ZincT Posted February 22, 2019 Share Posted February 22, 2019 Download from your account https://www.ikmultimedia.com/userarea/my-products/# I went with ST4 standard so I have a 100Gb download! Link to comment Share on other sites More sharing options...
Leadfoot Posted February 22, 2019 Share Posted February 22, 2019 Have fun with that!? 1 Link to comment Share on other sites More sharing options...
abacab Posted February 22, 2019 Share Posted February 22, 2019 4 hours ago, ZincT said: I went with ST4 standard so I have a 100Gb download! Same here. But think I will wait a bit to start the downloading. Some comments over at KVR seem to indicate early issues with a few downloads. Link to comment Share on other sites More sharing options...
ZincT Posted February 22, 2019 Author Share Posted February 22, 2019 29 minutes ago, abacab said: Same here. But think I will wait a bit to start the downloading. Some comments over at KVR seem to indicate early issues with a few downloads. Yes I have been following that thread on KVR (and contributing myself). So far so good with the download and the speed keeping up OK at the moment. Got about 40Gb so far.. I have an unanswered question about the download part numbering, for example, the download list shows ST4 Acoustic Drum Kit Sample Part 1 and then Part 4. I would like to know whether that is because you only get parts 2 and 3 with the MAX version or is there something missing from my downloads? Link to comment Share on other sites More sharing options...
abacab Posted February 22, 2019 Share Posted February 22, 2019 19 minutes ago, ZincT said: Yes I have been following that thread on KVR (and contributing myself). So far so good with the download and the speed keeping up OK at the moment. Got about 40Gb so far.. I have an unanswered question about the download part numbering, for example, the download list shows ST4 Acoustic Drum Kit Sample Part 1 and then Part 4. I would like to know whether that is because you only get parts 2 and 3 with the MAX version or is there something missing from my downloads? Good to know about the download speed! But that question about missing files is the reason I am holding off. It appears that the official release date was rushed, and there may be some inevitable growing pains as a result. I think I'd rather just heave to and wait for this storm to blow over! For example, what if they pushed the wrong download files in some cases, and they may have to replace or correct some of them? The download and install is a long tedious process that I would rather not repeat. I'll probably just download the ST4 app and have a play with my existing libraries, to satisfy my curiosity for now. Link to comment Share on other sites More sharing options...
ZincT Posted February 22, 2019 Author Share Posted February 22, 2019 (edited) 1 hour ago, abacab said: Good to know about the download speed! But that question about missing files is the reason I am holding off. It appears that the official release date was rushed, and there may be some inevitable growing pains as a result. I think I'd rather just heave to and wait for this storm to blow over! For example, what if they pushed the wrong download files in some cases, and they may have to replace or correct some of them? The download and install is a long tedious process that I would rather not repeat. I'll probably just download the ST4 app and have a play with my existing libraries, to satisfy my curiosity for now. Peter has now confirmed that non-sequential part numbering is correct if you don't have the MAX version. ? I am trying to resist trying out the new interface until I have all the instruments. I do think it's a shame that they didn't have a less manual method for downloading and installing. Edited February 22, 2019 by ZincT typo Link to comment Share on other sites More sharing options...
fret_man Posted February 25, 2019 Share Posted February 25, 2019 ST4 doesn't yet show up in my product area. The order still shows "processing" (since Dec).. Link to comment Share on other sites More sharing options...
abacab Posted February 25, 2019 Share Posted February 25, 2019 2 hours ago, fret_man said: ST4 doesn't yet show up in my product area. The order still shows "processing" (since Dec).. Link to comment Share on other sites More sharing options...
abacab Posted February 25, 2019 Share Posted February 25, 2019 Scroll down to "compare versions" to see the included instrument libraries for each version listed side by side. Pre-release pricing is still good until March 5th. https://www.ikmultimedia.com/products/st4/index.php?p=versions&utm_source=forum&utm_medium=link&utm_campaign=st4 Link to comment Share on other sites More sharing options...
ZincT Posted February 27, 2019 Author Share Posted February 27, 2019 Version 4.0.2 now available in your account. I may actually try to install it now. More info here... https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=12&t=20719 Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted February 28, 2019 Share Posted February 28, 2019 We've also added sound library updates (and those should be run before the 4.0.2 update but it won't cause the zombie apocalypse if you don't do so, it is a "recommendation") including 1.2 versions today for SampleTank 4 (non-SE/MAX) users who are having trouble with some guitars not showing as properly authorized. Link to comment Share on other sites More sharing options...
gigasonar Posted March 1, 2019 Share Posted March 1, 2019 Instant Audio Dropout with Sampletank 4!!!? Everytime you try to load C7 Grand!!! It won't work both CbB or Sonar Platinum? Link to comment Share on other sites More sharing options...
InstrEd Posted March 1, 2019 Share Posted March 1, 2019 That's not good. Link to comment Share on other sites More sharing options...
gigasonar Posted March 1, 2019 Share Posted March 1, 2019 Yep, not good at all!!!? In Reaper it's much better but still crashing often! I just tried to load Parlor Acoustic Pick Full Keyswitch and Reaper said pooh and disappeared ! But still in task manager with 3.6 gb meory allocation ! Sampletank 4 seems to be crashfest? Link to comment Share on other sites More sharing options...
abacab Posted March 2, 2019 Share Posted March 2, 2019 2 hours ago, gigasonar said: Yep, not good at all!!!? In Reaper it's much better but still crashing often! I just tried to load Parlor Acoustic Pick Full Keyswitch and Reaper said pooh and disappeared ! But still in task manager with 3.6 gb meory allocation ! Sampletank 4 seems to be crashfest? What are your system specs? Link to comment Share on other sites More sharing options...
gigasonar Posted March 2, 2019 Share Posted March 2, 2019 11 hours ago, abacab said: What are your system specs? Sampletank 4.02 Standard, Intel i7 3700 and 16 Gb memory! Link to comment Share on other sites More sharing options...
gigasonar Posted March 2, 2019 Share Posted March 2, 2019 ST4 is unbelievable RAM guzzler!!!? Over 2Gb memory standalone and VSTi Kontakt 6 (player) standalone 117 Mb Independence Pro 170 Mb I thought Sampletank 3 is big on RAM with 500Mb!! Link to comment Share on other sites More sharing options...
abacab Posted March 2, 2019 Share Posted March 2, 2019 (edited) 18 hours ago, gigasonar said: Instant Audio Dropout with Sampletank 4!!!? Everytime you try to load C7 Grand!!! It won't work both CbB or Sonar Platinum? I can reproduce that audio dropout every time with the C7 Grand. If I restart the audio engine, I can play the instrument. My system specs: Window 10 with the latest Cakewalk on SSD, Intel Core i3-3.4GHz, 8GB RAM, SampleTank Max 4 on 7200 rpm internal SATA HDD. Have you opened a support ticket with IK support yet? Edited March 2, 2019 by abacab Link to comment Share on other sites More sharing options...
gigasonar Posted March 2, 2019 Share Posted March 2, 2019 25 minutes ago, abacab said: I can reproduce that audio dropout every time with the C7 Grand. If I restart the audio engine, I can play the instrument. My system specs: Window 10 with the latest Cakewalk on SSD, Intel Core i3-3.4GHz, 8GB RAM, SampleTank Max 4 on 7200 rpm internal SATA HDD. Have you opened a support ticket with IK support yet? Not support ticket yet! I should open it ! How you restart audio engine in CbB or Sonar? Can you load these big guitars, Parlor and Black LP without problems ? Link to comment Share on other sites More sharing options...
abacab Posted March 2, 2019 Share Posted March 2, 2019 10 minutes ago, gigasonar said: How you restart audio engine in CbB or Sonar? Audio Engine on/off button is show here in the Transport Module, figure 216-L. http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=ControlBar.06.html Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now