Pete Laramee Posted December 13, 2020 Share Posted December 13, 2020 (edited) New computer. 10th Gen i7, 32GB ram, 1TB SSD (75% free space), and 2TB HDD (80% free space). I had the buffer at 512 for playback and was getting dropouts. I've since changed the playback buffer to the max at 1024 and I'm still getting occasional dropouts. ERROR code (1). Average song has a total of about 36 audio tracks, 6 buses, 60 or so sonitus effects and one instance each of Izotope Ozone, LP64, and Boost 11. Cakewalk by Bandlab 64 bit. I also have 8.5PE installed, but don't use it. I'm not super computer savvy. I'm keeping the song files on the hdd...should I move them to the ssd? Does my interface have anything to do with it? It's a 3rd gen focusrite 18i20. Is my computer not enough? Maybe an i9? Any ideas? Edited December 13, 2020 by Pete Laramee More Info Link to comment Share on other sites More sharing options...
msmcleod Posted December 13, 2020 Share Posted December 13, 2020 If you're using ASIO mode on the 18i20, and you're using Focusrite's own ASIO driver, you should have absolutely no problems with dropouts in normal use. I've personally had issues with Izotope Ozone... this could be a factor. Also, the LP64 needs a lookahead buffer so it significantly increases latency, but it shouldn't cause dropouts. You could try resetting your AUD.INI by going to Preferences->Audio->Configuration File, and clicking the "Reset Config to Defaults..." button. The only thing I'd recommend changing from the defaults is "Thread Scheduling Model", which I have set at 2. Having a very low DroputMsec value will cause issues, but the default of 250 should be absolutely fine. Also make sure your Cakewalk program directories, plugin directories, any sample directories used by plugins and your Cakewalk project directories are excluded from virus scanners / cloud sync apps. FWIW I'm using a 1st gen 18i20 with a 3rd gen i7 + 16GB RAM, and I'm using an ASIO buffer size of 64. I hardly ever get dropouts, and if I do, I just up the buffer size to 128. 2 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 13, 2020 Author Share Posted December 13, 2020 I'll give it a shot. Thanks for taking the time. Pete Link to comment Share on other sites More sharing options...
bitflipper Posted December 13, 2020 Share Posted December 13, 2020 Error 1 (buffer underrun) is the most common dropout code. It means that the computer couldn't fill the output buffer fast enough, so when the interface went to grab the next piece of data there wasn't anything in there. In short, the computer just couldn't keep up. Since increasing your buffer size didn't help, you're going to have to do some detective work. Something is preventing your CPU from having enough time to fill those buffers, and it probably has nothing to do with your project or your Focusrite. I've run over 80 tracks from a conventional drive (I also have a Focusrite, similar model but with Firewire) without dropouts. And my computer's not nearly as heavy-duty as yours. Your problem is that the CPU is dividing its attention between the DAW and something else. What could that something-else be? Wi-fi adapters are a frequent culprit. If your computer has one of those, try turning the wi-fi off and see if that makes a difference. But any hardware device can potentially cause similar problems. There are also dozens of background processes that can eat CPU cycles. You're going to have to do some sleuthing. I know, you just want to make music, not be a computer technician. Sadly, sometimes you have no choice. One tool that's often helpful is called LatencyMon from Resplendence. It's free. If your issue is with hardware, LatencyMon will tell you. Interpreting the information it provides can be a little confusing, but they do have some good tips on their site, and you can post the results here so somebody can have a look at them. Also check Task Manager, or better, Process Explorer. This free tool will show how much CPU each process is using, and thus identify any background process that's being too greedy with your precious CPU cycles. Given that it's a brand-new computer, I'd first look for bloatware that often comes preinstalled on new computers. Vendors will throw all kinds of useless crap in there (because software companies pay them to), and some of it is network-intensive (not good; network traffic trumps everything else, including audio). Getting rid of that garbage will make your computer happier in general, not just the DAW. BTW, what's your project sample rate? 4 3 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 13, 2020 Author Share Posted December 13, 2020 (edited) I set the changes recommended by msmcloud. It's better, but I'm still getting dropouts...even when the system is at rest w/out playback. Maybe it's not related, but I'm also getting the following error... Sample rate is 44.1 Thanks for your help! Pete Edited December 13, 2020 by Pete Laramee More Info Link to comment Share on other sites More sharing options...
Bruno de Souza Lino Posted December 13, 2020 Share Posted December 13, 2020 Check your temperatures. The new 10th gen Intel SKUs get toasty and into frequency throttling quite often. 1 Link to comment Share on other sites More sharing options...
Cristiano Sadun Posted December 14, 2020 Share Posted December 14, 2020 What BitFlipper writes above is important to understand: you have buffers from and to the interface, and the computer must be able to read/write from/to them fast enough. It might be that your ASIO buffers are too small, but unlikely with a new system. My PC is not super-powerful and I run a 32 samples buffer with 4ms of roundtrip latency with no issues. Also as BitFlipper says, there are a few cases of hardware components (or more often, their drivers which are not so well written) which generate lots of interrupts - resulting in high DPC count in Windows, slowing down everything else. Certain motherboard-installed network cards from Intel were notorious for this a few years back, especially in laptops, but in recent years this has been far less of a problem. Sometimes it's surprising, for example the Corsair keyboard driver I had was using an huge amount of CPU for something so trivial as keyboard scanning. So excluding that, first of all, your PC must be optimized for real-time processing. That means disabling anything power-management related (both in the BIOS and Windows). removing any bloatware processes and services (your taskbar should be as empty as possible, and as BitFlipper suggests you can use Technet's process explorer to find out if something is overusing CPU). There's an optimization guide from the fellas at Focusrite which is well put together (https://support.focusrite.com/hc/en-gb/articles/207355205-Optimising-your-PC-for-Audio-on-Windows-10). You want also to ensure the CPU cores are always on (it's an easy tweak in the Windows registry but you can use the free ParkControl utility for example at https://bitsum.com/parkcontrol/ , just turn it off once you've modified the settings). And of course a SSD beats a rotating hard drive every day of the week and twice on Sunday. Also, from the msg you show up it seems you have a motherboard sound card. That's likely gonna create I/O problems, so you want to go in Device Manager and disable all the related elements. Look also at the Windows Services that are running - some are not needed and just steal CPU and I/O resources at the wrong moment. Best of luck! 2 Link to comment Share on other sites More sharing options...
Steve Harder Posted December 14, 2020 Share Posted December 14, 2020 Is your PC a Dell. If so, use TaskManager, Services to disable SupportAssistantRemediation. Google it to read more. Doing that solved ALL my dropout issues. That service can cause hard long interrupts. Fwiw. 1 Link to comment Share on other sites More sharing options...
msmcleod Posted December 14, 2020 Share Posted December 14, 2020 On 12/13/2020 at 5:06 PM, Pete Laramee said: I set the changes recommended by msmcloud. It's better, but I'm still getting dropouts...even when the system is at rest w/out playback. Maybe it's not related, but I'm also getting the following error... Sample rate is 44.1 Thanks for your help! Pete Ahh - interesting... this is the audio driver for the HDMI output. This has been known to cause issues for some people. Try disabling it. 1 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 14, 2020 Author Share Posted December 14, 2020 Yes, this is a Dell. I used the task manager to disable support assistant. Also, I disabled the HDMI to my monitor. I'm trying 128 as a buffer setting. So far I've had dropout with error (1) and another with error (5). I just don't know enough nor do I trust myself to fool around with the bios or registry. Thanks, Pete Link to comment Share on other sites More sharing options...
Sergey <RATZ> Posted December 16, 2020 Share Posted December 16, 2020 On 12/13/2020 at 3:00 AM, Pete Laramee said: New computer. 10th Gen i7, 32GB ram, 1TB SSD (75% free space), and 2TB HDD (80% free space). I had the buffer at 512 for playback and was getting dropouts. I've since changed the playback buffer to the max at 1024 and I'm still getting occasional dropouts. ERROR code (1). Average song has a total of about 36 audio tracks, 6 buses, 60 or so sonitus effects and one instance each of Izotope Ozone, LP64, and Boost 11. Cakewalk by Bandlab 64 bit. I also have 8.5PE installed, but don't use it. I'm not super computer savvy. I'm keeping the song files on the hdd...should I move them to the ssd? Does my interface have anything to do with it? It's a 3rd gen focusrite 18i20. Is my computer not enough? Maybe an i9? Any ideas? I think it's not a problem in you hardware. It is something wrong with Cakewalk. I also face to the problem. But I can give you some hint. Before drop-out you have late buffer. Late buffer appears first. Then you have drop-out. We definitely need some developer-level investigation. BTW I tried with Reaper - same interface, same content - no problem.... I have also MixBus and it does not work smooth. Moreover, I have problem when imported 19 tracks, and with FX off, WiFi disabled... buffer.pdf 1 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 19, 2020 Author Share Posted December 19, 2020 (edited) Still no change for me. I was texting on my phone - no playback or anything - my computer was completely still - and I got the dropout error 1 message. Edited December 19, 2020 by Pete Laramee More Info Link to comment Share on other sites More sharing options...
micv Posted December 19, 2020 Share Posted December 19, 2020 I have a Dell and have seen similar error. In my case the whenever the Dell's audio driver wants to use the asio soundcard intended for your DAW would cause CW to drop the audio. I don't think you can disable the Dell's audio driver b/c it would disable your asio as well. What I had to do is assigned the onboard card (whatever yours might be) to the Windows audio and make sure that the asio soundcard is disable in win audio settings. 1 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 20, 2020 Author Share Posted December 20, 2020 (edited) Still getting dropouts. Today...I was about to playback a solo I finally nailed I got a blue screen. After two hours the screen was still there so I had to do a hard shut down. Is it possible it's not cakewalk or my settings? EDIT = I just want to mention this is not the first time I've had this happen while using cakewalk. Thanks for your replies. Edited December 20, 2020 by Pete Laramee More Info Link to comment Share on other sites More sharing options...
Will. Posted December 20, 2020 Share Posted December 20, 2020 (edited) 34 minutes ago, Pete Laramee said: Still getting dropouts. Today...I was about to playback a solo I finally nailed I got a blue screen. After two hours the screen was still there so I had to do a hard shut down. Is it possible it's not cakewalk or my settings? EDIT = I just want to mention this is not the first time I've had this happen while using cakewalk. Thanks for your replies. Your focusriteusb.sys failed. Download the latest focusrite drivers from their website. HERE: Latest Drivers Also check out this: Solve known PC issue with CbB Will ✌ Edited December 20, 2020 by Will_Kaydo 1 Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 20, 2020 Author Share Posted December 20, 2020 Latest focusrite drivers already in. I'm going through your other link/thread and am going through all the things I understand first. LOL So far everything is up to date. 1 Link to comment Share on other sites More sharing options...
Will. Posted December 20, 2020 Share Posted December 20, 2020 38 minutes ago, Pete Laramee said: Latest focusrite drivers already in. I'm going through your other link/thread and am going through all the things I understand first. LOL So far everything is up to date. While you at it - get the new Netframe 5.0 installed as well. It improves a few performance issues in Windows. Link to comment Share on other sites More sharing options...
Bruno de Souza Lino Posted December 21, 2020 Share Posted December 21, 2020 This issue can happen when your audio interface gets disconnected while it's being used. Windows doesn't know how to handle it and this BSOD happens. Link to comment Share on other sites More sharing options...
JL Posted December 22, 2020 Share Posted December 22, 2020 On 12/14/2020 at 1:06 AM, Pete Laramee said: I set the changes recommended by msmcloud. It's better, but I'm still getting dropouts...even when the system is at rest w/out playback. Maybe it's not related, but I'm also getting the following error... Sample rate is 44.1 Thanks for your help! Pete Do you get this everytime it drops out? This usually means an external monitor is disconnected, so probably a loose hdmi cable or something. I get this whenever I switch my monitors screens to duplicate/extend and back. Link to comment Share on other sites More sharing options...
Pete Laramee Posted December 22, 2020 Author Share Posted December 22, 2020 Not every time. Hasn't happened since I disabled hdmi sound output. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now