Larry Shelby Posted October 19, 2020 Share Posted October 19, 2020 (edited) Run the BLA to update! Edited October 19, 2020 by cclarry 3 Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 19, 2020 Author Share Posted October 19, 2020 Oddly, even though the update showed in BLA, it wouldn't install. I had to go to the site and download and install BLA again, then the update showed, and when I clicked update it FINALLY updated. Link to comment Share on other sites More sharing options...
Bapu Posted October 19, 2020 Share Posted October 19, 2020 Irony = BLA has an update button that won't update without a manual download of the installer 2 Link to comment Share on other sites More sharing options...
HIBI Posted October 19, 2020 Share Posted October 19, 2020 (edited) After clicking Update, it seemed stacking but it was downloading the updater in the background. I think it took tens of seconds. After that, install window appeared then automatically launched BandLab Assistant v6.1.0. and I had to log in again. Successful automatic update for the first time... wow, I'm surprised. Edited October 19, 2020 by HIBI 1 Link to comment Share on other sites More sharing options...
LAGinz Posted October 19, 2020 Share Posted October 19, 2020 Is there a new Cakewalk update with this too? Link to comment Share on other sites More sharing options...
chris.r Posted October 19, 2020 Share Posted October 19, 2020 1 minute ago, LAGinz said: Is there a new Cakewalk update with this too? I saw a sneak peek of an articulation manager for Cakewalk. Can't wait to see a new beta announced soon! Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 19, 2020 Author Share Posted October 19, 2020 8 minutes ago, LAGinz said: Is there a new Cakewalk update with this too? Not yet...just BLA Link to comment Share on other sites More sharing options...
JoeGBradford Posted October 19, 2020 Share Posted October 19, 2020 Update worked ok here Link to comment Share on other sites More sharing options...
InstrEd Posted October 19, 2020 Share Posted October 19, 2020 1 hour ago, chris.r said: I saw a sneak peek of an articulation manager for Cakewalk. Can't wait to see a new beta announced soon! Me too! Then they can work on a chord track 1 Link to comment Share on other sites More sharing options...
balinas Posted October 19, 2020 Share Posted October 19, 2020 Update through the app is stuck in circles here. Of all the updates to Bandlab over the last few years, only one has ever proceeded smoothly through the app itself. A functional chord track in Cakewalk would probably bring me back full time. But on to other updates and downloads right now! Link to comment Share on other sites More sharing options...
Brian Walton Posted October 19, 2020 Share Posted October 19, 2020 I was thinking the last Bandlab release suggested the updates to Cakewalk would no longer need that broken update system known as Bandlab Assistant. Or was that just a dream we all shared? Link to comment Share on other sites More sharing options...
LAGinz Posted October 19, 2020 Share Posted October 19, 2020 Updates had been working smoothly for me on this in 2020. Not this one. Tried updating on app. No go. Tried deleting, reinstalling new version, and appeared to work. But then wouldn’t re-open.? Glad Studio One is my main DAW these days. Link to comment Share on other sites More sharing options...
Larry Shelby Posted October 19, 2020 Author Share Posted October 19, 2020 25 minutes ago, balinas said: Update through the app is stuck in circles here. Of all the updates to Bandlab over the last few years, only one has ever proceeded smoothly through the app itself. A functional chord track in Cakewalk would probably bring me back full time. But on to other updates and downloads right now! All of mine have worked up until this one. It was the first time I had to get download the BLA Installer and reinstall before the update would work. Link to comment Share on other sites More sharing options...
balinas Posted October 19, 2020 Share Posted October 19, 2020 (edited) 44 minutes ago, cclarry said: All of mine have worked up until this one. It was the first time I had to get download the BLA Installer and reinstall before the update would work. If anyone needs it, here is the link: https://www.bandlab.com/products/desktop/assistant Frankly, I dont know if this is the most recent update or not. I downloaded and installed, then ran BLA. Immediately it says there is an update available. Hmmm..... So I click on update, and sure enough, it does update correctly this time. Sorry, but I can't give credit to BLA for a smooth update, especially when I have to reinstall BLA just to get it to pretend to update! Back to baseline, and awaiting the next piece of software to present its Gordian knot update process. Waves has been a good one for this. IKM follows in a close second at times, and NI updates are hit or miss recently. Sometimes all these updates seem like that headless chicken policy making South Park episode! Edited October 19, 2020 by balinas clarification 2 Link to comment Share on other sites More sharing options...
Promidi Posted October 19, 2020 Share Posted October 19, 2020 Can't update here either. Currently on 6.0.0.0 of BA. Says it needs an update. I click on update , Not only does BA quit, but the BA process also terminates. I tried uninstalling and reinstalling BA and downloading from https://www.bandlab.com/download/assistant/windows same result.... I chucked a reboot in there somewhere for good measure - same result. I am still stuck on BA 6.0.0.0 I have flicked a support ticket to Cakewalk support. Link to comment Share on other sites More sharing options...
jesse g Posted October 20, 2020 Share Posted October 20, 2020 4 hours ago, Promidi said: Can't update here either. Currently on 6.0.0.0 of BA. Says it needs an update. I click on update , Not only does BA quit, but the BA process also terminates. I tried uninstalling and reinstalling BA and downloading from https://www.bandlab.com/download/assistant/windows same result.... I chucked a reboot in there somewhere for good measure - same result. I am still stuck on BA 6.0.0.0 I have flicked a support ticket to Cakewalk support. Try installing the Bandlab Assistant from this Cakewalk web Page. https://www.bandlab.com/products/cakewalk Make sure you restart your computer first, then go to the webpage and download and install. 1 Link to comment Share on other sites More sharing options...
Promidi Posted October 20, 2020 Share Posted October 20, 2020 46 minutes ago, jesse g said: Try installing the Bandlab Assistant from this Cakewalk web Page. https://www.bandlab.com/products/cakewalk Make sure you restart your computer first, then go to the webpage and download and install. That's the first thing I tried.... same result. It still downloads 6.0.0.0. I installed it anyway, but the reinstalled version still asks for an update.... which fails. Link to comment Share on other sites More sharing options...
ZincT Posted October 20, 2020 Share Posted October 20, 2020 (edited) I was getting pretty much the same result as Promidi trying to do the update from within BLA. Downloading the file manually and running it eventually did do the update. After running the update it says it's on version 6.1.0. I also recall talk of getting rid of BLA and the sooner the better from my viewpoint. Edited October 20, 2020 by ZincT Link to comment Share on other sites More sharing options...
Promidi Posted October 20, 2020 Share Posted October 20, 2020 Cakewalk must have updated the installer on their website. I performed another manual download and install and this time I ended up with BA 6.1.0. Link to comment Share on other sites More sharing options...
Sander Verstraten Posted October 20, 2020 Share Posted October 20, 2020 Shouldn't BLA be redundant when the next CbB is released? It should update CbB from within the program from then on? Or will it just update BLA from CbB? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now