Juice Man Posted January 23, 2022 Share Posted January 23, 2022 Hello, I hope that you all are doing well. For some reason my sustain pedal has suddenly stopped working in the Sonar DAW. I ran MIDI Ox to see if the pedal itself is working. It is. However it reads "portamento" instead of "sustain". I have attached a screen capture from MIDI Ox to this post. The MIDI light meter lights up in Sonar when I press the pedal, but nothing is happening. The pedal also works with my analog devices. Can someone help me out? It also isn't working with Kontakt. Thanks! Link to comment Share on other sites More sharing options...
user 905133 Posted January 23, 2022 Share Posted January 23, 2022 (edited) Is the CC for the pedal configurable? If it previously also output 0x41, were you using a map to change it to 0x40? Maybe a map got changed? Also: how is the pedal getting into your PC [i.e., what gear]? Maybe that's where the mapping was done and somehow it got changed? Edited January 23, 2022 by User 905133 Link to comment Share on other sites More sharing options...
Juice Man Posted January 23, 2022 Author Share Posted January 23, 2022 (edited) Now the notes are all sustained when the pedal is NOT engaged. Then, when I press the pedal all of the notes are muted. Very odd. It is a simple "Lead Foot" LFD1-MKII pedal. Edited January 23, 2022 by Justin Curfman Link to comment Share on other sites More sharing options...
Juice Man Posted January 23, 2022 Author Share Posted January 23, 2022 The pedal is going into a Komplete Kontrol MIDI controller and the controller is going into a Focusrite Scarlett Solo then into a computer. Link to comment Share on other sites More sharing options...
Juice Man Posted January 23, 2022 Author Share Posted January 23, 2022 Now, suddenly, it sort of just behaves somewhat randomly with each instrument. Link to comment Share on other sites More sharing options...
msmcleod Posted January 23, 2022 Share Posted January 23, 2022 Check you've not got it set as a SHIFT key within Keyboard Shortcuts: I normally set it to something like 120, which is unlikely to be used by anything else. Also, make sure MIDI is unchecked in this page. Link to comment Share on other sites More sharing options...
Juice Man Posted January 23, 2022 Author Share Posted January 23, 2022 I have it set like yours, but it's still acting strange. If I choose a piano voice, for example, the notes will mute when I press the pedal. Then when I release the pedal, they will sustain. It is working backwards. Very odd. Any other suggestions? Link to comment Share on other sites More sharing options...
Juice Man Posted January 23, 2022 Author Share Posted January 23, 2022 You won't believe this... Someone simply flipped the polarity switch without me knowing. ? I flipped it back to standard mode. How embarrassing! Thank you all for your help, regardless! Too kind! Link to comment Share on other sites More sharing options...
bitflipper Posted January 23, 2022 Share Posted January 23, 2022 Most sustain pedals have a switch so you can configure it as either momentary-on or momentary-off. It can sometimes get accidentally toggled. Another thing that happens a lot with sus pedals is that the microswitch connected to the pedal can fail or become intermittent. Switches are rated for a given number of activations, and sustain pedals activate them a lot. Another common problem is broken TS connectors. If yours unscrews (as opposed to being molded), take a look inside at the connections. If you have an ohmmeter you can easily test the output of the pedal. You should measure an open circuit until the pedal is depressed, at which time the resistance will fall to zero or near-zero ohms. Fortunately, sustain pedals are fairly cheap. I'd just be inclined to get a new one. If it turns out to not be the problem, you'll still have a backup for the day when it does eventually fail. [EDIT] we were typing at the same time. Glad you got it sorted. Link to comment Share on other sites More sharing options...
user 905133 Posted January 23, 2022 Share Posted January 23, 2022 4 hours ago, Justin Curfman said: You won't believe this... Someone simply flipped the polarity switch without me knowing. ? I flipped it back to standard mode. How embarrassing! Thank you all for your help, regardless! Too kind! I believe it. Stuff like that happens!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now