Jump to content

Проблемы с аудио CWBL при использовании asio и reac


Recommended Posts

Приветствую разработчиков! Я  в курсе что основной разработчик SONOR Русский и очень горжусь т.к сам являюсь шкодером. Я пишу именно для Вас ребята - пока был сонор - была возможность маршрутизировать аудио через reac control panel и асио принудительно задавая входы и выходы которые тебе действительно нужны. Компания roland  мне отправили свой пульт м480 и 2 мультикора 6 лет назад - пульт замечательная рабочая лошадка -  прост и продуман до мелочей как и ваша программа сонор - изумительный по качеству продукт. Поставив драйвера для него Я не мучался - он сразу в соноре отобразился, Я задал выходы и входы которые мне были необходимы и прямо из сонора управлял пультом, соответственно получал 40 каналов звука с пульта по reac и мониторинг  не заморачиваясь выводил на встроеную звуковую и несколько других устройств персонального мониторина (подключенные по usb внешние звуковые карты и пульт) . С момента обновления на cwbl начались проблемы.  1ая - не страшная cwbl наотрез отказывался как либо взаимодействовать с m480 - тоесть Я потерял возможность двигать фейдера и всякую мелочь типа эквалайзера компрессора и прочего. Пульт у меня всегда под рукой и все что нужно Я делаю на нем уже не дублируя то же самое в программе хотя ранее такая возможность была и она была реализована замечательно. 2ая и основная  проблема заключается в том что cwbl не дает мне возможностей маршрутизации - и все было бы хорошо - (так как настройки маршрутов по каким то неведомым причинам не сбились и продержались как минимум пару лет до сегодняшнего обновления) - было отваливался аудиодвижок или вылетал при записи, или по каким то неведомым причинам съедал всю память, русский язык переставал воспринимать, сбивались настройки плагинов, миди отваливался, невозможно было на мастер назначить выход  - но это как то еще было терпимо - продут новый, дописывают, отладят еще итд - Я искал оправдания и старался терпеть - т.к. продукт сонор сделан моим соотечественником и был в высшей степени превосходен - Я верил в наших разработчиков.  Сейчас Я понимаю отчетливо (может быть Я не прав) проект cwbl  явно далеко от продукта под именем сонор и во главе этого проекта стоит не русский разработчик- т.к. функции урезаны, возможности ограничены, поддержка отменена, и самое неприятное - отношение к пользователю - вынуждают обновить винду до 8ки или 10тки - это стратегия запланированного устаревания - капитализм чистой воды основанный на бесконечном поглощении и вынуждении поглощать дальше чтобы поглощать и обогощаться. На сегодняшний день обновившись - у меня сбился маршрут и cwbl  отказывается назначать разные устройства на входы и выходы. Более того обновившись он предложил еще раз обновиться и сказал что для следующего обновления нужно поставить 8 ку или 10тку  windows. 
Да у меня была возможность обновиться на другую версию винды бесплатно ранее - но зачем мне такие проблемы - обновлять ос  на отлично работающем решении в студии звукозаписи? - Я и не обновлял - зачем мне сырое недоделанное простите что плавает в фаянсовом друге, постоянно просит каких обновлений - абсолютно неуправляемое тормозящее нечто в качестве операционной системы? - Я как абсолютно адекватный рациональный человек - до сих пор не вижу реальных необходимостей обновлять винду - только вынужденные. 

Причина по которой сегодня cwbl был обновлен простая - в очередной раз вылезла ошибка master bus muted т.к. у него нету устройства вывода. Мне надо записываться а у меня такая шляпа. панель reac так же не вызывалась с кнопки внутри программных настроек. что либо сделать было не возможно. Надо ли говорить о том что мой опыт: администрирования систем, бд, серверов, площадок до 500 машин, написания всяких клиентсерверных приложений, костылей к прогам, модулей,функций, и полностью адаптация 1ски под конкретные нужды предприятия на котором Я работал - мне не помог. Как Я сегодня только не танцевал с бубном. Что Я только не делал на разблокированной винде в среде разработчика - cwbl так и не увидел устройств. Если честно то Я устал от всех проблем что у меня появились с момента обновления. Очень хочется стабильной системы - именно этой - она продумана , понятный и удобный интерфейс, адекватность и гибкость в управлении - да и просто огромная сила привычки. Пожалуйста дайте возможность и дальше коммутировать различные между собой интерфейсы и устройства ввода вывода. У меня нет необходимости на сегодняшний день во внешней аудиокарте - у меня есть два цифровых мультикора  1608 и пульт - так вот даже их Я не могу подключить как отдельные устройства и патчить порты как мне надо. хотя ранее в сонаре данная возможность была и подключенных 3 устройства на ввод (2 мультикор и пульт по витухе), из них 2 мультика еще и на вывод стояли (витая через свич) и паралельно мастер шел на встроенную и на лайн6 карту юсб. Я много не прошу - ведь функционал был.

_____________________________________________________________________

sabj 2 eng
can't plug REAC 2inputs and realteck insidebox to output in one time (asio), audio egine failure, havn't sound on master cause master cant patch 2realteck when use inputs another devices. it appeared after update -and  another one next updates requires new version windows like a 8 or 10.  stabilized work  record on studio and concerts was been crash - cant do  recrd and monitoring with different devices (asio).  reac asio plug work but only inputs - outputs reac audio not working (on this input device too). - previously everything worked and it was possible to assign (many) different output and input devices.

Link to comment
Share on other sites

If anyone is interested - This is from google translate so you know it might not be exactly correct. 

 

Greetings to the developers!  I am aware that the main developer is SONOR Russian and I am very proud because I myself am a shcoder.  I am writing for you guys - while there was a sonor - it was possible to route audio through the reac control panel and asio forcibly setting the inputs and outputs that you really need.  The roland company sent me their m480 remote control and 2 multicores 6 years ago - the remote is a wonderful workhorse - simple and thought out to the smallest detail like your sonor program - a product of amazing quality.  By installing drivers for it, I didn’t suffer - it immediately appeared in the sonor, I set the outputs and inputs that were necessary for me and directly controlled the remote control from the sonor, respectively, received 40 channels of sound from the remote control via reac and monitoring without bothering, outputting to the built-in sound and several others  personal monitoring devices (usb-connected external sound cards and remote control).  Since the update on cwbl, problems have begun.  The first - not terrible cwbl flatly refused to somehow interact with the m480 - that is, I lost the ability to move the fader and all sorts of small things like the equalizer of the compressor and other things.  The remote control is always at hand and all that is needed. I am doing it on it without duplicating the same thing in the program, although earlier this possibility was and it was implemented wonderfully.  The second and main problem is that cwbl does not give me routing capabilities - and everything would be fine - (because the route settings for some unknown reason did not go wrong and lasted at least a couple of years before today's update) the audio engine fell off or crashed when  recordings, or for some unknown reason, ate all the memory, the Russian language ceased to perceive, the plug-in settings got lost, the MIDI fell off, it was impossible to assign an exit to the master - but it was somehow bearable - they would blow a new one, add it, exclude it  they still add, etc. - I was looking for excuses and tried to endure - because  The sonor product was made by my compatriot and was extremely excellent - I believed in our developers.  Now I understand clearly (maybe I'm wrong) the cwbl project is clearly far from the product under the name sonor and this project is not led by a Russian developer, because  functions are limited, opportunities are limited, support is canceled, and the most unpleasant thing - the attitude towards the user - forces you to upgrade Windows to 8k or 10k - this is the strategy of planned obsolescence - pure water capitalism based on endless absorption and the need to absorb further in order to absorb and enrich.  Today I’ve updated - I lost my route and cwbl refuses to assign different devices to the inputs and outputs.  Moreover, after updating, he suggested updating again and said that for the next update you need to put 8 ku or 10tku windows.
 Yes, I had the opportunity to upgrade to another version of Windows for free earlier - but why do I need such problems - update the OS on a perfectly working solution in a recording studio?  - I didn’t update - why do I need a raw unfinished sorry for floating in a faience friend, constantly asking for some updates - an absolutely uncontrolled inhibitory something as an operating system?  - I, as an absolutely adequate rational person - still do not see the real need to update Windows - only forced.

 The reason why cwbl was updated today is simple - the master bus muted error got out again since  he does not have an output device.  I need to record and I have such a hat.  the reac panel was also not called from the button inside the program settings.  it was not possible to do anything.  Needless to say that my experience: administering systems, databases, servers, platforms for up to 500 machines, writing all kinds of client-server applications, crutches for programs, modules, functions, and completely adapting 1ski to the specific needs of the company I worked for did not help me  .  Like today I just did not dance with a tambourine.  What I just did not do on the unlocked Windows in the developer environment - cwbl did not see the devices.  To be honest, I'm tired of all the problems that I have had since the update.  I really want a stable system - just this one - it is thought out, an intuitive and convenient interface, adequacy and flexibility in management - and just a huge force of habit.  Please allow further switching between different interfaces and input / output devices.  Today I don’t need an external audio card - I have two 1608 digital multicores and a remote control - so even I can’t connect them as separate devices and patch the ports as I need.  although earlier in sonar this possibility was also connected to 3 input devices (2 multicore and remote control by turn), 2 of them were also connected to the output (twisted through the switch) and in parallel the master went to the built-in and on-line USB6 card.  I don’t ask much - after all, there was functionality.

  • Thanks 1
Link to comment
Share on other sites

The only important part is written in English, the man has problems with REAC in the latest CbB version.

2 hours ago, lapasoa said:

I think is not correct to write a message in a language that nobody knows.

I think it is also not correct to claim that "nobody knows" the language of the largest country in the world 😉

Yes, it is not in the list of official languages of current "Cakewalk home". But since "Cakewalk country" has 4 official languages, I think it is ok to use different languages in this forum, no?

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

19 hours ago, pwalpwal said:

agree on language neutrality - it's a small world :)

op needs to tell which version of windows, cbb, audio drivers for the forum to help (via google translate ;):) )

I think he is using the latest CbB.  And I think only people which are using REAC can say something.

PS. Note that original message "style" is a kind of "Russian  technical spoken dialect", that is why automatic google translation has quite strange sentences.

@Анатолий Семенов

Пожалуйста напишите конкретную версию Windows, REAC (и других аудио драйверов) и CbB.  И пожалуйста используйте обычный лексикон, Гугл с Вашими "косяками и шляпами" не справляется. Если у Сонара когда-то были рускоговорящие разработчики, то их много лет там нет. Кроме того REAC от Роланда, они Cakewalk давно продали и соответствующую  поддержку устройств закрыли (до выхода Windows 8). Так что шансов на успех мало, но кто знает...

 

  • Thanks 1
Link to comment
Share on other sites

Don't know if this is relevant...

We have a setup running REAC (28 channels) recording live church services.

It consists of:

   - A Windows 7 (I hear Win 8 can work as well, but, definitely not Win10)

   - Sonar X3 (I've been informed it's the newest Cakewalk version that is fully functional as a REAC machine)

   - A Roland 200i digital mixer.

Following the directions given by Roland and Cakewalk we reliably record on a modest i5 setup.

You can playback through the same setup, except you have to have the mixer setup for it (easy enough with saving scenes on the mixer)

What you cannot do is playback & record at the same time.  The latency >1 second.

We bring the external SSD we record to back to the studio to edit and mix in CbB.

So bottom line, for us at least, it is a reliable 40 channel capture device  of which we only use 28 REAC channels.

Maybe some of this can help you come up with a solution.

That's we're using currently.

Good luck

Greg O

  • Thanks 1
Link to comment
Share on other sites

@Noel Borthwick previously responded in an earlier post that English is the preferred forum language so @lapasoa just repeated what has already been stated.  Unfortunately that was some time ago and I did not find Noel's post when I performed a quick search.

Having said that Google Translate is our friend and it is pretty easy for all readers to translate a post written in a different language into English.  It helps when another forum member with a good command of English follows up and provides whatever nuance and context Google Translate misses.

The primary language of the staff is English so it makes sense the staff prefers English in forum posts when those posts report issues.  Otherwise, perhaps English in a post is a courtesy but not as important as the poster feeling comfortable, welcome and engaged.

Link to comment
Share on other sites

I cant quite follow what the problem the user is having other than the fact that something doesn't work right with REAC. Since we no longer have a REAC system to test and it is no longer supported by Roland its going to be hard to troubleshoot.
One suggestion is to turn on "StopEngineOnASIOPanelOpen" since some Roland devices don't like the audio engine running when the ASIO panel is opened.

 

  • Great Idea 1
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...