Larry Shelby Posted March 31, 2022 Share Posted March 31, 2022 Run the IK Product Manager to update 1 4 Link to comment Share on other sites More sharing options...
telecode 101 Posted March 31, 2022 Share Posted March 31, 2022 no. i refuse. too afraid of the update. 1 3 Link to comment Share on other sites More sharing options...
Larry Shelby Posted March 31, 2022 Author Share Posted March 31, 2022 (edited) It's the same except for the addition of the "Tonenet" option, which apparently doesn't work... because even though I've created an account and logged in, Tonenet keeps telling me I'm not, and won't load anything...another stellar roll out! Edited March 31, 2022 by cclarry 1 Link to comment Share on other sites More sharing options...
ALC Posted March 31, 2022 Share Posted March 31, 2022 (edited) Quote Changes from version 5.3.0: Introducing ToneNET preset sharing community* Added Apple M1 support Added CPU optimization for MESA Boogie 2 Collection models Fixed potential crash with Vibratone aux cabinets Fixed GUI issues related to T-REX Mudhoney *Please Note: To access ToneNET, please register a valid ToneNET account first. For more info, visit www.tone.net M1 support. Yes, finally! Edited March 31, 2022 by ALC 1 Link to comment Share on other sites More sharing options...
Jacques Boileau Posted March 31, 2022 Share Posted March 31, 2022 I'll give it a try later on to see if they fixed last summer's CPU usage issue. I'll report back. 4 2 Link to comment Share on other sites More sharing options...
Larry Shelby Posted March 31, 2022 Author Share Posted March 31, 2022 Ok...fifth try was the charm! Now the presets show up! Must not have been ready yet... 2 Link to comment Share on other sites More sharing options...
TheMaartian Posted March 31, 2022 Share Posted March 31, 2022 Still throwing a 103 error message for me after multiple tries. Tone.net user profile verified. YAIKMUNRFPT Yet Another IK Multimedia Update Not Ready For Prime Time 2 Link to comment Share on other sites More sharing options...
Jacques Boileau Posted March 31, 2022 Share Posted March 31, 2022 Ok, unfortunately the CPU behavior is still there. Here is the difference in CPU usage between version 5.0.3 and 5.4.0 on my PC. This is by just starting the standalone version with the default preset and giving it time to stabilize. 5.0.3 - 2% 5.4.0 - 4.5% If I do the routing switch thing, click on the two amp routing and back to the single amp routing, the CPU usage for 5.4.0 goes down to a little less than 3%. Same behavior as with all versions after 5.0.3. 8 Link to comment Share on other sites More sharing options...
LAGinz Posted March 31, 2022 Share Posted March 31, 2022 Hey Peter (I know you’re out there?) Any idea when this CPU issue is going to be addressed? It’s definitely been awhile now, and I’m getting the feeling that a lot more attention is going toward new offerings than fixing the old ones. 2 Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted March 31, 2022 Share Posted March 31, 2022 24 minutes ago, LAGinz said: Hey Peter (I know you’re out there?) Any idea when this CPU issue is going to be addressed? It’s definitely been awhile now, and I’m getting the feeling that a lot more attention is going toward new offerings than fixing the old ones. Please reply to your support ticket, there were CPU fixes in this update so if you are experiencing other CPU issues they would know the status of those. Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted March 31, 2022 Share Posted March 31, 2022 Also please heed this note, and if it is unclear it means that you cannot log on to ToneNET with your IK username/password you must go through the wizard to set up your ToneNET account. Similar to our forum, it is connected but requires additional information and such so there's a short wizard to go through before you can access ToneNET. Link to comment Share on other sites More sharing options...
Sidney Earl Goodroe Posted March 31, 2022 Share Posted March 31, 2022 Works fine on my old Asus desktop but no connection on my Toshiba laptop! Must say startup time is much better!! 2 Link to comment Share on other sites More sharing options...
Jacques Boileau Posted March 31, 2022 Share Posted March 31, 2022 2 hours ago, Peter - IK Multimedia said: Please reply to your support ticket, there were CPU fixes in this update so if you are experiencing other CPU issues they would know the status of those. I don't know if @LAGinz has a ticket open for this since I was the instigator of the CPU problem back in September. So, I just did respond to my ticket and will post any answer I get. But to be fair, I have had back and forth conversation on this through the ticket for over 6 months now. I know you have also chimed in to support on my behalf. Thanks! But it has been a looong time and there have been quite a few releases in the past 6 months. The problem is still the same and easily reproducible in 5.4.0. Please don't blame me for being a tad discouraged. I probably spent more hours researching and documenting the problem for IK than would be required to fix it. 1 2 Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted March 31, 2022 Share Posted March 31, 2022 I bumped it again, I was told the MESA 2 specific CPU optimizations were separate from what you have reported and it is being worked on. Thanks! 2 1 Link to comment Share on other sites More sharing options...
TheMaartian Posted April 1, 2022 Share Posted April 1, 2022 11 hours ago, Peter - IK Multimedia said: Also please heed this note, and if it is unclear it means that you cannot log on to ToneNET with your IK username/password you must go through the wizard to set up your ToneNET account. Similar to our forum, it is connected but requires additional information and such so there's a short wizard to go through before you can access ToneNET. Not sure what you mean. I clicked on the ToneNET link in the v5.4.0 update, which opened a Chrome window and took me to a page where I created a ToneNET alias for my IKM account. Back in AT5, all I get is the 103 error. When I click on the globe icon to the right of the big ToneNET button, I'm taken to an IKM ToneNET web page that shows me logged in with the alias I created. The initial wizard you refer to is no longer available in AT5, so I'm stuck. Link to comment Share on other sites More sharing options...
Doug Rintoul Posted April 1, 2022 Share Posted April 1, 2022 (edited) 34 minutes ago, John Maar said: Not sure what you mean. I clicked on the ToneNET link in the v5.4.0 update, which opened a Chrome window and took me to a page where I created a ToneNET alias for my IKM account. Back in AT5, all I get is the 103 error. When I click on the globe icon to the right of the big ToneNET button, I'm taken to an IKM ToneNET web page that shows me logged in with the alias I created. The initial wizard you refer to is no longer available in AT5, so I'm stuck. I was having the same problem. When I clicked on the globe, it took me to my tonenet account and I could see all 849 presets in the web browser, but Amp5 still gave me a 103 error. So I fired up the product manager and reauthorized Amp5. Then when I loaded Amp5 and clicked in tonenet, it finally connected and downloaded the preset list. Not sure if reauthorizing was what fixed the problem but it is worth a try. Edited April 1, 2022 by Doug Rintoul Link to comment Share on other sites More sharing options...
TheMaartian Posted April 1, 2022 Share Posted April 1, 2022 (edited) I did some more clicking around, shut down AT5, walked my dogs for an hour along the bay down by Le Moulleau, came back and voila!, there was ToneNET working in AT5. Must have been the dog walk. ? Loving France, still working on my feelings for IKM. ? Edited April 1, 2022 by John Maar 3 1 Link to comment Share on other sites More sharing options...
Nick Blanc Posted April 1, 2022 Share Posted April 1, 2022 2 hours ago, John Maar said: I did some more clicking around, shut down AT5, walked my dogs for an hour along the bay down by Le Moulleau, came back and voila!, there was ToneNET working in AT5. Must have been the dog walk. ? Loving France, still working on my feelings for IKM. ? The world is not fair! You are drowning in sunlight and nice weather and your IK problems are gone like...snow in the sun. Where for me, I'm having the same UNO Drum issues as I had with my old PC. Support wasted a little bit of my time not reading my ticket thoroughly that I'm working in Ableton and wanting the UNO working with the VST and over MIDI/USB instead of just MIDI. Now I didn't have a lot of time the last few days to follow up on their suggestions, so I'm wasting time as well. And now I know the cause! Because this is what I woke up to this morning: And the view from my work is not bad either: I think I'm staying in this weekend to troubleshoot. Except for a nice local blues festival this sunday. 2 Link to comment Share on other sites More sharing options...
telecode 101 Posted April 1, 2022 Share Posted April 1, 2022 On 3/31/2022 at 7:21 AM, cclarry said: It's the same except for the addition of the "Tonenet" option, which apparently doesn't work... because even though I've created an account and logged in, Tonenet keeps telling me I'm not, and won't load anything...another stellar roll out! yup. i have not been able to get tonenet to work for me either. i can never login. it keeps rejecting me. 1 Link to comment Share on other sites More sharing options...
telecode 101 Posted April 1, 2022 Share Posted April 1, 2022 On 3/31/2022 at 7:39 AM, Jacques Boileau said: I'll give it a try later on to see if they fixed last summer's CPU usage issue. I'll report back. what is CPU usage issue? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now