msmcleod Posted September 3, 2023 Share Posted September 3, 2023 1 hour ago, norfolkmastering said: I was hoping to see an issue reported back in February dealt with in the latest update. It concerns lack of updating of the track output name in the API when a bus is renamed. Mark said he had a fix and it would be included in the next release. If you read the first three posts in the topic below, the issue and solution are discussed. Can you let me know if this is an omission will be picked up before the final release please. I think this has just been missed from the release notes. The fix was done in the Sonar code in Feb, and applied to the CbB code back in April. 2 Link to comment Share on other sites More sharing options...
Keni Posted September 3, 2023 Share Posted September 3, 2023 (edited) Nevermind... Edited September 3, 2023 by Keni Link to comment Share on other sites More sharing options...
Charles Nelson Posted September 3, 2023 Share Posted September 3, 2023 I really wish you'd disable the x86 hardware check. I can't install the update on my ARM64 based Windows 11 Pro laptop. Link to comment Share on other sites More sharing options...
Doodaman Posted September 3, 2023 Share Posted September 3, 2023 Just a quick verification to make certain what I am reading is correct, it isn't very clear: This early access release will be followed with the full public release of version 2023.09 and that is the version you must update to continue using Cakewalk by BandLab not this early access release. Correct? Link to comment Share on other sites More sharing options...
Shayne White Posted September 3, 2023 Share Posted September 3, 2023 I'm going to opt out of the early access release and wait till it's public, but I'm definitely excited to see a new update to CbB. I'm also looking forward to the Sonar revamp. Glad Cakewalk is still going strong! Link to comment Share on other sites More sharing options...
Jim Stamper Posted September 3, 2023 Share Posted September 3, 2023 On 9/1/2023 at 11:35 AM, Glenn Stanton said: simple experiment - collapse a stereo track into mono - level? collapse a stereo clip into mono - level? generally collapsing stereo into mono is a 3db gain. track, clip, buss, etc. of course final level is determined by content of L+R. so do the test with noise to assess the new level correctly - note that pan laws (like -3db center) can also impact the perceived results. ? e.g. i take a -18db stereo noise clip, bounce to mono = -15db noise clip. If I understand this issue correctly .... I thought it has existed by design for many years, not only in Cakewalk but most other DAWS, and is strictly the result of how you set your Pan Laws. Is there something else going on outside of the Pan Law settings? Link to comment Share on other sites More sharing options...
Diogo Silva Posted September 3, 2023 Share Posted September 3, 2023 Ok... Will Cakewalk Sonar be free as Cakewalk By BandLab is? Will Cakewalk Sonar open my Cakewalk By Bandlab projects? Thank you. Link to comment Share on other sites More sharing options...
Will. Posted September 3, 2023 Share Posted September 3, 2023 20 minutes ago, Diogo Silva said: Will Cakewalk Sonar be free as Cakewalk By BandLab is? No! It wont be. 21 minutes ago, Diogo Silva said: Will Cakewalk Sonar open my Cakewalk By Bandlab projects? Yes, it will. Link to comment Share on other sites More sharing options...
Glenn Stanton Posted September 3, 2023 Share Posted September 3, 2023 1 hour ago, Jim Stamper said: If I understand this issue correctly .... I thought it has existed by design for many years, not only in Cakewalk but most other DAWS, and is strictly the result of how you set your Pan Laws. Is there something else going on outside of the Pan Law settings? correct, the conversation was whether or not the bounce to mono and/or collapse to mono created a gain over the original stereo... Link to comment Share on other sites More sharing options...
RDan Posted September 3, 2023 Share Posted September 3, 2023 Am I the only one who lost GS Wavetable after the update? Can't see clearly... Link to comment Share on other sites More sharing options...
Carl Posz Posted September 3, 2023 Share Posted September 3, 2023 (edited) On 9/2/2023 at 6:45 AM, Noel Borthwick said: A full installer may be made available when it's released publicly. That would be very helpful. To use this I'm assuming I'd have to remove and reinstall what I currently have? Edited September 3, 2023 by Carl Posz Link to comment Share on other sites More sharing options...
Carl Posz Posted September 3, 2023 Share Posted September 3, 2023 Okay. If I install this early release, when the official release comes out can I just install that and continue as if I never installed the early release? Link to comment Share on other sites More sharing options...
Keni Posted September 3, 2023 Share Posted September 3, 2023 5 minutes ago, Carl Posz said: Okay. If I install this early release, when the official release comes out can I just install that and continue as if I never installed the early release? That’s usually the case... though sometimes additional releases fome out and other times, the version tested is the version released as in equals. 1 Link to comment Share on other sites More sharing options...
RDan Posted September 3, 2023 Share Posted September 3, 2023 Really in the update there is a bug with GS Wavetable and midi ports, rolled back, everything reappeared. Fix a real bug... Link to comment Share on other sites More sharing options...
msmcleod Posted September 3, 2023 Share Posted September 3, 2023 Just now, RDan said: Really in the update there is a bug with GS Wavetable and midi ports, rolled back, everything reappeared. Fix a real bug... IIRC support for the MS GS Wavetable has been removed due to incompatibilities with Windows 11. 1 1 Link to comment Share on other sites More sharing options...
RDan Posted September 3, 2023 Share Posted September 3, 2023 23 minutes ago, msmcleod said: IIRC support for the MS GS Wavetable has been removed due to incompatibilities with Windows 11. It's stupid to remove it completely. It is unlikely that even 50% of users now use Windows 11 1 1 Link to comment Share on other sites More sharing options...
Chris Woodbridge Posted September 3, 2023 Share Posted September 3, 2023 Good afternoon, I have a quick question regarding the update(that I believe I know the answer to. I am in the middle of a project and am leery about unknown unknows when it comes to updates. Can I safely assume that I cannot run the update on my system and still keep my most recent build(2022.11, build21) running parallel on the same machine? Assuming it is no, has anyone tried doing the update and rolling back with a Windows system restore? The project is a short film, and it's one of those where I don't hear anything for 2 weeks, and suddenly the director wants three scenes in a few days, I would not want to chance running into an issue without an escape hatch. As an aside, I have been using Cakewalk for a long time, and appreciate the community support. I am hoping the new pricing for the upcoming DAW is competitive, it seems like it will be. Thank you. Link to comment Share on other sites More sharing options...
Guest Posted September 4, 2023 Share Posted September 4, 2023 (edited) 14 hours ago, Lord Tim said: Guys, let's keep this thread on topic with discussing any issues you have with this particular Early Access release. Any talk about future plans or price or anything outside of this particular release is only going to muddy up the thread. Please start a new thread in the main forum for anything outside of this. Edited September 4, 2023 by Artie Choke Link to comment Share on other sites More sharing options...
Promidi Posted September 4, 2023 Share Posted September 4, 2023 I am not sure if this issue existed before the 2023.9 ER55, but I have just noticed it. When I have saved a track template of a SIT with input echo enabled, and then reload it, the input echo of the loaded track template is not illuminated. The input echo functions as if it is illuminated (ie, MIDI data is received), however. Normal MIDI tracks are OK, though. Link to comment Share on other sites More sharing options...
Promidi Posted September 4, 2023 Share Posted September 4, 2023 7 hours ago, RDan said: Am I the only one who lost GS Wavetable after the update? Can't see clearly... I definitely will not miss this thing.... to me, that thing sounded atrocious..... 1 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now