Massica Posted September 3, 2019 Share Posted September 3, 2019 大家好，我更新了新的win10系统，并安装了最新版本的Cakewalk of Bandlab，感觉很不错。 但一周后奇怪的事情发生了： 每当我开启计算机，双击Cakewalk of Bandlab，准备开始我的混音工作时。却发现它一直卡在初始界面（如下图），无论如何都无法进入程序。 我必须要重新打开三到四次才可以进入程序，有时甚至要重启计算机！ 这问题快逼疯我了，各位如果知道问题出在哪里，请一定要帮帮我，谢谢大家！ Link to comment Share on other sites More sharing options...
1 Jim Fogle Posted September 4, 2019 Share Posted September 4, 2019 (edited) @Massica Greetings, welcome to Cakewalk by Bandlab and welcome to the forum. One possibility is you may have VST scanning enabled during start up and the program is having trouble while scanning. Press "P" to open the Preferences window and select File > VST Settings > Manual Scan. Does that make a difference? Another possibility is the installation may be corrupt. Use the Windows Control Panel Add/Remove Programs function to remove the program and Bandlab Assistant. Then download a fresh copy of Bandlab Assistant and let it install a fresh copy of the program. Edited September 4, 2019 by Jim Fogle Link to comment Share on other sites More sharing options...
0 Massica Posted September 3, 2019 Author Share Posted September 3, 2019 Hello, everyone. I updated the new win10 system and installed the latest version of Cakewalk of Bandlab. It feels good. But a week later something strange happened: Whenever I turn on the computer, double-click Cakewalk of Bandlab to start my mixing. It was found that it had been stuck in the initial interface (as shown below) and could not enter the program in any case. I have to reopen three or four times before I can enter the program, sometimes even restart the computer! This problem is driving me crazy. If you know what the problem is, please help me. Thank you! Link to comment Share on other sites More sharing options...
0 Massica Posted September 10, 2019 Author Share Posted September 10, 2019 Thank the friend above. But in fact, I tried both methods. They didn't work at all. This should be a deeper problem between Cakewalk and Win10 Link to comment Share on other sites More sharing options...
0 chuckebaby Posted September 10, 2019 Share Posted September 10, 2019 Try to open the project in safe mode. Note: Safe mode is activated when you open a file while the SHIFT key is pressed. If there is no projects to open and you are starting cakewalk for the first time and this is happening.. Make sure your Windows is up to date with all updates. Link to comment Share on other sites More sharing options...
0 yeyu Posted January 19, 2021 Share Posted January 19, 2021 Are you using ASIO4ALL but not an audio interface? I met this question too. I changed audio driving from ASIO4ALL to WASAPI, and now my cakewalk are working well! You can try it! Link to comment Share on other sites More sharing options...
0 BozX Xyca Posted May 22, 2021 Share Posted May 22, 2021 Sorry my english is not very good, hope my answer can help you： If you have ever installed and used Foobar2000,you can check your regedit:[HKEY_LOCAL_MACHINE\SOFTWARE\ASIO\DSDTranscoder] DSDTranscoder is not compatible with Cakewalk and it doesn't have much effect on Cakewalk.DSD's sound quality is too bad. Delete DSDTranscoder in the regedit, Cakewalk start normally. —————————— 由於本帖在中文互聯網中易於被檢索到，所以貼一遍中文： 如果你曾經使用過Foobar2000，那請檢索一下註冊表： [HKEY_LOCAL_MACHINE\SOFTWARE\ASIO\DSDTranscoder] DSDTranscoder和Cakewalk互不兼容，而且二者事實上毫不影響。DSDTranscoder的音質也不好。 在註冊表中刪除DSDTranscoder即可正常啟動Cakewalk。 —————————— Special Thanks：http://audiobar.cn/forum.php?mod=viewthread&tid=550543 @佛西辞 Link to comment Share on other sites More sharing options...
Question
Massica
大家好，我更新了新的win10系统，并安装了最新版本的Cakewalk of Bandlab，感觉很不错。
但一周后奇怪的事情发生了：
每当我开启计算机，双击Cakewalk of Bandlab，准备开始我的混音工作时。却发现它一直卡在初始界面（如下图），无论如何都无法进入程序。
我必须要重新打开三到四次才可以进入程序，有时甚至要重启计算机！
这问题快逼疯我了，各位如果知道问题出在哪里，请一定要帮帮我，谢谢大家！
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now