Olaf 59 Posted July 28, 2020 2 hours ago, Lemar Sain said: Akai MPC software plugin hangs when loading sounds. I've had a similar experience with Waves Grand Electric 80, on loading the samples, with no audio driver set. I don't get the connection, but once I've set the audio I/Os, it loaded the samples normally. Share this post Link to post Share on other sites
noynekker 379 Posted July 29, 2020 2 hours ago, mancemusic said: Not 100% sure if it's just a setting reset or a bug, but ctrl+clicking plugins doesn't pin them anymore. Minor annoyance but a commonly used feature in my experience. Yes . . . I've seen this too, something is amiss with plugin recycling . . . doesn't work the way it did before . eg. I have to turn off plugin recycling to get my 2 (Ozone) plugins on the master buss to both come up together. ctrl+click will not allow both. Share this post Link to post Share on other sites
msmcleod 3,432 Posted July 29, 2020 On 7/27/2020 at 7:15 PM, foldaway said: Using Ctrl + Left Mouse Click to open multiple VST GUI's at the same time does not work in 2020.07 EA. nb. reposting as think it may have been missed before & this is quite a workflow killer for those who use a lot of plugins. Thanks. 8 hours ago, mancemusic said: Not 100% sure if it's just a setting reset or a bug, but ctrl+clicking plugins doesn't pin them anymore. Minor annoyance but a commonly used feature in my experience. 5 hours ago, noynekker said: Yes . . . I've seen this too, something is amiss with plugin recycling . . . doesn't work the way it did before . eg. I have to turn off plugin recycling to get my 2 (Ozone) plugins on the master buss to both come up together. ctrl+click will not allow both. FYI - this has been fixed for the main release. 2 1 Share this post Link to post Share on other sites
Heinz Hupfer 157 Posted July 29, 2020 Hi:) Great work!! Just one thing, but I don't know if this is perhaps Version 05 related: Goto next marker is now "Next Marker" OR "Next Section" Wouldn't it be better to keep it clear? Next Marker is Next Marker as it means it and Next Section is Next Section? Don't know how to get to next marker if a section end/start is in between markers.... Not a problem for Shortcut, I just press twice, but Midi Controllers can't see if it is a marker or a section! If I do selections with Controller it is impossible to select the region between 2 markers! Thanks;) Bassman. Share this post Link to post Share on other sites
msmcleod 3,432 Posted July 29, 2020 14 minutes ago, Heinz Hupfer said: Hi:) Great work!! Just one thing, but I don't know if this is perhaps Version 05 related: Goto next marker is now "Next Marker" OR "Next Section" Wouldn't it be better to keep it clear? Next Marker is Next Marker as it means it and Next Section is Next Section? Don't know how to get to next marker if a section end/start is in between markers.... Not a problem for Shortcut, I just press twice, but Midi Controllers can't see if it is a marker or a section! If I do selections with Controller it is impossible to select the region between 2 markers! Thanks;) Bassman. This was done primarily for Control Surface support, and also because we envisaged many users wanting to use Arranger Sections instead of markers. You can disable using sections for marker navigation, by changing the following in preferences: There's no need to restart Cakewalk for this setting - clicking Apply will apply this immediately. Note this does not affect the go to next section / go to previous section key bindings which will continue to work. 1 Share this post Link to post Share on other sites
Heinz Hupfer 157 Posted July 29, 2020 (edited) I'm making a new AZController preset and for selecting between markers and select sections it was not possible to do marker selections. Thank you very much;) In the Attachment you can see 1. Moving selection between markers and 2. moving selection of sections With your setting it works as expected! Bassman. NovationNew Preset Test - Cakewalk 2020-07-29 10-49-20.mov Edited July 29, 2020 by Heinz Hupfer Share this post Link to post Share on other sites
mgustavo 32 Posted July 29, 2020 (edited) Hi, thanks for the 2020.07 EA! The Staff View fixes are great, it's nice to see it working! I still didn't try the Arranger as I've been using CbB for simpler tasks, but it seems to be great! By the way, @Noel Borthwick I'd like to say files info on bottom of Media Browser are visible again! I don't know what happened [on previous version] but thanks God it's working! Edited July 29, 2020 by mgustavo Share this post Link to post Share on other sites
Noel Borthwick 3,404 Posted July 29, 2020 @mgustavo there is no change on our end AFIK so I have no idea why it was a problem for you in the first place 1 Share this post Link to post Share on other sites
Nelson Guimaraes MIDIS 4 Posted July 29, 2020 On 7/27/2020 at 4:19 PM, Jim Fogle said: Greetings Nelson and welcome to the forum. You've made some interesting suggestions. However many forum users won't see your suggestions or have an opportunity to comment on them. May I suggest you post your suggestions in the Feedback Loop forum section so all forum members will have an opportunity to review the suggestions? The Feedback Loop is here: https://discuss.cakewalk.com/index.php?/forum/8-feedback-loop/ hi, Jim! Thank you again! I'll do this! 1 Share this post Link to post Share on other sites
John 443 Posted July 29, 2020 Cakewalk just keeps getting better and better. All of the programmers have done a splendid job and keep on doing so. The feedback from Cakewalk is also a very greatly appreciated added feature. Thank you all. 1 Share this post Link to post Share on other sites
Mauricio Sanchez Garay 0 Posted July 29, 2020 Thanks band lab for the update Share this post Link to post Share on other sites
Stxx 15 Posted July 30, 2020 CRASHES CONSISTENTLY WHEN CREATING REGION FX w MELODYNE 4 EDITOR. Either crashes completely or freezes. Really slows down the workflow! Share this post Link to post Share on other sites
Esteban Villanova 349 Posted July 30, 2020 (edited) I'm having some issues with the arranger track. I recorded some midi and created an arranger section. If I move, copy it, or suplicate it, it doesn-t move the track content with it. If I define the section as a section type everything works fine. Is this by design? EDIT: Nevermind, figured it out! Edited July 30, 2020 by Esteban Villanova Share this post Link to post Share on other sites
Stxx 15 Posted July 30, 2020 On 7/27/2020 at 11:22 PM, Noel Borthwick said: There are no changes to ara in this release. Please provide a crash dump file so we can see the source. Crashes in melodyne 4 won't be fixed by celemony since melodyne 5 us the latest version. I suggest you upgrade. Included a dmp file from today Won't Wait 0729_07292020_202441.dmp Share this post Link to post Share on other sites
bitman 107 Posted July 30, 2020 30 minutes ago, Stxx said: CRASHES CONSISTENTLY WHEN CREATING REGION FX w MELODYNE 4 EDITOR. Either crashes completely or freezes. Really slows down the workflow! Someone said perhaps we should go to melodyne 5 to solve this. Share this post Link to post Share on other sites
Michael Heavner 1 Posted July 30, 2020 (edited) Thanks Again Cakewalk Team! The new version is working great for my production needs! If I could make one request? And, that is, with regard to "Clip" and the "Automation" envelope choices. For many years, I've had to do a time consuming dance between the 'Clip' and 'Automation' during my final mixing. I would rather the 'Clip' setting stay as the default choice. Personally, after automating my mix, is when I really tighten clips and edit clips/parts; as well as additional automation . I rarely, by comparison to working in the Clip mode, edit the Automation envelopes; I do at times edit the envelopes, but maybe 5%, it is just the dance around the "Clip" edit and "Automation" envelopes that slows down my production workflow. Perhaps a choice/setting to make the 'Clip' the default would be perfect, at least for my work in Cakewalk. Just my 2 pennies worth. Great work Cakewalk Team! Most Respectfully, -Michael Heavner Cakewalk user for over 30 years Edited July 31, 2020 by Michael Heavner cleaned up some grammar:-) Share this post Link to post Share on other sites
Michael Heavner 1 Posted July 30, 2020 3 hours ago, bitman said: Someone said perhaps we should go to melodyne 5 to solve this. Hey there, I had the same problem with Melodyne 4 and 5 . I have the paid version of 4, and upgrade to the paid version of Melodyne 5. But the new version of Cakewalk granted to us has solved all my issues. All the best, -Michael Heavner Share this post Link to post Share on other sites
Jonathan Sasor 840 Posted July 30, 2020 10 hours ago, Stxx said: CRASHES CONSISTENTLY WHEN CREATING REGION FX w MELODYNE 4 EDITOR. Either crashes completely or freezes. Really slows down the workflow! What version of Melodyne 4 are you using? Valid licenses of Melodyne 4 should have gotten a free upgrade to v5 I believe, check with Celemony for that. Early versions of 4 had some stability issues that were subsequently addressed. Share this post Link to post Share on other sites
Wookiee 1,785 Posted July 30, 2020 @Stxx What OS are you running? Share this post Link to post Share on other sites
Promidi 813 Posted July 30, 2020 12 hours ago, bitman said: Someone said perhaps we should go to melodyne 5 to solve this. Melodyne 5 is Windows 10 only. The op is using Windows 8.1 Share this post Link to post Share on other sites
