steve trusty Posted February 21, 2019 Share Posted February 21, 2019 I have a Roland td11kv Edrum Set. Roland spd sx, and a mini nova keyboard. I bought a moto midi interface. I also run a 2x2 Tascam interface. My td11kv on has a midi out option. Whereas the other two have both in and out. I use the spd sx via the midi in and out on the Tascam interface. I’d like to have all the above hooked up and ready to go but available at all time also.. I’d like to possibly use my novation as a control surface. But from everything I’ve read, the moto lite is basically plug and play.. my question is how do I route the moto “with” the Tascam interface where I can basically play any of the gear listed above without jumping through a bunch of hoops?? I run win 10, creation station from sweetwater if it matters. Thanks ahead of time! Link to comment Share on other sites More sharing options...
John Posted February 21, 2019 Share Posted February 21, 2019 You need at least three MIDI inputs if I counted your gear right. You may need to add one more. Link to comment Share on other sites More sharing options...
steve trusty Posted February 21, 2019 Author Share Posted February 21, 2019 Sorry I misspelled and said that kinda wrong. I have a MOTU Micro lite interface. It supports up to 4 midi ins and outs.. just not so sure on how to tell bandlab to recognize both interfaces simultaneously so I can bounce around from each gear Link to comment Share on other sites More sharing options...
John Vere Posted February 21, 2019 Share Posted February 21, 2019 In Preferances/Midi/ Devices you make sure all boxes are checked. Then those will show as available inputs on any midi track. 1 Link to comment Share on other sites More sharing options...
John Posted February 22, 2019 Share Posted February 22, 2019 Well I wouldn't check all MIDI ports. Just the ones you want. I don't think he would want the MS synth. ? Link to comment Share on other sites More sharing options...
steve trusty Posted February 23, 2019 Author Share Posted February 23, 2019 just wanted to say thanks guys! It was easier than I anticipated, especially since the interface was automatically recognized and listed under midi, as well as available out on all tracks. Highly recommended the MOTU 5x5 Midi for midi solutions. Built like a tank too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now