Jump to content

Recommended Posts

4 hours ago, Milton Sica said:

To me is equal.

 

I just had an incident with my interface.

The application simply silences everything.

I closed the project and opened it. There was silence.
I closed the Daw and opened it. There was silence.
I ran the project and disconnected the USB cable from the interface.
Daw didn't recognize it.
I reconnected the cable, answered the question with No, and the sound returned.

My interface has it's own power cord. So occasionally something can go haywire with the interface and I have to shut down the computer and reboot the interface then start the computer. 

If you have a powered interface that may have also fixed it. Yet unplugging and replugging your USB cable is another way of reinitializing it. I'm pretty sure when you plug it back in it makes Win 10 find the driver again or reinstall it.

I have  MOTU AVB interface and tech support told me that sometimes there may be a fluctuation in electricity, so it's good to even reboot the interface maybe once a month. I'm glad you mentioned this, because this is also a possible cause of my pops and glitches. I'll reboot my MOTU.

  • Like 1

Share this post


Link to post
Share on other sites

Here's definitely something wrong with either the new Windows Updates or Cakewalk. Plugins seems to cutout now. As soon as you delete and re-instert. It works again. Same goes for when you keep it on Save the project and reopen it. 

Also with this VST 2 32bit issue I had. 

I'm trying to replicate this, cause I ran into this like 5mins ago.

Should I send a dump file? 

Share this post


Link to post
Share on other sites
17 minutes ago, Will_Kaydo said:

Here's definitely something wrong with either the new Windows Updates or Cakewalk. Plugins seems to cutout now. As soon as you delete and re-instert. It works again. Same goes for when you keep it on Save the project and reopen it. 

Also with this VST 2 32bit issue I had. 

I'm trying to replicate this, cause I ran into this like 5mins ago.

Should I send a dump file? 

Are you sure it's not a plugin that has decided to deauthorise itself ? 

XLN Audio (e.g. Addictive Drums) does this regularly on Windows updates - once re-authorized, it's fine.

Share this post


Link to post
Share on other sites
7 minutes ago, msmcleod said:

Are you sure it's not a plugin that has decided to deauthorise itself ? 

XLN Audio (e.g. Addictive Drums) does this regularly on Windows updates - once re-authorized, it's fine.

No. Believe it or not, this is all Sonitus delay (for stereo width) and the Channel Tool  plugin with the free Boz width plugin using the TTS-1 to create drum stems. 

Share this post


Link to post
Share on other sites

After the update, CW rescans all Waves plugins on almost every single start. Need to wait for a couple of minutes on every open, otherwise the projects load with plugins missing.

Share this post


Link to post
Share on other sites
14 minutes ago, Olaf said:

After the update, CW rescans all Waves plugins on almost every single start. Need to wait for a couple of minutes on every open, otherwise the projects load with plugins missing.

Sounds like your scan options have been reset somehow.  After the scan has completed, try setting them to this:

image.png.31dd7169bade72f9214505bf63fb995c.png
 

Share this post


Link to post
Share on other sites
On 11/6/2020 at 6:01 PM, jono grant said:

 

 

 

 

 

 

 

On 7/20/2021 at 10:19 AM, Noel Borthwick said:

Its not clear if you are asking about BandLab issues or CbB. We can't assist with problems related to the BandLab Mix editor since there is a different team managing that. Contact support to report issues with BandLab. Also there is no interaction between the bandlab software and Cbb so one cannot affect the other.

Thanks for the response Noel. It's not clear to me either, way too many issues & problems happening all at once, and way over my head.

 But everything was running fine until I tried the new import/ export features and BLAM 💥

I guess I shall just have to skip & wait through a few months of all these new and improved future releases.

Or I'll have to try uninstalling and reinstalling CbB when I get the time.

Until then SONAR Platinum still runs and is still rock'in steady.💯👍 

Share this post


Link to post
Share on other sites
14 hours ago, msmcleod said:

Are you sure it's not a plugin that has decided to deauthorise itself ? 

XLN Audio (e.g. Addictive Drums) does this regularly on Windows updates - once re-authorized, it's fine.

I didn't have any issues with 3rd party plugins, but have serious issues with ProChannel and had to re authorize add on plugin modules I purchased years ago from the Cakewalk SPLAT store.

After doing so ProChannel became unstable and on some channels, but not all, the audio signal would pass thru all modules, but wouldn't pass thru and reach the buss until I SHUT OFF ProChannel. 🤬

But after shutting it off, I could still assign either Waves Sheps Omni Channel or Eventide UltraChannel and stack any other VST plugin to the FX bin. However the only Cakewalk FX I can use from ProChannel in the FX bin is the CA/2A Leveling Amp and NOTHING else will run as a stand alone VST.

Don't get me wrong I REALLY appreciate the free support and all the added features & stuff, but I happy paid a few hundred dollars for the add on ProChannel FX modules which became essential GO TO tools for 90% of my DAW projects..

 

Share this post


Link to post
Share on other sites
Posted (edited)

I think we can completely remove Split instrument track. It's even more broken now. 😅

The inserts are correct, but now the user can't choose how many they want as it gives the Maximum split tracks on "All Mono" and "All Stereo" 

For me the best inserts are still the Manual way. Insert the instrument track and add 2 or 3 Audio tracks myself if I only want to add a Kick, Snare and Hihat from the drum plugin or any plugins supporting track outputs.

This update is still a great improvement.

Edited by Will_Kaydo

Share this post


Link to post
Share on other sites
33 minutes ago, Will_Kaydo said:

I think we can completely remove Split instrument track. It's even more broken now. 😅

The inserts are correct, but now the user can't choose how many they want as it gives the Maximum split tracks on "All Mono" and "All Stereo" 

For me the best inserts are still the Manual way. Insert the instrument track and add 2 or 3 Audio tracks myself if I only want to add a Kick, Snare and Hihat from the drum plugin or any plugins supporting track outputs.

This update is still a great improvement.

It's now consistent with the Insert Soft Synth dialog - i.e. "All Mono" / "All Stereo " means all, and the number of outputs is disabled. 

Using split instrument tracks is more of an advanced way of using soft synths in any case (as opposed to simple or per output instrument tracks), so its likely you'll need to adjust things manually anyway.  Of course you can always choose "All" then delete the tracks you don't want.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Steev said:

I didn't have any issues with 3rd party plugins, but have serious issues with ProChannel and had to re authorize add on plugin modules I purchased years ago from the Cakewalk SPLAT store.

After doing so ProChannel became unstable and on some channels, but not all, the audio signal would pass thru all modules, but wouldn't pass thru and reach the buss until I SHUT OFF ProChannel. 🤬

But after shutting it off, I could still assign either Waves Sheps Omni Channel or Eventide UltraChannel and stack any other VST plugin to the FX bin. However the only Cakewalk FX I can use from ProChannel in the FX bin is the CA/2A Leveling Amp and NOTHING else will run as a stand alone VST.

Don't get me wrong I REALLY appreciate the free support and all the added features & stuff, but I happy paid a few hundred dollars for the add on ProChannel FX modules which became essential GO TO tools for 90% of my DAW projects..

 

I'm not sure why this should be happening, maybe @Jonathan Sasor can shed some light on it...

The only thing that springs to mind is that you've compressed you're drive?  This is known to cause issues with ProChannel modules.

If this is the case, decompress the following folder:

C:\Program Files\Cakewalk\Shared Utilities\Internal

Share this post


Link to post
Share on other sites
1 hour ago, msmcleod said:

Using split instrument tracks is more of an advanced way of using soft synths in any case (as opposed to simple or per output instrument tracks), so its likely you'll need to adjust things manually anyway.  Of course you can always choose "All" then delete the tracks you don't want.

I guess you're right.

I just don't see the point in choosing "All" and delete the once i don't want. The point of that feature was to insert the amount of tracks the user want, but it never gotten the attention it deserved.

I'll go old school. Not a big deal. 

Share this post


Link to post
Share on other sites
1 hour ago, msmcleod said:

I'm not sure why this should be happening, maybe @Jonathan Sasor can shed some light on it...

The only thing that springs to mind is that you've compressed you're drive?  This is known to cause issues with ProChannel modules.

If this is the case, decompress the following folder:
 


C:\Program Files\Cakewalk\Shared Utilities\Internal

 

Isn't this because the Splat modules overwritten the module's of CbB? They're the same, but different dll's. 

Share this post


Link to post
Share on other sites
2 hours ago, Steev said:

I didn't have any issues with 3rd party plugins, but have serious issues with ProChannel and had to re authorize add on plugin modules I purchased years ago from the Cakewalk SPLAT store.

After doing so ProChannel became unstable and on some channels, but not all, the audio signal would pass thru all modules, but wouldn't pass thru and reach the buss until I SHUT OFF ProChannel. 🤬

But after shutting it off, I could still assign either Waves Sheps Omni Channel or Eventide UltraChannel and stack any other VST plugin to the FX bin. However the only Cakewalk FX I can use from ProChannel in the FX bin is the CA/2A Leveling Amp and NOTHING else will run as a stand alone VST.

Don't get me wrong I REALLY appreciate the free support and all the added features & stuff, but I happy paid a few hundred dollars for the add on ProChannel FX modules which became essential GO TO tools for 90% of my DAW projects..

 

Did you update windows recently? 

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, msmcleod said:

I'm not sure why this should be happening, maybe @Jonathan Sasor can shed some light on it...

The only thing that springs to mind is that you've compressed you're drive?  This is known to cause issues with ProChannel modules.

If this is the case, decompress the following folder:
 


C:\Program Files\Cakewalk\Shared Utilities\Internal

 

No I never compress any drives or even delete duplicate files, I just add another drive when they get to 75% capacity.

I have never had any issues with CbB until updating to 2120.06 and giving the new import/export integration with Bandlab.com feature a try. I had little to NO ISSUES with any and all releases up to including CbB 2120.04.

And if there is any way to roll back or even do a clean install of 2120.04 Please let me know! 🙏🏼

Until then, and or when I read about a good stable release of CbB, I'll be perfectly happily working away in either SONAR Platinum on my Windows Computer, and not as happy & begrudgingly using Pro Tools 12 on my Mac. 

Edited by Steev

Share this post


Link to post
Share on other sites
1 minute ago, Will_Kaydo said:

Did you update windows recently? 

Yes Windows is up to date, and I religiously do weekly maintenance scans and tasks every Saturday morning.

Share this post


Link to post
Share on other sites
On 7/20/2021 at 11:35 PM, Noel Borthwick said:

The rollback installer is listed in the first para of the release notes.

Well that solved ALL  of my CbB problems! 👍😎🏆

Share this post


Link to post
Share on other sites
1 hour ago, Steev said:

Yes Windows is up to date, and I religiously do weekly maintenance scans and tasks every Saturday morning.

Yeah. I too do regularly every week. You didn't perhaps find yourself logged out of a few accounts to that computer right after the update?

I'm trying to find out whats causing my issue. Here's a hand of members that complaint about plugins that don't work. I ran twice into that problem and can't seem to point out how or whats causing it. So maybe it's a Windows update? Are you on 10 or 11? 

Share this post


Link to post
Share on other sites
22 hours ago, msmcleod said:

Sounds like your scan options have been reset somehow.  After the scan has completed, try setting them to this:

image.png.31dd7169bade72f9214505bf63fb995c.png
 

I have it on automatic background scan because I want it to update itself on VST changes, but normally it would scan the shell and if no change is found, move on. The difference is now it rescans every module.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...