Jump to content

Recommended Posts

Do you want perfect sound from your mic that’s as close to natural as it gets?  If you own an SM57, AT4050, or MXL V67G, the following are EQs that will create a perfectly flat response.  Note that you will need the LP EQ (a.k.a L-Phase Equalizer) as this equalizer has enough nodes for the task, has a non-linear setting, and has a high quality, transparent sound (esp., compared to the ProChannel EQ).  First, place the LP EQ on an audio track FX rack (open the plug-in window for the LP EQ and click the Expert button, select Non Linear under Precision and Slow under Analyser for low latency recording); next, create a new aux track from the output of the first track; set input on the first track to your mic input and turn Input Echo ‘on’ (also 48V phantom power—only if you’re using a condenser mic, otherwise leave it off).  Now, arm the aux track for recording.           Recording with this input channel setup will produce some input latency, so go to Preferences and view your Input latency under Driver Settings.  Write down how many samples are shown.  After recording, set your Snap tool to Samples and enter this amount.  Set Snap to ‘snap by’ and zoom in to the front of your recorded clip.  Drag the clip left until it snaps by that many samples—this fixes your recorded latency entirely.  You can use this method for any input channel FX in the future, such as compressors and so forth.  Also, you can use these on tracks already recorded with the above mentioned mics by placing the EQ on the track’s FX rack.  Here are the EQs both written (for those not using the LP EQ) and uploaded (for those using the LP EQ).  Enjoy!  Sincerely, Maximus, Rock Mojo Studios.

I recommend using these on vocals when the most natural sound is needed or on tambourines, snaps, claps, etc.; try it on your guitar rig and you'll notice that the sound you get is exactly what was playing through the speaker(s) (perfect for when you don't want to change a thing about your settings!)

SM57 Flat Input EQ

(set each to Peak/Dip)

50 Hz, +10dB, Q 9.16

100 Hz, +5dB, Q 6.76

250 Hz, +2dB, Q 2.49

3,000 Hz, -2dB, Q 10.00

4,000 Hz, -4dB, Q 10.00

6,000 Hz, -7dB, Q 10.00

7,500 Hz, -3dB, Q 10.00

9,500 Hz, -4dB, Q 10.00

13,000 Hz, -1.5dB, Q 10.00

15,000 Hz, -2.5dB, Q 10.00

 

AT4050

(set each to Peak/Dip)

30 Hz, -1.75dB, Q 3.08

1,375 Hz, -0.8dB, Q 10.00

1,725 Hz, -0.8dB, Q 10.00

2,750 Hz, -0.8dB, Q 10.00

4,000 Hz, -0.8dB, Q 10.00

6,000 Hz, -2.4dB, Q 10.00

9000 Hz, -3.75dB, Q 10.00

10,000 Hz, -4.5dB, Q 10.00

13,000 Hz, -2dB, Q 10.00

15,000 Hz, -2.25dB, Q 10.00

20,000 Hz, +10dB, Q 10.00

 

MXL V67G

(set each to Peak/Dip)

20 Hz, +11dB, Q 10.00

30 Hz, +3dB, Q 10.00

38 Hz, +2.13dB, Q 10.00

50 Hz, +2dB, Q 10.00

60 Hz, +2dB, Q 10.00

70 Hz, +2.13dB, Q 10.00

85 Hz, +2.13dB, Q 10.00

100 Hz, +2.06dB, Q 10.00

150 Hz, +2dB, Q 3.45

375 Hz, +3dB, Q 10.00

400 Hz, +3dB, Q 10.00

500 Hz,+2dB, Q 2.03

1000 Hz, +2dB, Q 10.00

1,500 Hz, +2dB, Q 10.00

2,000 Hz, +0.38dB Q 10.00

3,500 Hz, -1.25dB, Q 10.00

4,250 Hz, +2dB, Q 10.00

20,000 Hz, +1.5dB, Q 5.55

AT4050Flat

MXLV67GFlat

SM57Flat

Edited by maxsthaven
Clarification
  • Great Idea 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×