Search the Community
Showing results for tags 'master fader'.
Found 1 result
Hi The Problem: I have a Mackie Control Universal, the old grey one. It seems to have developed a problem in that it sends intermittent, uncommanded midi signals which cause the virtual master fader in cakewalk to move rapidly up and down about a decibel in volume. It seemingly happens randomly, several times a minute, sometimes once a minute or less, lasting a few seconds at a time. I have used Midi-Ox to record the output signals - see the attached pic. My Mackie has the upgraded cpu chip (v3.0.0 up from v2.1.2) and two PWM chips, upgraded to v3.50. Things I've Tried: Tried 2 different Midi interfaces - a Focusrite 4i4 and a Miditech 4x4. I have taken the Mackie all apart and undone and redone all the connectors. I have swapped all the chips with the other upgraded ones from my mackie extender. I've also tried putting the old chips back in (v2.1.2). I've tried pressing every button and turned every knob and moved ever fader to see if something was sticking. I disabled the physical Master Fader on the Mackie by pulling its connector off and ran Cakewalk to see if that would stop the problem. It didn't, the virtual Master Fader still recieved a midi signal from the Mackie and randomly shook the fader up and down. Checked the Mackie is in MCU mode. Checked the controllers setup in cakewalk - Mackie first, Extender 2nd amd C4 third. Ran Cakewalk with just the Mackie and no extender or C4 controller. The whole setup seems ruined now. It was working fine before the weekend. As it only affects the virtual Master Fader (or the Bus Fader - depending upon what I have the physical fader set too in the Mackie options), is there a way of disabling the Mackies input to cakewalk's Master Fader? I don't really use it so I wouldn't miss it. I know I can select in Cakewalks Mackie options which fader to assign to the physical Master fader - either 1.Master Fader or 2.Bus Fader. I would like to be able to disable it completley. Any help would be really appreciated. I've spent all weekend on this. And as I said, my whole Cakewalk/Mackie setup is ruined by this. Regards, Chris