Jump to content

Bitwig 5.1 Final is here... Not a deal


ralfrobert

Recommended Posts

What's New in Bitwig Studio 5, Beta 1

1. MSEG FAMILY — DRAWING CURVES FOR MODULATION…

A multi-segment envelope generator, or MSEG, is a tool for drawing custom envelopes, automation shapes, looping patterns, and more

Based on the idea of MSEG, we've created five (5) new devices that share a common way to draw, save, and interchangeably load curves (via the new BWCURVE file format)

What every modulator/module in the family shares is a central curve component, which defines the shape of the action and is completely under the control of the user

Each curve is simply a series of points arranged on a fixed or free timeline (depending on the device)

Five separate devices means each is focused on its particular task, with only the right parameters for that job

NEW MODULATOR & POLYMER/GRID MODULE: SEGMENTS (ENVELOPE) 

A freely drawable, segmented envelope generator

With all familiar envelope modulator/module controls

Four Play Mode options are available:

One-shot (⇀) - Plays thru the entire shape (while the voice is alive) at note on

Hold (?) - Uses any one of the curve's points as the hold/sustain level, which is also the release start

Looping (⥤) - Uses any two of the curve's points, and loops forwards between them on sustain; the loop end point is also the release start

Ping Pong (⇌) - Uses any two of the curve's points, and loops forwards and backwards between them on sustain; the loop end point is also the release start

The hold point or loop region & start/end points are shown in the inverse color of the interface; on the modulator, this is blue

You can either drag one of these points to another point, or right-click on any point and choose the appropriate option — either Set Hold Point (when in Hold mode), or Set Loop Start / Set Loop End (when in Looping or Ping Pong modes)

A set Rate (from 0.2 to 50) with regard to the set Timebase (either Seconds, Milliseconds, Bars or other beat-time units, Pitch (of current note), or Hold)

Both the Rate and Timebase can be modulated for each note, for example by Velocity (from the Expressions modulator), or any other source

This Rate –Timebase pair defines the primary interval of the whole envelope, which defaults to a setting of 1 bar, and with a shape that ends after one iteration

The curve editor is scrollable and shows a time ruler in the primary interval (1, 2… n), with the set number of grid units displaying within each primary interval

Clicking and dragging in the ruler area allows for zooming and scrolling, just as with the Arranger

Points can be added or dragged to extend the length of the envelope, so taking the default settings and adding a point at the 4 line would extend the shape to be 4 bars long

Option to Enabling Smoothing, with Smoothing Time set in milliseconds/seconds

Both settings can be automated and modulated, for controlling the sharpness vs. smoothness of each voice, for example by Poly Pressure (from the Expressions modulator), or any other source

On the Polymer module version of Segments, both parameters are available in a context menu when right-clicking on the module's background

A Bipolar toggle (±) maintains the curve's shape but rescales it, so that the minimum value is -1 and the middle value is now 0 (zero)

The modulator version of Segments also has standard envelope modulator options:

A Single Trigger option to keep the envelope from retriggerring when overlapping notes are received

An Amount parameter controlling output scaling of each voice

The Grid module version of Segments also has standard envelope module options:

A stereo Gate In port, as well as a pre-cord to Gate on Notes

A stereo in and out port for an internal amplifier, under the control of the envelope signal

An Affect voice lifetime toggle to allow the module to keep voices active

NEW MODULATOR & GRID MODULE: CURVES (LFO) 

A freely drawable, segmented low-frequency oscillator

With all familiar LFO modulator/module controls

A set Rate (from 0.2 to 50) with regard to the set Timebase (either Hertz, Kilohertz, Bars or other beat-time units, Pitch (of current note), or Hold)

Both the Rate and Timebase can be modulated for each note, for example by Velocity (from the Expressions modulator), or any other source

This Rate –Timebase pair defines the speed of the oscillator, which defaults to a setting of 1 Hz

Phase parameter allows for full control of the envelope's position, small variations, or anything in between

Option to Enabling Smoothing, with Smoothing Time set in milliseconds/seconds

Both settings can be automated and modulated, for controlling the sharpness vs. smoothness of each voice, for example by Poly Pressure (from the Expressions modulator), or any other source

A Bipolar toggle (±) maintains the curve's shape but rescales it, so that the minimum value is -1 and the middle value is now 0 (zero)

The modulator version of Curves also has standard LFO modulator options:Five Trigger Mode options, similar to other LFOs:

Free - All voices play freely and never reset

Note - Each voice resets to the current Phase when it receives a note

Sync - Follows the relative phase (Phase + Global transport position) while transport is playing

Grv (Groove) - Follows the groove-relative phase (Phase + Global transport position, including groove) while transport is playing

Rnd (Random) - Each voice goes to a random position when it receives a note

An Amount parameter controlling output scaling of each voice

The Grid module version of Curves also has standard LFO module options:

A stereo Retrigger In port, as well as a pre-cord to Retrigger on Notes

A stereo Phase In port and input attenuator

A stereo Rate In port and input attenuator

A Phase Offset (R) control, for adjusting the right channel's phase in relation to the general Phase value

NEW POLYMER/GRID MODULE: SCRAWL (OSCILLATOR) 

A freely drawable, segmented oscillator

With anti-aliasing on the oscillator, to help make (almost) any shape work

With all familiar oscillator module controls

All the standard module pitch controls:

Key Tracking pre-cord, automatically connecting note pitches to the pitch buss

Numerator and Denominator controls, for controlling pitch via ratio

A Pitch Offset, for adjustment in semitones

A Detune control, for adjustment in Hertz, along with the Stereo Detune toggle for an inverse detuning of the right channel

A Retrigger on Notes pre-cord, for reseting the oscillator's phase at note on

The Polymer module version of Scrawl also has:

Phase Modulation Amount attenuator (range 0 % to 800 %) to allow modulation from the Sub

⬆︎SYNC⬆︎ toggle to enable hard sync from the Sub

The Grid module version of Scrawl also has standard oscillator module options:

A stereo Retrigger In port

A stereo Phase In port, with attenuator (range 0 % to 800 %)

A stereo Pitch In port and input attenuator

NEW GRID MODULE: SLOPES (DATA) 

A freely drawable, segmented sequencer

With all familiar data sequencer module controls, and their common phase-driven approach

A stereo Phase In port for controlling playback, along with a Use Device Phase pre-cord

A Bipolar toggle (±) maintains the curve's shape but rescales it, so that the minimum value is -1 and the middle value is now 0 (zero)

Anti-aliasing toggle enables smoothed playback of the curve

Mute when stopped option will force 0 (zero) output when the global transport isn't running

NEW GRID MODULE: TRANSFER (SHAPER) 

A freely drawable, segmented waveshaper

With familiar shaper module controls and form

Anti-aliasing (AA) toggle enables smoothed response of the shaper

Modulatable Drive control that goes in both directions (±24 dB), for pushing the incoming signal to interesting parts of the curve

A Bipolar toggle (±) maintains the curve's shape but rescales it, so that the minimum value is -1 and the middle value is now 0 (zero)

THE CURVE EDITOR 

Clicking any curve display opens the curve editor in a Pop-out Editor window

Seven tools are available:

Pointer [1] - For selecting and adjusting points and their curvature, etc.

Pencil [2] - For freehand drawing of shapes

Step [3] - A shape for creating flat lines within each grid line

Half Step [4] - A shape for creating flat lines that spend the first 50% of each step at the level set (the second 50% at 0 [zero])

Saw Up [5] - A shape for creating a ramp within each step from 0 (zero) to the level set

Saw Down [6] - A shape for creating a ramp within each step from the level set to 0 (zero)

Triangle [7] - A shape for creating a ramp within each step from 0 (zero) to the level set, and back to 0 (zero)

The numbers shown above represent the key command for switching to that tool while the curve editor is open

Set the grid for drawing with the 4 x 4 type control in the bottom left

The first number controls the number of horizontal, x (↔︎) divisions on the grid

The second number controls the number of vertical, y (↕︎) divisions on the grid

The Larger Beat Grid command (default mapping: [.]) also applies to the curve editor with the nearest duplet values

With a value of 8, this moves the beat grid to 16, then to 32, etc.

The Smaller Beat Grid command (default mapping: [,]) also applies to the curve editor with the nearest duplet values

With a value of 8, this moves the beat grid to 4, then to 2, etc.

The Next Beat Grid Subdivsion command (default mapping: [ALT]+[.]) also applies to the curve editor with the nearest triplet values

With a value of 8, this moves the beat grid to 12, then to 24, etc.

The Previous Beat Grid Subdivsion command (default mapping: [ALT]+[,]) also applies to the curve editor with the nearest triplet values

With a value of 8, this moves the beat grid to 6, then to 3, etc.

All of these key commands can be used even while the mouse is held down, adjusting the grid while drawing, for example

SNAP toggle visually hides the grid lines and disables all snapping with the Pointer tool

When SNAP is on, holding [SHIFT] temporarily disables it

Even when SNAP is off, all shape drawing tools continue to use the horizontal division to determine their drawing size)

The Toggle Snap command (default mapping: ) also applies to the curve editor, and can be used even while the mouse is held

Several interactions are available within the curve editor:

Selecting any point shows both that point's Value and its Curvature (to the next point) in the Inspector Panel

To move a segment between two points: hold [CTRL] ([CMD] on Mac) and drag up or down on a segment

To bend a segment: hold [ALT] and drag the area between two points up or down

To draw inverse curves (like an S-curve) around a point: hold [ALT] and drag up or down on the point

To draw identical curves around a point: hold [ALT]+[SHIFT] and drag up or down on the point

To move a point as well as all points follow it: hold [CTRL] ([CMD] on Mac) and drag the point

Right-clicking within the curve editor offers a menu of Transform options for adjusting the entire curve

The folder icon at the top left of the window allows saving your current curve, giving it a name, description, category, and any tags you wish to use

BWCURVE FILE FORMAT

All of these devices save and read BWCURVE files

Each file has a category that (by default) reflects which device was used to to make it:

Envelope for those saved in Segments

Periodic for those saved in Curves or Scrawl

Sequence for those saved in Slopes

Lookup for those saved in Transfer

[CTRL]-clicking ([CMD]-clicking on Mac) any curve display opens the curve browser

Browsing defaults to the device's file Category, but any BWCURVE file can be loaded by any device (just select Any Category)

All BWCURVE files require a point at time zero

Phase-driven devices — the oscillators, Curves and Scrawl, as well as the Slopes sequencer — place a matching point at the end of the cycle, connecting the first and last points of the cycle

When an envelope curve of free length is loaded into any of the other devices, its length is normalized

When a non-envelope curve is loaded into an envelope device, the curve is fit into the first "primary interval" of the envelope (from 0 to 1)

2. MODULATION ELEVATED — MODULATOR'S ON THE MIXER… 

Modulators have been available on the device level forever

Now tracks and the project level can have modulators as well

And whether you are working with the new curve devices or our other data sequencers, you can now work with your modulation data in a resizable Pop-out Editor

TRACK- AND PROJECT-LEVEL MODULATION

From the left edge of the Device Panel, headers now exist for every level from the Project, to any nested Group tracks, down to the current track level

If these are not visible, right-click anywhere in the Device Panel and enable Show group headers in Device Panel

Each of these headers has a Show Modulators button for opening that level's modulator pane

Insert and map modulators as you normally would

Available modulation targets for tracks include:

All device parameters on that track

All available mixer controls (volume, panning, mute, sends), which can all be mapped in the Inspector Panel or the Mixer Panel

Available modulation targets for group tracks include:

All device parameters on that track or within a child track

All available mixer controls on that track, or within a child track

Available modulation targets at the project level (via the master track) include:

All device parameters on any track

All available mixer controls on any track

All transport controls that are automatable on the master track (Tempo, global Crossfade, the Fill button, and all groove parameters [Groove on/off, Shuffle amount, Shuffle rate, Accent amount, Accent phase, Accent rate), which can be mapped either in the Mixer Panel, inside the Play menu, or from the transport area

On any track-level Inspector Panel, the Show Modulation Mappings by Source view (now the third button in the middle) starts with a chooser for setting the Track Modulators Note Source, so you can define where notes that trigger the modulators are coming from

This is the same for "normal" tracks, group tracks, and for the project-level, the master track

POP-OUT EDITORS FOR WORKING YOUR WAY

Sometimes your modulation data is as important as your automation, notes, or audio

A new Pop-out Editor offers a resizable pane for editing modulation data

This is especially nice the The Grid, giving a clear distinction between patching mode (where all the modules live together in a structure) and data editing mode (in the larger pop-out instead of forcing you to make your data sequencer modules large)

The new curve-based devices all have a Pop-out Editor:

The three modulators: Segments (Envelope), Curves (LFO), and Keytrack+ (Note-driven)

The five modules: Segments (Envelope), Curves (LFO), Scrawl (Oscillator), Slopes (Data), and Transfer (Shaper)

These all work in a standard way, as described above

Existing data sequencers also have their own custom Pop-out Editors now, available by clicking the small arrow button:

The modulator Steps (Sequence) has a smaller default shape (like ParSeq-8), and a Pop-out Editor with its data as well as its Bipolar and Step Count settings, buttons to nudge the visible sequence left or right a step, and functions to Clear and Randomize the entire sequence

The Grid module Steps (Data) has the same Pop-out Editor controls, as well as its Interpolation setting

The Grid module Gates (Data) has a Pop-out Editor with its data as well as its Step Count setting, buttons to nudge the visible sequence left or right a step, and functions to Flip (invert) and Randomize the entire sequence

The Grid module Probabilities (Data) has a Pop-out Editor with its data as well as its Step Count setting, buttons to nudge the visible sequence left or right a step, and functions to set All On (set each step to 100 %), to set All Off (set each step to 0 %), and to Randomize the entire sequence

The Grid module Pitches (Data) has a Pop-out Editor with its data as well as its Step Count, Octave Range, and Octave Offset settings, buttons to nudge the visible sequence left or right a step, and and buttons to nudge the entire sequence up or down by a semitone

3. NEW LAUNCHER GESTURES — PERFORM IN THE MOMENT… 

A performance is based on the "gestures" available to you

With more gestures available, you can go new places

And if you can decide how to trigger clips while playing, you can truly play in the moment

Good defaults can go along way, and setting them on the project level let's you quickly set the tone for each song

Finally, having some track parameters on the mixer can bring a performance alive

ON RELEASE ACTIONS

You have to press a clip (either via computer or controller) to trigger it. So maybe you'd like something to happen when you release the mouse or pad.

In addition to a Launch Quantization and Launch Mode setting, each clip also now has a Release Action setting. Options include:

Continue - Let the clip play and do nothing

Stop - Stops the clip

Return - Returns to the previously playing clip/Arrangement

Next Action - Trigger the clip's Next Action (where 20+ more options are available)

NEW LAUNCH MODES

A couple additional Play Mode options are now available as well for using different "legato" timing sources:

Trigger from Start (previously called from Start) - Plays the clip from its start

Legato from Clip (or Start) (previously used for Continue and Continue Quantized) - Starts relative to playing clip's position (or when nothing was playing, from clip start)

Legato from Clip (or Project) (new) - Starts relative to playing clip's position (or when nothing was playing, from transport position)

Legato from Project (new) - Starts relative to global transport position

The various "relative" timings take all factors into account, including various Operators that are cycle-aware (like Recurrence)

ALT TRIGGERS

Instead of programming the one way each clip can play, you can now program two methods for each clip and then choose which to use as you perform

The Main action is what happens when normally triggering and releasing each clip or scene

The ALT action happens when triggering a clip or scene while:

Holding down a controller's Shift button (like on the Novation Launchpad Pro MK3 or Akai APC 40 Mk2, etc.), or

Holding down the [ALT] key (when triggering from the computer)

So your three settings — Launch Quantization, Launch Mode, and Release Action — are duplicated, with parameters for the Main trigger action and parameters for the ALT trigger

The Project Panel has a new first page for all project-specific Settings, which including the following Clip Launcher Defaults:

Main Launch Quantization (previously Global Clip Quantize) - 1 bar, so wait for the next bar start

Main Launch Mode - Trigger from Start, play the clip from the beginning

Main Release Action - Continue, or do nothing on release

ALT Launch Quantization - Off, so clip starts immediately

ALT Launch Mode - Legato from Clip (or Project), playing "legato" from the previous clip's position

ALT Release Action - Return, and jumps back the previous state on release

Note that a swap button (⇄) switches all Main and ALT settings (also available via the Swap Normal and Alt Default Clip Launcher Settings command)

These project settings use Main as a normal queued trigger and ALT as the legato mode

Note that launch and release are distinct actions, so can launch a clip with the Main trigger, hold the pad, and then press controller "shift" to use the ALT trigger release action. And vice versa.

Clips default to Use Project Settings for all six of these values, meaning the settings in the Project Panel control every clip out of the box

Scenes also have their own bank of Main and ALT settings, which are used when the new Override Launch Settings toggle is on for the scene

TRACK & PROJECT REMOTES

In addition to track- and project-level modulators, there are also track- and project-level remote controls

Track/project remotes are configured the same as with devices, just with a larger scope

These remotes can be displayed in either Mixer Panel by enabling the Show Track Remotes view toggle

The Project Panel Settings page has a section of parameters labeled Remotes & Modulators:Show group headers in Device Panel - toggles whether group track and project-level headers should appear in the Device Panel

These headers are where remotes can be viewed/configured, where modulators must be created/mapped, and allow viewing the group or project in the Inspector Panel (including the channel strip controls and meters) by simply clicking on the header

Alias preset remotes on tracks - toggles showing preset remotes in the place of track remotes (when no track remotes are present)

Track remotes shown in mixer - allows you to show fewer than eight remotes in the mixer

Finally, the Project Panel has a floating Project Remotes section at the bottom of the panel:

When open, these remotes remain visible on screen no matter what page of the Project Panel you are on

This can pair nicely with the Sections page loaded, where you can keep all Launcher Scenes, Arranger Cue Markers, and Project Remotes accessible at once, no matter where you navigate with the rest of the application window

4. TOMORROW'S MODERN BROWSERS — STREAMLINED, SMARTER, FOCUSED ON SOUND… 

The browsers in Bitwig Studio have been remade

With a growing number of file types, having all results in one list is just better

Users browse in different ways so the new browsers support various workflows

In summary:

Sources provide solid starting points

Quick Sources customize your go-to choices for each production task

Filters help you narrow things down

And Searching is more powerful too, so you can always just start typing

IT STARTS WITH A SOURCE

From most any browser, clicking the "four squares" icon (⊞) at top left — or pressing [CTRL]+0 ([CMD]+0 on Mac) — takes you to the All Sources page, which is organized under four tabs:

PACKAGES - Bitwig sound packages, including available packages that can be installed

COLLECTIONS - User-saved groups including everything marked as Favorites, as well as fixed collections and dynamic smart collections

BY KIND - Groupings of content by various measures, and sometimes with sub-groupings under a vertical bracket (⎴):

All Instruments contains all instrument devices, plug-ins, and presets; it is the parent source of the individual sound-descriptive sources — Drum Presets, Basses, Keys, Synths, and Other Instruments

Drum Hits is a hybrid source comprising e-drum instruments, drum sound presets, and sample files identified as individual drums

Audio FX for all audio FX devices, plug-ins, and presets

Note FX for all note FX devices, plug-ins, and presets

Samples for all audio files, either in the Bitwig library or in one of your chosen sound content locations

Music for all audio files in your chosen music locations

Multi-samples for all MULTISAMPLE files (used by both Sampler device and Grid module), either in the Bitwig library or in your chosen sound content locations

Impulses for all BWIMPULSE files (used by the Convolution device), either in the Bitwig library or in your chosen sound content locations

Wavetables for all WT files (used by both the Grid/Polymer Wavetable module and the Wavetable LFO modulator & Grid module), either in the Bitwig library or in your chosen sound content locations

Utility for devices and presets in the Utility categories, as well as devices in other special function categories (Analysis, Container, Hardware, MIDI, and Routing)

All Presets is the parent source of the Bitwig Presets and Plug-in Presets sources

All Devices is the parent source of the Bitwig Devices and Plug-ins sources

Modulators is available in the Browser Panel, allowing one or more modulators to be dragged into a device's modulator pane

Modules is available in the Browser Panel, allowing one or more Grid modules to be dragged into a Grid device's editor window

Samples + Clips is a parent source for all timeline materials, including the Samples, Note Clips, and Audio Clips sources

LOCATIONS - for local folders sources, including (your) My Library, each of your chosen content, music, and plug-in location folder, as well as the File Browser (for the Browser Panel) and the special Everything source for searching across, um, everything

Clicking a source switches to the browsing page for finding results from that source

Any source can be dragged into that browser's Quick Sources, giving access to your preferred sources for various contexts

QUICK SOURCES, FOR GRABBING WHAT YOU WANT IN ANY CONTEXT

Different contexts provide both an appropriate default source, and the option to make your own Quick Sources for that context

Contexts include:

Browsing where an instrument is expected (or when adding a new track), which default to the All Instruments parent source

Browsing where audio signal is expected, which defaults to the Audio FX source

Browsing where note signal is expected, which defaults to the Note FX source

Browsing within an empty Sampler device, which defaults to an Everything source showing audio and MULTISAMPLE files

Browsing within an empty Drum Machine cell, which defaults to the Drum Hits source

Browsing within an empty Launcher slot on a note track, which defaults to the Note Clips source

Browsing within an empty Launcher slot on an audio track, which defaults to the Samples + Clips parent source

Browsing within an empty Launcher slot on a hybrid track, which defaults to the Samples + Clips parent source

Browsing in the side Browser Panel, which like all the above contexts, stores its own Quick Sources as you have customized them

Drag items in any Quick Source area to reorder them

The default shortcuts are for [F1] to Select Everything (always the first source), and for [F2] thru [F9] to select the next eight Quick Sources, respectively

Clicking to a different Quick Source switches to that source and preserves all possible filters

Clicking on the current Quick Source clears all filters

Right-click any Quick Source area to either Remove an individual item, or to Restore Quick Sources to defaults

FILTERING YOUR RESULTS, AND MORE

Filters are available for narrowing your results

When appropriate, a Source will have a useful filter open by default

Irrelevant filters aren't shown

Filter options include:

Category [C] - showing the set category for devices, plug-ins, and presets (for example, clicking the Keys sound source will offer the Electric Piano, Organ, and Piano categories)

Location [L] - for choosing between My Library, all sound Packages or a particular one, or any of your indexed folders

Tags [T] - showing the most common tags in fixed order up, with other most relevant tags below

File Kind [F] - for limiting the type of files shown

Device [D] - for only seeing presets from one device (such as Chain) or from one device category (think The Grid)

Creator [C] - for limiting preset or device results to one or more sound creators

Vendor [V] - for quick sorting of plug-ins by manufacturer

Favorites only [*] - when the star up near the Source name is clicked, only results that you have marked as a favorite will be shown

Each character shown above represents the key command for switching directly to that filter from a result in the list

Pressing [X] clears all current filters

For better filing, you can press the [0] number key to add the selected item to your Favorites collection

You can also press the [1] thru [9] number keys to assign the selected item to your first nine collections (right-click in either browser to see the key commands and the collection they correspond to)

A few more default keyboard navigation notes:

When in the search field or in a new browser window, [↓] key jumps into the results list

will always jump to the search field

Pressing [→] when a device is selected enables the special Show [Device] Presets mode, which can be exited with [←]

The Pop-up Browser is oriented horizontally, so:

The [←] and [→] arrow keys move focus between the filter and results sections

[CTRL]-[ALT] ([CMD]-[ALT] on Mac) + [←] and [→] move between the available filters

[CTRL]-[ALT] ([CMD]-[ALT] on Mac) + [↑] and [↓] move between the Quick Sources

[PAGE UP] jumps to the search field

The side Browser Panel is oriented vertically, so:

[PAGE DOWN] and [PAGE UP] move focus between the search field, filter section, and results section

[CTRL]-[ALT] ([CMD]-[ALT] on Mac) + [↑] and [↓] move between the available filters

[CTRL]-[ALT] ([CMD]-[ALT] on Mac) + [←] and [→] move between the Quick Sources

There are also two choices for preserving your current browser state:Right-click in the browser and choose Save Snapshot… to save the current source, search term, and filters in an editable form

Restore a snapshot by right-clicking in the browser and selecting its name

Right-click in the browser and choose Save Smart Collection… to save the search term and filters in an fixed form (limiting your search results and available filter choices to the current selections) as a new source

Creating a new smart collection automatically adds it at the end of to your current Quick Sources, showing a magnifying glass icon in the color you selected

POWER SEARCHING TIPS

Searching is now better than ever, so just start typing what you want

New and inferred metadata helps:Bitwig devices are now more deeply indexed. For example:

Searching for fm will give you various devices that do frequency (or phase) modulation

Searching for sync in the modulator browser shows you various devices that have beat-sync options

Searching for smooth in a Grid editor (or the side Browser Panel) will return various averagers, envelope followers, and filters

Just try things.

All sample files are now indexed in new ways:

Filenames and parent folder names are searched for common keywords

Categories are applied based on common keywords, such as break (category: Drum Loop), ride (category: Cymbal), or sweep (category: Sound FX), etc.

Tags are applied when they match known tags in Bitwig Studio

Together, this makes searching for samples much closer to presets and plug-ins

Preset discovery for CLAP plug-ins mean they can also have their presets indexed with tags, creators, etc.

Autocomplete suggestions keep you on track:

If your search matches a source or relevant filter, a blue autocomplete suggestion will appear, letting you hit [TAB] and jump to that suggestion

Suggestions also include searches appropriate to a different source, so just hit [TAB] to accept the suggestion and Bitwig will take you there

A couple example cases:

When searching in the side Browser Panel for Samples + Clips, typing dru will offer ⇥ Drum Loop for jumping to the Drum Loop category

When searching under Samples + Clips, typing ark finds few results in that source so ⇥ Everything is suggested

When searching under Everything, typing ark will offer ⇥ Arksun which sets the Creator filter

NEW FEATURES

The Bitwig Studio application is now localized in ¡Spanish! and Korean~^^

The language is set from the Dashboard under Settings > User Interface > Language, at the top of that page

Device and parameter names are the same, but most functions, labels, and in-app documentation (for the 350+ devices and modules) are translated and current as of Bitwig Studio v4.4

All non-English localizations will be updated for Bitwig Studio v5 during beta

The audio preview player in all browsers now has a setting for how audio is previewed and imported:

Play at Original Speed (audio icon) plays the audio back at its original length, with no pitch/speed change

Stretch to Project Tempo (music note icon) stretches the audio file to match the current project tempo

This setting is stored as a preference (Dashboard > Settings > Behavior > Audio Import/Preview)

Several controller scripts already support the ALT-trigger shift button behavior, including:

Controller script added for Novation Launchpad Pro MK3

Controller script added for Novation Launchpad X (via reassigning the Rec Button)

Controller script added for Novation Launchpad Mini MK3 (via the special 4th row buttons)

Controller script added for Akai APC Mini MK2

Controller script added for Akai APC Key25 MK2

Controller script updated for Novation Launchpad Pro (MK1)

Controller script updated for Akai APC40 MKII

Additional documentation will come during beta

Each controller connected is now shown with icons in the top right of the application window; clicking any icon opens a pane with access to:

The controller's help and system-level settings

Visualizations of the controller's current remote bank

The Track / Device navigation and pinning options (previously in the Studio I/O Panel, which is now called the Output Monitoring Panel)

A new Mode option for setting what remotes the controller will follow while you click in Bitwig interface (default value is Any track / device selection, which means it will follow any item you click on)

Bitwig Studio has a new audio onset detection algorithm, improving the timing accuracy of onsets

Bitwig now keeps track of your last fired scene as the target scene, visualized by underlining the scene's nameWhen you entering mapping mode (by clicking on the Mapping Browser Panel in the lower right), the Mix View now has five new icons beneath the scenes for mapping:

The play triangle with a minus (▶︎⁻) will Launch Previous Scene

The play triangle alone (▶︎) will Launch Target Scene

The play triangle with a plus (▶︎⁺) will Launch Next Scene (just mapping this one function to a button would let you advance thru your entire project)

The upward triangle (▲) will Target Previous Scene

The downward triangle (▼) will Target Next Scene

Also, a play triangle button (▶︎) appears on each track, for launching that track's clip at the current target scene

While in modulator mapping mode, holding [ALT] will let you interact with parameters normally (so hold [ALT] to adjust parameter values, then let go to return to modulator mapping)

New Keytrack+ (Note-driven) modulator: Uses an embedded curve component (like the MSEG devices) for drawing, saving, or loading keytracking curves

The previous modulator Keytrack is now called Relative Keytracking, with a modified interface and added Amount control

New Select Out (Mix) Grid module: Binary selector between two outputs

Select In (Mix) Grid module is the new name of the old Select module, offering a binary switch between two inputs

New Amplify (Level) Grid module: Signal amplifier set in percentage (up to 800 %)

New Pinch (Level) Grid module: Imposes an S-curve onto an audio signal, with Stereo-ize option

New Freq → Pitch (Pitch) Grid module: Hertz (or kilohertz) to pitch converter, with optional stereo detune

New Pitch → Freq (Pitch) Grid module: Pitch to Hertz (or kilohertz) converter, with optional stereo detune

New Exponents (Math) Grid module: Provides a power of the incoming signal, with various Base options ( 2ˣ, eˣ, and 10ˣ)

New Roots (Math) Grid module: Provides a root of the incoming signal, with Degree an integer parameter between 1 and 9

SVF (Filter) Polymer/Grid module: Now has a Notch mode

CLAP Plug-ins: Can now share their remote control banks with Bitwig, showing them in the device's Remote Controls

CLAP Plug-ins: Now have parameter indications like Bitwig devices, showing when automation or a hardware mapping is taking place

IMPROVEMENTS

In the Device Panel, the Remote Controls toggle on devices and track headers now doubles as a mapping indicator:

When the knob is surrounded by a solid orange circle (◯), an entire remote control bank is currently under control

When the knob is surrounded by a dashed orange circle (◌), some parameters are currently under control

When the knob is undecorated, no parameters are currently under control

Automation dots on parameters are now color-coded to their status:

A blue dot means the automation is in control and playing back

A green dot means the automation is current being overridden and can be restored

A red dot means automation is being recorded

A gray dot means automation is present but not currently being played

Micro-pitch expressions can now be drawn and recorded to a range of ±128 semitones

The Next Action section of the Launcher clip Inspector Panel has been reworkedA power button toggle sets whether the Next Action is set to play after the clip or not

As on Release actions can now trigger the Next Action, the function can be selected even when the toggle is off

By default, the Next Action timing is set in loop iterations (the loop icon button), with a value of 1x, or trigger after the clip plays once

You can adjust the number of loop counts, or disable the loop icon to set the time in free bars and beats

Next Action for Launcher clips now fire at the designated time, even if set in the future

Previously, Next Action for non-looping clips would trigger immediately after the clip ended. If you prefer this behavior, set the Next Action to be linked and fire after one playback cycle (1x)

When mapping a modulator, the detail panel of the source modulator now remains open [31670]

When dragging modulator mappings, detail panels now remain open [30606]

Classic LFO & LFO (LFO), and ParSeq-8 & Steps (Sequence) modulators: All allow negative phase values now, so timing can easily be adjusted as slightly later or earlier

Oscilloscope (Display) Grid module: Now has a Stereo-ize mode, that shows the first in port's signal in its color (left channel) and white (right channel)

LFO (LFO) modulator: Now has Groove (Grv) Trigger Mode, for syncing to groove timing on playback

Ramp (Envelope) modulator: Now has an Ignore Notes option to start new ramps at the destination point. Good for using Ramp as a gliding toggle (via the Invert parameter), etc.

Exp (Math) Grid modules: Now has a Base parameter for choosing between 2ˣ, eˣ, and 10ˣ of the incoming signal (x), which can be set by right-clicking on the module itself

Log (Math) Grid modules: Now has a Base parameter for choosing between log₂x, logₑx, and log₁₀x of the incoming signal (x), which can be set by right-clicking on the module itself

Transport (LFO) Grid module: Is more visually similar to the Device Ø section of all Grid device Inspectors

Is also part of a right-click swap group of "phase providers," for going between Phase In (I/O) ↔︎ Transport (LFO) ↔︎ Phasor (Phase) ↔︎ Clock (LFO)

Voice Stack modulator: Default mode is now set to 0 to +1, since this is unique

Several right-click parameter/setting options are now available:

Right-clicking any track solo button (either in Arranger track headers, or on the Mixer Panel) give options for toggling the Solo as Cue and Exclusive Solo preferences

Oscilloscope and Spectrum (Analysis) devices: You can right-click on these devices now to switch between the Mini (default) and Wide Device View options

Pitch In (I/O) Grid module: Now can be right-clicked to change its Voice Priority setting (Default method, or the Lowest, Last, or Highest note) via context menu

Mod Delay (Delay/FX) Grid module: Now can be right-clicked to change its Clip Mode (for Feedback) setting via context menu

Blend (Mix) Grid module: Now can be right-clicked to change its Blending Mode setting (for crossfading with Equal Gain or Equal Power) via context menu

Velo Mult (Level) Grid module: Now can be right-clicked to change its Response setting (either Linear for straight multiplication, or Perceptual, the loudness-friendly default) via context menu

= and ≠ (Math) Grid module: Now can be right-clicked to toggle the Exact Matches Only setting via context menu

Value Readout (Display) Grid module: Now can be right-clicked to toggle the Voice Shown setting (either Last voice only, or a summed All voices) via context menu

Module has also been reconfigured for better display of user-provided names

Mixer Panel view toggles have been reorganized and beautified, as have other layouts and graphics thru out the program

Various controller mapping updates:

The visualization color for each controller (painting the current clip targets in the Launcher, etc.) is now adjustable, as well as other style improvements

Parameter context menu lists all active mappings from controllers and the computer keyboard

Parameters that are mapped manually now show indication symbols (just as auto mappings from a controller script do)

New preferences that are now available:

The amount of sequencer Latency can now be adjusted, changing the window within which Launcher clips are triggered (Dashboard > Settings > Behavior > Sequencer)

The bit depth of new audio can now be set separately, for the Recording Resolution and the Bounce Resolution, including a 32-bit (floating-point) option (Dashboard > Settings > Recording > Created Audio)

You can now Prefer CLAP over VST versions of plug-ins, when both are available (Dashboard > Settings > Locations > Plug-in Locations)

FIXES

Distortion device: Fixed issues when the device wakes up after sleep [31090] [31043]

New FL Studio (FLP) files can be imported [30864]

Linux: Re-enabled VSync on X11 [27603]

Mapping transport position or loop setting positions now has a usable range [31558]

Et cetera

Edited by ralfrobert
  • Like 4
Link to comment
Share on other sites

3 minutes ago, ralfrobert said:

MSEG, new browser, modulation everywhere, performance gestures, various stuff. 

Sorry for the long post. I think the changelog is only available in the account, so I put it here in case someone wants details. 

That’s ok. Of course, I was joking, there’s a lot of stuff there.

  • Like 2
Link to comment
Share on other sites

3 minutes ago, jngnz said:

This is the best DAW out there and if you disagree you obviously have a different opinion and that's perfectly okay.

I have an active plan and like the additions of this update. Bitwig really feels like 21st century. Most innovative DAW around. 

  • Like 1
Link to comment
Share on other sites

Just now, kevin H said:

Had to recharge my cell phone battery twice to fully scroll through first post hahah

Poor you :)

But now that the first videos pop up, other people can just scroll down and save battery power, but waste lots of megabytes of bandwidth. 

  • Haha 1
Link to comment
Share on other sites

6 minutes ago, ralfrobert said:

... and Beta 2 is ready to download. Fixes a crash at startup. I guess they will be working overtime today. 

This very much explains my "wait, didn't I click this already" situation.

Link to comment
Share on other sites

1 hour ago, jngnz said:

This is the best DAW out there and if you disagree you obviously have a different opinion and that's perfectly okay.

Just curious, what are the top 10 things (in your opinion) that make it supremely better than either CbB or Studio One. Please, no bashing of the two products, just what you know is infinitely better.

  • Like 1
Link to comment
Share on other sites

18 minutes ago, Bapu said:

Just curious, what are the top 10 things (in your opinion) that make it supremely better than either CbB or Studio One. Please, no bashing of the two products, just what you know is infinitely better.

I don't know CbB.

Love Studio One, so I'll probably not make it to 10 but here are some things:

1) plugin performance. It's the only DAW handling plugins even better than Reaper.
2) handling Rosetta plugins. It bridges them with stellar performance instead of having to run the entire DAW in Rosetta mode.
3) startup time (plugin caching, really)
4) project load time
5) sandboxing plugins so they don't crash the audio engine or entire DAW
6) MPE and automation. Studio One really can't handle too much of either.
7) plugin chaining
8) the plugin manager. It's just more logical to me and also customisable.
9) FX track management. Not having to route shit and also seeing and being able to modify the send amount of every connected channel at the same time.

Damn, almost 10.

 

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

31 minutes ago, Bapu said:

Just curious, what are the top 10 things (in your opinion) that make it supremely better than either CbB or Studio One. Please, no bashing of the two products, just what you know is infinitely better.

I have a licence but have not got into it, it seems pretty alien to me, which could explain why some people prefer it to CbB or S1.

I have not paid the WUP so I guess I wont be upgrading.

Link to comment
Share on other sites

46 minutes ago, Bapu said:

I bought (got for free?) the 8 track version and really have not delved into it yet, Maybe I used it to play a demo song, maybe not

Me too. But found it too limited as to the number of VST plugins you can use (max 2 plugins per project), so  I gave it up.

Bapu, this one ain't for you! ?

Link to comment
Share on other sites

1 hour ago, Bapu said:

Just curious, what are the top 10 things (in your opinion) that make it supremely better than either CbB or Studio One. Please, no bashing of the two products, just what you know is infinitely better.

The way it handles track templates and effects presets.

In Cakewalk, when you create a track template the only way of organizing them is by the paths you store the files in.

In Bitwig, you save your track templates with tags so you can search for them by  tags.

In Cakewalk, when you save an effects preset it gets saved under a container.  This can be nice if you want to only expose a few parameters in the underlying effects.  If that isn't what you want, you have to take an extra step to get rid of the container.  And you can actually insert an FX chain without the container, but you need to navigate through the file system to open the FX chain and then use Shift-Open to open it.  

In Bitwig the container is transparent and you can access the effects simply by clicking on them.

 

  • Like 1
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...