Novation Launch Control

[whistlekiller]

I have an old Novation Launch Control that I use in Cakewalk by Bandlab (v 2021.01 Build 098 64 bit) for triggering Matrix samples and other things but I can't for the life of me manage to get any of the lights on the buttons to work (apart from the 'User' one you see here). I know they're OK in themselves as they cycle through red/green/yellow when I boot the PC up but they just don't work with the DAW. It's not the end of the world here but it would make things a bit easier if I could see some visual indication of what I'm doing instead of relying on the Matrix view itself. It's bound to be something obvious I've overlooked. For info, all Novation legacy firmware and Editor software is up to date.

Cheers in advance

Rich'

[Heinz Hupfer]

Hi:)

You can , depending on the function you use, automatically get the lights on when Mute or solo is pressed and you chooese those tracks. 

You can switch them on and off by programming them in AZController Software,normally as  Midi Feedback. 

http://Www.azslow.com

I do switch them by a sysex: F0 00 20 29 02 11 78 00 3c f7 for light green for example. Must be written in the programmers handbook for that controller.

https://resource.novationmusic.com/support/product-downloads?product=Launch+Control

I've written an AZController Preset for the Launch Control 2 XL which you can see here:

So I'm pretty sure I can help you with this Controller 😀

Bassman

 

Edited March 11, 2021 by Heinz Hupfer

[whistlekiller]

On 3/11/2021 at 7:28 PM, Heinz Hupfer said:

Hi:)

You can , depending on the function you use, automatically get the lights on when Mute or solo is pressed and you chooese those tracks. 

You can switch them on and off by programming them in AZController Software,normally as  Midi Feedback. 

http://Www.azslow.com

I do switch them by a sysex: F0 00 20 29 02 11 78 00 3c f7 for light green for example. Must be written in the programmers handbook for that controller.

https://resource.novationmusic.com/support/product-downloads?product=Launch+Control

I've written an AZController Preset for the Launch Control 2 XL which you can see here:

So I'm pretty sure I can help you with this Controller 😀

Bassman

 

Thanks for the response Heinz. 😀