Noel Borthwick Posted September 6, 2021 Share Posted September 6, 2021 12 minutes ago, Osman Hemidov said: Hello everybody. When exporting to mp3, can you make it so that an additional window with mp3 settings does not open, but that the settings are present in the main export window? Sorry for google translation. @Osman Hemidov not easily because the export supports multiple encoders and each has their own specific settings. Also often sometimes its required to export multiple tracks with different MP3 formats or metadata. 1 Link to comment Share on other sites More sharing options...
Xoo Posted September 6, 2021 Share Posted September 6, 2021 39 minutes ago, chimkin2 said: You can easily apply clip gain to a single clip. Place the mouse pointer over the clip - Hold down the Ctrl Key and click and drag vertically with the left mouse button pressed. ☺️ Cursor needs to be in bottom half of clip or it starts to drag-copy - this always gets me and I swear at the computer until I remember! Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 6, 2021 Share Posted September 6, 2021 5 hours ago, Olaf said: Issues that I've encountered since updating to 09: * Sometimes synth tracks drop out, on export; * Sometimes synths are out of alignment with the audio, on export; Thanks for putting your thoughts down. This thread is exclusively to discuss issues specific to the 09 release. Most of your points do not apply here so please make different threads for them. Also when reporting issues it’s much better if they are put one per post otherwise it makes it difficult for us to follow and respond to. There was an issue with notes dropping out that was fixed in the build posted on Friday. Please make sure that you are testing with the latest build I posted which is build 114. (Linked in the first post of this thread) If you are still seeing a problem in build 114, please specify exactly what steps you take to select the data to export and what plugins are present, etc. Also providing a test project will help. Bugs are fixed quite rapidly if we can reproduce them. 5 hours ago, Olaf said: About the buffer: we're not engineers, and shouldn't start engineering our own exports, I think Cakewalk should automatically choose the fastest buffer size based on the available resources, and we have to trust that it does a great job. When I choose a compressor, I don't have to manually adjust the THD, the compression curve, the noise levels and such, I just know that the compressor has all of those dialed to where it sounds good, and that's why I choose it. How would somebody change their buffer size? What do I check, and what calculations do I need to make, to make sure it's the fastest that works without dropouts, and such? And what is that about the buffer size changing the sound of the track? That shouldn't happen in any circumstance, and I shouldn't need to change the buffer size according to "how I want the track to sound", should I? I have plugins for that. Export buffer size is no different from your playback buffer size except that it allows changing it without requiring the user to change the audio interface buffer each time. Also it allows values much higher than most audio interfaces will allow. Changing buffer sizes (often referred to as latency) is something that every DAW user has learned to do. I’ve explained this many times in this same thread but there is no one size fits all setting that is universally best for everyone so its an advanced option that can be changed. The universal option is already the default which is to follow the same size as the audio latency. There is no math required to change buffer size. The advantage with large export buffer sizes is that it uses less CPU and can make your exports run faster. However exactly like audio latency there can be downsides in rare cases if you have plugins that are not coded properly to deal with large buffers so its up to the user to check. Also when using large buffers with plugin parameter automation many plugins only process changes at buffer boundaries so you can get aliasing in these cases. The export buffer size has been available for about 15 years but was only available to change globally as an ini variable called BounceBufferSizeMs that most users didn’t know about so we expose it to make it more convenient to use since it has significant benefits in many cases. If you are getting crashes the report must include a minidump file. 2 Link to comment Share on other sites More sharing options...
Mark Morgon-Shaw Posted September 6, 2021 Share Posted September 6, 2021 19 minutes ago, Kevin Perry said: Cursor needs to be in bottom half of clip or it starts to drag-copy - this always gets me and I swear at the computer until I remember! I think you can click anywhere except clip header ☺️ ( not sure how it works if not using headers - maybe that is what you mean ?? ) Link to comment Share on other sites More sharing options...
Xoo Posted September 6, 2021 Share Posted September 6, 2021 Ah - headers. There's a few extra pixels below the actual header that also turns the cursor into the copy one - I keep hitting that (which is why I aim for the lower half) 🙂 Link to comment Share on other sites More sharing options...
Mark Morgon-Shaw Posted September 6, 2021 Share Posted September 6, 2021 2 minutes ago, Kevin Perry said: Ah - headers. There's a few extra pixels below the actual header that also turns the cursor into the copy one - I keep hitting that (which is why I aim for the lower half) 🙂 Yes you are right - It's not very precise is it 👀 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 6, 2021 Share Posted September 6, 2021 Yes all bounce operations including bounce to clip will use the same buffer setting since it is global. This week we are adding the buffer size choice to the bounce dialog as well so it can be changed from there as well. 2 1 Link to comment Share on other sites More sharing options...
Andres Medina Posted September 6, 2021 Share Posted September 6, 2021 (edited) The new darkened windows are great! Minor thing: in the Choose Articulation window, when I double click on an articulation, it doesn't apply, as it did before this update. You have to click Ok. EDIT: I think there is a major problem here: The articulation pane is not working at all... ugh! To reproduce: Insert an articulation on the Art. Pane (usually this one is applied ok) Double click the articulation and select another one (the new art. is not applied and the Art. Pane is no longer working from this point on - will not record any new articulations) Edited September 6, 2021 by Andres Medina Link to comment Share on other sites More sharing options...
Andres Medina Posted September 6, 2021 Share Posted September 6, 2021 Yes, confirmed. The articulation pane is not working. I reverted to 2021.06 build 58 and it works fine there. Link to comment Share on other sites More sharing options...
Will. Posted September 6, 2021 Share Posted September 6, 2021 4 hours ago, Andres Medina said: The new darkened windows are great! Where's this? Build 114? Link to comment Share on other sites More sharing options...
Andres Medina Posted September 6, 2021 Share Posted September 6, 2021 18 minutes ago, Will_Kaydo said: Where's this? Build 114? Yep - Similar to the new Export/Bounce windows. Try inserting articulations on the art. pane. Link to comment Share on other sites More sharing options...
Terry Kelley Posted September 6, 2021 Share Posted September 6, 2021 (edited) I'm not clear on the purpose of doing this. It looks like an oversight rather than a feature. Edited September 6, 2021 by Terry Kelley 1 Link to comment Share on other sites More sharing options...
Keni Posted September 6, 2021 Share Posted September 6, 2021 4 hours ago, Milton Sica said: I liked it too, but in some situations the background letter not being white makes it difficult. I agree with you. I like the look, but the lack of readability ruins it. If the highlight goes dark, the text has to turn bright (only when highlighted)... 3 Link to comment Share on other sites More sharing options...
Will. Posted September 6, 2021 Share Posted September 6, 2021 4 hours ago, Milton Sica said: I liked it too, but in some situations the background letter not being white makes it difficult. The dark menu with the white writing was perfect. Just not that dark menu going into white that was on the Audio FX side. That sudden burst of brightness was too much on the eyes. Link to comment Share on other sites More sharing options...
User 905133 Posted September 7, 2021 Share Posted September 7, 2021 Just a guess: blacking out the selected item is supposed to have white/light lettering. I cannot think of a reason why it should be blacked out. Link to comment Share on other sites More sharing options...
Keni Posted September 7, 2021 Share Posted September 7, 2021 1 hour ago, User 905133 said: Just a guess: blacking out the selected item is supposed to have white/light lettering. I cannot think of a reason why it should be blacked out. Possibly same as the reason the color of highlighted text in the export|filename box. There I can see the text but not the highlighting. Maybe some other change accidentally affected these. ...and the white background boxes when updating tasks to current settings? I like the readability, but why must they open mid screen instead of centered over the export dialog as the earlier dialog did? Link to comment Share on other sites More sharing options...
scook Posted September 7, 2021 Share Posted September 7, 2021 The plug-in menu highlight is a regression error. It should look like it does in 2021.06. Expect this to get addressed before the final release. 2 3 Link to comment Share on other sites More sharing options...
Olaf Posted September 7, 2021 Share Posted September 7, 2021 15 hours ago, chimkin2 said: You can easily apply clip gain to a single clip. Place the mouse pointer over the clip - Hold down the Ctrl Key and click and drag vertically with the left mouse button pressed. ☺️ Thanks! I'll remember. Link to comment Share on other sites More sharing options...
Terry Kelley Posted September 7, 2021 Share Posted September 7, 2021 Nothing worse than a regression error. 1 Link to comment Share on other sites More sharing options...
pwal³ Posted September 7, 2021 Share Posted September 7, 2021 7 hours ago, Terry Kelley said: Nothing worse than a regression error. other than a new error Link to comment Share on other sites More sharing options...
Recommended Posts