal. 2 Link to comment Share on other sites More sharing options...
RSMcGuitar Posted September 13, 2019 Share Posted September 13, 2019 This just reminded me to re-install my Nomad plugins. So thanks for that. I think this might be the most convoluted authorization scheme I've ever used. It's hair-pullingly ridiculous! 1 Link to comment Share on other sites More sharing options...
Sidney Earl Goodroe Posted September 13, 2019 Share Posted September 13, 2019 I got the Analog Rack a few years back and for vocals it stays in my projects!!!!! Love the BlueTube plugs that came with Sonar. They get used regularly!! 3 1 Link to comment Share on other sites More sharing options...
kitekrazy1 Posted September 14, 2019 Share Posted September 14, 2019 2 hours ago, Sidney Earl Goodroe said: I got the Analog Rack a few years back and for vocals it stays in my projects!!!!! Love the BlueTube plugs that came with Sonar. They get used regularly!! Do these work in Bandlab? I remember these were Sonar specific. Link to comment Share on other sites More sharing options...
msmcleod Posted September 14, 2019 Share Posted September 14, 2019 22 minutes ago, kitekrazy said: Do these work in Bandlab? I remember these were Sonar specific. Yes, they work in Cakewalk by BandLab and SONAR X3 and above. The Cakewalk bundled ones won't work in any other DAW though. Link to comment Share on other sites More sharing options...
kennywtelejazz Posted September 14, 2019 Share Posted September 14, 2019 (edited) 25 minutes ago, kitekrazy said: Do these work in Bandlab? I remember these were Sonar specific. Yes , they work in Cakewalk by Bandlab ... Kenny Edited September 14, 2019 by kennywtelejazz Link to comment Share on other sites More sharing options...
kitekrazy1 Posted September 14, 2019 Share Posted September 14, 2019 3 minutes ago, msmcleod said: Yes, they work in Cakewalk by BandLab and SONAR X3 and above. The Cakewalk bundled ones won't work in any other DAW though. Oh wow they do! I had to remove them from the Windows folder because they wouldn't work elsewhere. Link to comment Share on other sites More sharing options...
Paul P Posted September 14, 2019 Share Posted September 14, 2019 Integral Studio Pack III 99$ Included : - Analog Mastering Tools - Analog Signature Pack - Blue Tubes Dynamics Pack - Blue Tubes Effects Pack - Blue Tubes Equalizers Pack - Blue Tubes Analog TrackBox - BlueVerb DRV-2080 - Cosmos - Echoes - Essential Studio Suite - Liquid Bundle II - Magnetic II - Retrology Motown (Music & Film) - Retrology British Bundle - Retrology PulseTec EQs - Retrology ALL-TECH - Rock Amp Legends 1 1 Link to comment Share on other sites More sharing options...
Grem Posted September 14, 2019 Share Posted September 14, 2019 2 hours ago, Paul P said: Integral Studio Pack III 99$ This is what I got in on a very long time ago!! For the same price too. And they didn't include Cosmos back then. I think I had to buy Magnetic, and upgrade that to Magnetic II, then I was able to get the Integral PAck for $99. It was something like that, just so long ago!! Link to comment Share on other sites More sharing options...
Matthew Sorrels Posted September 14, 2019 Share Posted September 14, 2019 Did they ever update the Cakewalk/SONAR ones with the fix for sample rates other than 44,100? I have the Integral Studio Pack so it doesn't effect me, but I'm not sure the Cakewalk version of these got that fix. I vaguely remember something about the timing being wrong if you were using anything other than 44.1k. So anything with a time component would be off (delays/etc). Link to comment Share on other sites More sharing options...
Canopus Posted September 14, 2019 Share Posted September 14, 2019 (edited) I’ve had Nomad Factory MAGMA for a few years but had actually written it off as impossible to use (at least in SONAR) because of frequent crashes during preset changes. After any such crash SONAR completely froze up. I’ve also seen problems being reported at Plugivery and KVR saying MAGMA was crashing Reaper, Studio One and FL Studio, so SONAR wasn’t the only one. However, this thread reminded me of MAGMA and made me put this effects rack into CbB to see if the crashes still occurred. In fact, I was certain that they would. But to my surprise it didn’t crash one single time although I must have changed preset at least fifty times. It might be a coincidence, it might be changes done internally to CbB, or it might be because I now run under Windows 10 instead of Windows 7. But the fact remains – I could no longer get MAGMA to crash, at least in my simple bare-bones test project. Ok, so MAGMA v. 1.6.6 still has some problems with CbB: the Play and Pause buttons in the Transport module don’t update when MAGMA is active, the Tempo display doesn’t update to tempo changes and there are probably some additional display issues that I haven’t noticed. But more importantly: the effects were applied and the plug-in did not crash and bring the DAW down with it. Maybe a bit OT, but I thought maybe someone else with the same bad experience of MAGMA would like to know and test it out for themselves. Edited September 14, 2019 by Canopus 1 Link to comment Share on other sites More sharing options...
kennywtelejazz Posted September 14, 2019 Share Posted September 14, 2019 (edited) 1 hour ago, Canopus said: I’ve had Nomad Factory MAGMA for a few years but had actually written it off as impossible to use (at least in SONAR) because of frequent crashes during preset changes. After any such crash SONAR completely froze up. I’ve also seen problems being reported at Plugivery and KVR saying MAGMA was crashing Reaper, Studio One and FL Studio, so SONAR wasn’t the only one. However, this thread reminded me of MAGMA and made me put this effects rack into CbB to see if the crashes still occurred. In fact, I was certain that they would. But to my surprise it didn’t crash one single time although I must have changed preset at least fifty times. It might be a coincidence, it might be changes done internally to CbB, or it might be because I now run under Windows 10 instead of Windows 7. But the fact remains – I could no longer get MAGMA to crash, at least in my simple bare-bones test project. Ok, so MAGMA v. 1.6.6 still has some problems with CbB: the Play and Pause buttons in the Transport module don’t update when MAGMA is active, the Tempo display doesn’t update to tempo changes and there are probably some additional display issues that I haven’t noticed. But more importantly: the effects were applied and the plug-in did not crash and bring the DAW down with it. Maybe a bit OT, but I thought maybe someone else with the same bad experience of MAGMA would like to know and test it out for themselves. I had those type of crashes you mentioned for a while myself . I would get them while I was auditioning a MAGMA patch in real time while playing my song . Also the older preset would hang and I would see both the older preset and the new one I was looking to hear in the menu . they were both highlighted ... In my case I did not get to flustered about these problems ...for a while I would just stop the tune and change to my intended MAGMA patch . Never had a crash in Reaper , Waveform 10 or any other DAW's I use Splat was sensitive while using MAGMA , Cakewalk by Bandlab seems much better able to deal w MAGMA'a quirks ... I have hosted all my 3rd party plugs in MAGMA and on that level MAGMA is beyond the call of duty and what constitutes a cool app in my book . Yes I do have bitter sweet feelings about MAGMA , Nomad Factory told me a couple of years ago they would look into why MAGMA did not want to work on my i Mac ..That was the last I heard of them after repeated attempts to communicate and seek a solution . all that aside I absolutely LOVE MAGMA . dealing w the problems and learning to let it slide for now is still worth it to me Kenny Edited September 14, 2019 by kennywtelejazz Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now