Morten Saether 776 Posted January 22 [Updated 15-Apr-2021] The 2021.04 Early Access is now available! Hi all - please use this topic to post feedback specific to 2021.01. Release-specific feedback is valuable to us, and consolidating it in a single topic is extremely helpful. Thanks in advance! 2021.01 Release Notes 1 Share this post Link to post Share on other sites
Matthew Sorrels 1,586 Posted January 22 When trying to update to the final 2021.01 release (from the preview) the installer gave me this error: Using proc monitor I found that the WaveLocalServer.exe appears to have locked the sndfile.dll And it keeps running even after you exit Cakewalk. Perhaps they are doing a loadlibrary while running as a plugin and getting Cakewalk's sndfile.dll and not their own and keeping it locked preventing the update. I killed their process and used the retry button and the install continued. 1 Share this post Link to post Share on other sites
Keni 136 Posted January 22 All went well except my browser opened to release notes for 2020.11? Share this post Link to post Share on other sites
whinnerah 0 Posted January 22 I had the same problem with installing sndflie,dll as Matthew Sorrels. Thanks to his post I was able to complete the install. Thanks again! Share this post Link to post Share on other sites
JoeGBradford 586 Posted January 22 13 minutes ago, Keni said: All went well except my browser opened to release notes for 2020.11? Opened 2021.01 for me. All seems ok initially. Thanks to the team and the testers for the latest release! Share this post Link to post Share on other sites
Noel Borthwick 3,016 Posted January 23 1 hour ago, Matthew Sorrels said: When trying to update to the final 2021.01 release (from the preview) the installer gave me this error: Using proc monitor I found that the WaveLocalServer.exe appears to have locked the sndfile.dll And it keeps running even after you exit Cakewalk. Perhaps they are doing a loadlibrary while running as a plugin and getting Cakewalk's sndfile.dll and not their own and keeping it locked preventing the update. I killed their process and used the retry button and the install continued. Indeed, this is some weird bug with WavesLocalServer that we found earlier. I've already reported it to Waves. If you run into it the workaround is to kill that task before installing or reboot the machine. I'm sure its not intended to be permanently running since a clean boot doesn't run it. 3 Share this post Link to post Share on other sites
Brian Walton 965 Posted January 23 Even using the stock themes doesn't seem like the new Selection buttons are showing up: Share this post Link to post Share on other sites
Promidi 546 Posted January 23 With 2021.1 Build 085, I am now unable to display the articulation map pane on a newly created MIDI track (Or SIT) in a new project. Clicking the PRV menu item: View | Show\Hide Articulation Pane has no effect. I can, however, display the articulation map pane from an existing project. But even on an existing project, a newly created MIDI track exhibits the same issue. I reverted to 2021.1 Build 075 and the View | Show\Hide Articulation Pane on a newly created MIDI track is worked again Anyone else experiencing this before I shoot a note to support? Share this post Link to post Share on other sites
Matthew Sorrels 1,586 Posted January 23 1 hour ago, Noel Borthwick said: Indeed, this is some weird bug with WavesLocalServer that we found earlier. I've already reported it to Waves. If you run into it the workaround is to kill that task before installing or reboot the machine. I'm sure its not intended to be permanently running since a clean boot doesn't run it. The funny thing is, if you start it outside of Cakewalk it doesn't even load a sndfile.dll until Cakewalk starts. But this kind of crazy happens when your background server app includes a full copy of Python and a ton of things you don't really have control over. Yesterday doing a Visual Studio 2019 update, it uninstalled Python 3.7 and then installed it's own version in it's own directory. Breaking all my Python stuff. I think this Waves thing is just the same kind of issue. Forum posts from Waves says you can kill the WavesLocalServer and it will restart when it's needed, but you can't stop it from running or you lose the new preset browser in Waves V12. Share this post Link to post Share on other sites
Noel Borthwick 3,016 Posted January 23 Crazy. I hope they can fix it otherwise I'll have to somehow rename the dll or hide it somewhere else. Renaming is tricky since we're now redisting a prebuilt version of Libsndfile since they no longer ship Visual Studio solutions that are up to date and its too complex to build. Much easier for us to manage just using their prebuilt binaries. FWIW I can't reproduce this on my PC even though I have Waves 12. Share this post Link to post Share on other sites
Glenn Stanton 317 Posted January 23 (edited) i had the same sndfile issue - it was locked by the Waves Local Server process - once i killed that process, it installed fine. as a note, i ran the NX headphone virtualized room plugin and that seems to kick off the local server. Edited January 23 by Glenn Stanton Share this post Link to post Share on other sites
Will_Kaydo 337 Posted January 23 6 hours ago, Brian Walton said: Even using the stock themes doesn't seem like the new Selection buttons are showing up: Try to resize your modules between small, medium and large see what happens. Share this post Link to post Share on other sites
EnglandBross 105 Posted January 23 Ciao Everybody , During the installation I've received this message ? what is the problem ? Thanks All Elix Share this post Link to post Share on other sites
Heinz Hupfer 127 Posted January 23 HI:) Arranger section inclusion of outlying MIDI notes This is exactly what I requested when the Arranger came out! Many many thanks to the Bakers.👍 Control Bar Select module changes Very nice:) Option to only use external MIDI inputs Indeed very helpful! Export to Standard MIDI File respects selection Time saving! Again a great Update for me. Thank you;) Bassman. Share this post Link to post Share on other sites
EnglandBross 105 Posted January 23 (edited) Hello , I can't visualize the entire Icon of "Control Bar Select module changes" what is the problems ? Thanks All ****Resolved**** -------- we have resolved overriding the Theme Editor --------- Edited January 23 by EnglandBross Share this post Link to post Share on other sites
solarlux 77 Posted January 23 (edited) When i delete arranger track section in timeline it works fine but when i delete in this place where sections placed i getting unexpected results in ripple edit mode. when i delete Section 2 Section 3 moves but without clips under it and clips of Section 3 are under Section 4. All works fine when i delete Sections in timeline but gives unexpecteed results when i delete section in view from picture Edited January 23 by solarlux Share this post Link to post Share on other sites
HIBI 227 Posted January 23 @EnglandBross The Ransomware Protection blocks accessing under the Documents folder as default. So temporarily off it and then run an installer. Share this post Link to post Share on other sites
solarlux 77 Posted January 23 How to fix this issue with DrumReplacer? Share this post Link to post Share on other sites
EnglandBross 105 Posted January 23 (edited) 31 minutes ago, HIBI said: @EnglandBross The Ransomware Protection blocks accessing under the Documents folder as default. So temporarily off it and then run an installer. @HIBI the ransomeware is off, I resolved the problem renaming this file in pict Edited January 23 by EnglandBross Share this post Link to post Share on other sites
In A Week 1 Posted January 23 12 hours ago, Brian Walton said: Even using the stock themes doesn't seem like the new Selection buttons are showing up: Same Issue. Also, i cant seem to be able to change my theme. I change my theme in cakewalk and exit, but when i reopen it again the theme seems to revert back to the one i previously had, it seems that cakewalk is fixed on that particular theme and doesnt change at all, pls someone tell me what to do, i want to change my theme so bad! Share this post Link to post Share on other sites
