Joe Dun

I am the OP. Thanks to all who replied. I guess at some point, as I was ready to give up again, the need to use Cakewalk had passed, along with my motivation. And other things were drawing my spare time. I recall starting to use AutoCAD in the late 80's. It came with a 6" stack of printed manuals. They had a small amount of tutorials, but really were reference manuals. And I did actually go through every page, even if I just skimmed them. As Byron Dickens pointed out, you can look things up in a reference manual much faster than you can check for an answer in a video. And even if the printed book is a tutorial, it is easy to skip over pages that cover things you already know. I will also add, that the quality of software manuals rapidly declined as built-in, or on-line manuals took over. I realize that people don't buy software based on the manual, so it tends to get less attention. The advent of good voice to text transcripts on Youtube videos may have changed some of the issues with using videos as your manual. They are now searchable, and you can jump to just the part of the video you are most interested in.

I purchased Cakewalk over 30 years ago, when it was $100, thinking I was buying something reasonably easy to use. And over the years, I would start up trying to use it, and spend many hours on it. Try to use the help file, but would not get a sufficient explanation, and sometimes dead links in the on-line help, before giving up. Then, eventually I would try again, only to have the same sort of issues, and eventually get frustrated after trying for a few hours to do something as basic as trying to create an eighth note on the piano score view. I think I have the settings correct to permit this , and but it will only insert a quarter note. I try to edit that note, and cut its duration in half, but it still shows as a quarter note, even if it plays as an eighth. Is there really any hope of using the program if I am primarily using it with the staff view? Are there any other programs that are easier to use for this? -Joe

I purchased Cakewalk, perhaps two decades ago, but never could get to the point where I could use it much. I would lay it aside, and then in a few years would try again, only to get stuck again. The help file just wasn't very helpful. I had big hopes when Bandlab took it over, and had hoped they would rewrite the manual. But, it is the same as before. Is there perhaps a 3rd party book that I could purchase? My search only turned up "The Power in Cakewalk SONAR" by William Edstrom Jr. Which doesn't seem to be the same edition of Cakewalk. Any other suggestions? -Joe

I am the original poster. In retrospect, I should have named the thread "Make Cakewalk a cakewalk"... and that primarily means that a new user of the software, and even new to MID should be able to get started and have a path to master the program with the resources provided. That resource should primarily be the user manual. I realize that many of the replies are not directed at myself, but just general statements about software users. I will restate that I am a highly experienced computer user, who cut his teeth on CPM, then in DOS, and even did a bit of machine-language programming. I have invested the hours to try to learn Cakewalk. Though, I will concede that I should give the BandLabs version a fresh start from the beginning. However, the recent example where I was unable to figure out how to reorder tracks, somewhat discouraged me on that effort. It indicated to me that the documentation is still not where it needs to be, since the documentation described actions that didn't work. Hopefully that was just a fluke, and the forum proved to be a great resource to eventually figure it out. I am willing to give Cakewalk another try. Cakewalk, to live up to its name sake, should be something a complete beginner should be able to do basic operations without having to resort to asking for a proper explanation on a forum. -Joe

It was many years ago that I really spent many hours of intensive effort going through the tutorials and help file, trying to learn Cakewalk. It was quite frustrating, and just was not working out. And I am used to working with very complex software, such as AutoCAD and SolidWorks. Sadly, virtually all software has suffered from the decline that occurred after computers became commonplace and low cost. Before then, software and hardware vendors made no assumptions about prior knowledge about the subject, and so realized that documentation was key to making their product useful. But, as computers became commonplace, software vendors realized that the price of the software was more important than the user manual, and so skimped on the user manual. And the Internet only made matters worse, because people could go to 3rd parties for support and training. The internet is a great resource (as this forum shows), but it is not an organized training and reference manual. To be fair to Bandlab, I have not really investigated their own recent training materials in any depth. I saw that a lot was copied from early versions of Cakewalk, and simply assumed that it was at the same level as before. But, that assumption may not be correct. I realize that I need to give Bandlab a chance to prove themselves, and need to invest more hours by starting from the beginning with them and go over the stuff I though I may have figured out in the past, because I may be missing some parts of that training. -Joe

Here are more details. The music is all just MIDI tracks, there are no audio tracks. The only other type of track is the TTS-1. Its gain is in the middle of the range. The MID tracks all had volume set around 100. When I examine the MP3 using Audacity audio editor, the waveform is pretty low. I used Audacity to increase the volume some, but I know that increasing volume from a very low level, to a much higher one will tend to create problems with the quality of the audio. Plus, of course, it is an extra step I would rather not have to think about. slartabartfast ask about my volume at the mains. I am not sure where to see this in Cakewalk. -Joe

it seems that I am a little out of date. One current alternative is TeamViewer, and another is that the Google Chrome browser has this built in. But, I not recommending these for use when you are seeking support from a stranger. To me the risks of giving a stranger complete support of your system is too great. I've done a little asking around to see if I could find someone I knew who used Cakewalk, but was unsuccessful. Perhaps BandLab could offer a place for people to list their availability to offer paid support. Perhaps that would facilitate the ability to find someone, who you could meet in person for support. However, unless it were pushed heavily by BandLab, I doubt enough would register to make it likely that you could find someone local. -Joe

Today I had a thought about a new support option. It is common for computer support folks to do their work remotely via something like Netmeeting. It works quite well, and permits an expert to solve a problem very quickly. The main drawback is that it permits the remote support guy to have total control over the computer of the person being helped. So, a high level of trust is needed. I wonder if some sort of limited "share my Cakewalk App" thing that could be created, and would permit an expert to see and change just the Cakewalk program, but not full access to the operating system. It may not be something that BandLab would offer directly. But, if there were some sort of mode that would permit a user to get remote help, that would facilitate a much easier way to troubleshoot. The troubleshooter might be a volunteer, or paid support situation. And perhaps the remote support process doesn't involve BandLab at all, other than building this remote-support option into the software. -Joe

I have asked some, who do use keyboards, about some help or advice with Cakewalk, but they don't use Cakewalk. I am guessing that the name does not attract more advanced users, and they go to other software considered more professional. I am glad the drag-to-reorder discuss was started, because that is the type of thing that no amount of time in the user manual, or tutorials will teach you. And initially, even with the extra help, my conclusion was that the feature is simply not working properly on my computer. It took quite a lot of effort on both myself, and others, to finally drill down to the root cause. I.e. the active area is not normally available until you expand the tracks. Once a person runs into a few of these types of issues, you tend to want to give up. This is my history with Cakewalk. I try to start afresh, and put some hours into it, then run into too many barriers that I can't get past. It is also likely that as a semi-experienced user, I would tent to gloss over the beignner tutorials, because I felt I had already learned those things. But, because these periods of time are so spread out, I forget some of the things. The Midi 0 vs 1 is something I used to know, but had forgotten about until it was mentioned here. So, I am in many ways a novice. -Joe

Since I don't normally expand the track view, the drag area is non-existent. Personally, I would have set the track number itself as the area to drag. And since the smaller track size is default, the user manuals should state that the track must be made larger than default, to be able to drag it. I sort of wonder if the drag area is actually was advertisement programmed to what it is now. I.e. a bug. -Joe

Thanks for the PDF link. I think that will be much better to use than the web based one. Robert Bone, concerning draging tracks. When I expanded the height of the track to be taller than the default, and then place my cursor directly under the track number, that gives me the double-arrow, and I can successfully change the order of the tracks. Though, the target area is pretty small to get that double-arrow. -joe

Thank you for the detailed response. It helped me realize there is a bug or incompatibility with my video drivers. In my case, the double-arrow will never appear. If I click and drag the track icon (the MIDI connector icon for the MIDI tracks) I can successfully drag the tracks to new locations. It is a bit of a challenge, as the orange line will sometimes appear to where I am dragging, and sometimes not. And if the orange line does not appear, whether the track will go to the new location is about 75% successful. Though, dragging the first track is the one that seems to have trouble most of the time. And while my posting about the problems reordering tracks was not the purpose of the thread, it was cited an example of my problems. I viewed the help file, and it didn't work. I simply blamed the help file for not being detailed or accurate enough. My online effort didn't work either, because I was unsure which of the sources was authoritative for the current Cakewalk version. If it didn't work as described, I assumed the version was different. Searching on the online Cakewalk user manual will give me results for Cakewalk, Music Creator, and Sonar in various versions. There doesn't seem to be a way to restrict your choices to just the current Cakewalk. And to add to the confusion, Music Creator, if I recall correctly, was supposed to be the new name for Cakewalk, and I assumed there was a process of name changes that were associated with updates to the software. Hopefully some of the user manual issues have been improved. But you cannot search the online help file and just get responses about Cakewalk. That is a major problem.

I also use AutoCAD type software with a similar number of years behind it. I see how it would be very difficult for a beginner. Regarding the user manual. I know some are tempted to just jump onto a forum and post a basic question. But, in my case, I normally spend a fair amount of time looking things up, and next i try other existing answers in an internet search. Finally, I come to the forum and post. The two main difficulties I recently ran into, were not addressed in the user manual. E.g. the task of changing the order of the tracks has some sort of bug on my system, so the instructions don't work. And initially, before asking on the forum, I just assumed I was not viewing the correct user manual, or that the explanation there just was wrong, since it is not unusual for me to read something in the manual, and it not work . Though, in most cases, I suspect there is some setting elsewhere that is creating the problem. Another issue, is that it often refers to a place to click or menu item to find, and I cannot find it. This is sometimes because they use words to describe something that is visual. But, it is time for me to start over again with the tutorials, since it is has been so long since I did this. -Joe

It is great to hear that you are monitoring this thread, and I see that you had already realized this issue, and started to find a solution.

What is CbD? Looking up 3 letter abbreviations on the internet is a useless task. -joe