bassface Posted January 24, 2019 Share Posted January 24, 2019 hi all ..ive been going thru the posts and i know its been discussed before.. but i just cant find a download for the overlay..is there one? can some one please point me in the right direction...thanks Link to comment Share on other sites More sharing options...
msmcleod Posted January 24, 2019 Share Posted January 24, 2019 I'm not aware of anywhere you can download them, but there's a couple of places that will print/cut high quality overlays to your spec: https://store.birchwoodstudioandevents.com/Behringer_xtouch http://www.taktility.com/overlays/xtouch-compact/ Link to comment Share on other sites More sharing options...
bassface Posted January 24, 2019 Author Share Posted January 24, 2019 thanks for that...this will cost me $42.00 aus. kinda hoping for something a little cheaper like a paper template that i can print and cut out the button holes it can be blank and i would fill in the names anything like that? Link to comment Share on other sites More sharing options...
msmcleod Posted January 24, 2019 Share Posted January 24, 2019 21 minutes ago, bassface said: thanks for that...this will cost me $42.00 aus. kinda hoping for something a little cheaper like a paper template that i can print and cut out the button holes it can be blank and i would fill in the names anything like that? I don't know why I didn't think of this earlier, but the custom template you have to fill in on the taktility site, is the actual an adobe illustrator template the owner uses to print out: http://taktility.com/data/documents/X-Touch_Compact_Overlay_Template.zip You should be able to fill it in and print it out yourself (assuming you have adobe illustrator - although I believe you can install a trial version). Link to comment Share on other sites More sharing options...
bassface Posted January 24, 2019 Author Share Posted January 24, 2019 oops ..not entirely blank. i would need an outline of the buttons to cut around. Link to comment Share on other sites More sharing options...
bassface Posted January 24, 2019 Author Share Posted January 24, 2019 thanks that was sooo close..its for the COMPACT x touch.. i need the NON compact version with the jog wheel...damn! Link to comment Share on other sites More sharing options...
newdreamstudio Posted January 24, 2019 Share Posted January 24, 2019 I posted in the following thread on Nov. 30, 2016: http://forum.cakewalk.com/XTouch-alternative-to-Lexan-overlay-m3520013.aspx labeler tape (1/2", WHITE ON BLACK)... it took about 30 mins... 1 Link to comment Share on other sites More sharing options...
bassface Posted January 24, 2019 Author Share Posted January 24, 2019 thanks ..thats clever. does it leave any sticky residue when you peel it off, say when change function pads? Link to comment Share on other sites More sharing options...
newdreamstudio Posted January 24, 2019 Share Posted January 24, 2019 good question! I haven't removed them since I put them on two years ago.... Usually label tape doesn't leave any residue. FWIW, I used Brother P-touch label tape... Rusty Link to comment Share on other sites More sharing options...
Nick_M Posted January 26, 2019 Share Posted January 26, 2019 I am using magnetic printable paper and works wonders (and you can remove it at will without any residues). One example below: https://www.supermagnete.ch/eng/magnetic-sheet/magnetic-paper-glossy-printable-a4-format_MIP-A4-01 I hope it helps! Nick Link to comment Share on other sites More sharing options...
Jack Stoner Posted January 26, 2019 Share Posted January 26, 2019 I have a graphic file of the overlay. PM me with your e-mail and I will send it to you. I printed it out on "card" stock and then laminated it. Its stuck down on my X-Touch with double sided tape at spots. Not the neatest way to do it but it works. Link to comment Share on other sites More sharing options...
Fwrend Posted January 26, 2019 Share Posted January 26, 2019 I can't remember where I got this one (2016) and I haven't used it yet but perhaps it can help. https://1drv.ms/b/s!Aqmdxt0-uEjh1XlsvTPQFNGEE4YM Link to comment Share on other sites More sharing options...
Jack Stoner Posted January 26, 2019 Share Posted January 26, 2019 9 hours ago, Fwrend said: I can't remember where I got this one (2016) and I haven't used it yet but perhaps it can help. https://1drv.ms/b/s!Aqmdxt0-uEjh1XlsvTPQFNGEE4YM That is the same as the one I have, except mine has the Black/White reversed. e.g Black with white lettering. Link to comment Share on other sites More sharing options...
Steev Posted January 27, 2019 Share Posted January 27, 2019 Here is a printable overlay attached Link to comment Share on other sites More sharing options...
Steev Posted January 27, 2019 Share Posted January 27, 2019 And this will be mt last post to this forum. Goodbye Link to comment Share on other sites More sharing options...
bassface Posted January 28, 2019 Author Share Posted January 28, 2019 (edited) Wow!thanks everybody i just got back from big weekend of gigs (its Australia Day where i live) so havent been able to check the forum. but anyway all good stuff. Hey steev is that image you posted supposed to be a little bit blurry? Jack Stoner you have mail. Again thanks everybody Oh PS im assuming at least some you own an x touch if so can you confirm/ deny that the motorised faders are noisy. some are saying that they make a noise (when moving) like an old dot matrix printer ., thanks Edited January 28, 2019 by bassface addition Link to comment Share on other sites More sharing options...
Jack Stoner Posted January 28, 2019 Share Posted January 28, 2019 The motorized faders on my X-Touch are "dead" quiet. Not noisy like they were on a BCF 2000 that I had. (e-mail sent with overlay). Jack Link to comment Share on other sites More sharing options...
bassface Posted January 28, 2019 Author Share Posted January 28, 2019 thats good to hear..and thanks for the overlay Link to comment Share on other sites More sharing options...
Lawrie Anness Posted June 17, 2020 Share Posted June 17, 2020 (edited) On 1/26/2019 at 11:44 AM, Jack Stoner said: Edited June 17, 2020 by Lawrie Anness Error Link to comment Share on other sites More sharing options...
Lawrie Anness Posted June 17, 2020 Share Posted June 17, 2020 (edited) Hi Jack, Just purchased an x-touch and would be really grateful for a copy of your graphic file for Cakewalk Edited June 17, 2020 by Lawrie Anness spelling! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now