Search the Community
Showing results for tags 'virtual instrument'.
Found 40 results
-
Feature request — Multi-instrument tracks Something I really miss in Cakewalk by BandLab is a way to have a single MIDI track to control more than one VSTi instrument. If there is already a simple way to do that, I'm not aware of it. I need this a lot, because my instruments are usually made of more than a single VSTi (composite instruments) and, most of the time, I even need to play some of these instruments one or two octaves lower or higher than the others. How do other DAWs solve this? Usually, what I see most DAWs doing to solve this is through having built-in plug-in chains. For example, I like the Studio One instrument chain, however it poses problems for me when freezing and unfreezing these tracks, and it gets messy with relation to the mixer tracks involved. I also like FL Studio's Patcher, but it is limited in the sense that its audio output goes to a single audio track, requiring the "FL Send" built-in plug-in to route each VSTi instrument to its own audio track. Bitwig Studio has the most powerful implementation of this, in my opinion, as any MIDI or any audio can be manipulated along its route by design, being however a bit too complex sometimes. How could Cakewalk By BandLab solve this? The way Cakewalk By BandLab tracks and routing works is really one of the things I prefer over most DAWs. You can take advantage of this to solve this problem without needing any plug-in chains or similar. I suggest adding a way to add more than one output to MIDI tracks, so we can make a MIDI track to output to a Piano and to a String simultaneously, for instance. MIDI effects could then be added to the inputs of the instrument tracks. An alternative to multiple MIDI outputs is to have MIDI sends — the ability to add one or more sends on a MIDI track that sends its MIDI signal to a VSTi track, just like the audio sends. If possible, it would be nice that each of these MIDI sends could have its own MIDI effects chain. Other way that may not be so pretty is the ability to add "send plug-ins" on the track effects panel (MIDI or audio tracks). These could work for audio and for MIDI. These "send plug-ins" would send their audio or MIDI output to another track, which would have the advantage of the audio or MIDI being preprocessed before being sent. But, honestly, I would prefer the solution 1 or 2. Conclusion I know you guys work very hard to constantly improve this amazing (and unbelievable free!) software. If you find this feature could add important value to Cakewalk By BandLab and deserve your development time, it would make my day. I'm sure there are lots of other users who would also need this feature as well. Keep up the good work!
-
I have a particular use case and I'll do my best to explain it. I'm working on synthestration and my track structure looks as such: a Track folder with a bunch of instrument tracks in it Track folders labeled with a "version" of the score I'm working on. within these version folders are MIDI tracks that correspond to the available instrument tracks in the "instruments" folder. I make big changes to the score periodically and I essentially just duplicate the "version folder" which contains the midi tracks and continue from there. Yes, I could keep these version iterations in their own project files, but I like to have quick access to the previous versions. Loading in a ton of sample libraries in/out just to hear previous version, is not ideal. Also, I like being able to compare notes and harmonic structures, all in the same project. And midi data is small. This shouldn't be a big deal at all. The Challenge I'm constantly soloing out different groups of midi tracks in order to hear how they're playing with each other. When I solo a midi track(s), it works exactly as you'd expect. But when I unsolo the midi tracks, I get no sound, because the source Instrument track remains solo'd, but there are no corresponding midi tracks to feed the instrument track. I have to go to the console bar and click the solo button to un-solo everything and now I'm back to normal. This is unideal. What I'd like is that if you solo a midi track or group of midi tracks that feed an instrument track, upon un-soloing the last midi track that feeds the instrument track, both the last midi track AND the instrument are no longer solo'd. This would have a much more pleasant work flow. Here is a clip to show the issue directly: clip.MP4 -
(edit: if you want to skip reading the thread and go directly to info and download links go to > http://musictop69.wixsite.com/orchestools There will be a number of new instruments released next few months. Will use this thread to post them as they get published. The first bunch is set to be released on January 3rd. Starting with ORCHESTOOLS PIANO S | more than a piano rompler with tools to model your unique piano sounds and more. Free and Open Source- 19 replies
-
- 1
-
-
- vst3
- standalone
- (and 3 more)
-
hi i have done everything i can to get the virtual instraments working but they just dont show up only cakewalk tts-1 comes up can you please help me
-
So I was searching for free VST plugins when I found Native Instruments. This is what I have installed (I have installed all in my :D, not :C and in the Cakewalk VST folder - if this should matter): Blocks Base, Controller Editor, Expansions Selection, Guitar 6 Player, Kinetic Treats, Komplete Kontrol, Kontakt 6 Player, Kontakt Factory Selection, Mikro Prism, Play Series Selection, Reaktor 6 Player, Reaktor Factory Selection R2, Supercharger, Traktor DJ, Traktor DJ2, TRK-01 Bass. (Phew turned out to be longer list than I first thought lol). I have seen Guy Michelmore using Kontakt as an instrument track, similar to Spitfire LABS. What I understand is, Kontakt is basically where you can put all your VST plugins, and then you can put Kontakt in the DAW and use several instruments from only one instance. It is basically a manager so you don't have to look for each VST separately. Correct? Like similar to LABS - there is only ONE synth "LABS" but inside the LABS are various installed instruments. I also understand that before Cakewalk recognizing these, they have to be run separately first, which I did. But what I don't understand is how to add Kontakt and basically just like how to use Native Instruments for Cakewalk it is so confusing!!? I saw several videos saying you add it through the synth rack, but when I press the add button it does not say "Kontakt" anywhere in the dropdown! I am confused please help... Thanks in Advance. -
Hello guys. I'm trying the latest release and here the QUICK GROUPS (CTRL+"Parameter click") are behaving kind of weird for me. Here are some of the problems I can see (have not been able yet to reproduce 100% of the time, but still... ) I've seen these "problems" while testing ADDICTIVE DRUMS2. I've inserted 2 instances in my project. One using the "old" multi-out instrument insert method and the other using the "newer" INSTRUMENT PER TRACK OUTPUT method. (So, both instances are MULTI-OUT PRE FADER from the instrument). I'm playing the VM using only its internal pattern play button. So far, I thought I could notice a different behaviour based on how I inserted the 2 instruments. Not so sure now. Here what is happening on my end CONSOLE VIEW - Input gain knobs Parameters not always updating accordingly After some other tweaks with other parameters (not grouped), Input gain knobs values seems to changes randomly. Also, I'm even starting to wonder if there is not some kind of bug with the input gain know itself. Sometimes, my tracks / Buses in Cakewalk are clipping. So, I'm tweaking to correct using the GAIN knobs... Sometimes I am cutting as much as -18 DB and the readings on the meters are just slightly impacted. (Both for tracks and buses)... I'm going crazy or what? Project on my OneDrive: https://1drv.ms/u/s!AomdelJR9b9HjGbELCZm5J5v9plJ?e=rV8JN8
-
In this tutorial I go over how to use chord generators in Cakewalk by Bandlab. In this video you will see how I use Reason Scales and Chords | InstaChord | Chordz to make chords. I will show step by step how to set it up in cakewalk so that you can make chords faster and easier. -
Anyone please tell me how to install EastWest play in cakewalk by bandlab. I am using a windows 10 laptop with latest version of cakewalk
-
When I select a MIDI output (Coolsoft VirtualMIDISynth) in Cakewalk by Bandlab, this error message pops up. CPU: Intel Core i3 - 4005U @1.7 GHz 4 GB RAM Realtek audio I don't use any MIDI controllers or speakers. Sorry for the noob-ish question, cuz ya know I am a noob and a newbie with limited knowledge in MIDI
-
SPECIAL LIMITED-TIME DEAL: 2 DAYS LEFT Ultra™ - Viral World-Class COMPLETE BUNDLE 1.0 39.48GB KONTAKT 6 (kontakt 5.8.1 mininum) Important: Rare Edition Watch the official trailer here: https://youtu.be/VzWF9jjHf1o GEAR OF THE YEAR 2020 A GIGANTIC expression of emotions... Millions of ways to create, an immersion of inspirations... Explore innovative sounds. Access now to 39.48GB OFFICIAL and most POPULAR instruments, elements & sounds Live an Experience of music composing. boost x10 your music productions to the next level! Hundreds of Professionals Composers have already ordered Ultra™ - Viral World-Class Complete Bundle 1.0 Click here: https://www.designmybeat.com/products/virtual-instruments/ultra-viral-world-class-complete-bundle Watch the trailer here: https://youtu.be/VzWF9jjHf1o
-
Anytime I insert an instrument track with my favorite VST synthesizer MSoundFactory it loads a weird preset that I don't want. How can I replace that default preset with a better one? -
Howdy! So basically I have seen a couple of other forums about this issue but its worse now...I use cakewalk and komplete kontrol, and the issue here is specifically with the play series of komplete kontrol. The audio sounds fine as long as you load up the instrument from the play series and ONLY play on the midi keyboard without pressing play/stop (spacebar) but when you press play then stop it, it resets the cut off knob to zero and the sound becomes muffled and really low. it resets it every single time you press play and stop. The previous fix I found from another user was turning off the "zero controllers when play stops"...I went to check if I had it on but its not even there anymore . If anyone knows an alternative fix that would be awesome! Cheers and have a wonderful day!- 1 reply
-
- 1
-
-
- komplete
- virtual instrument
- (and 5 more)
-
Today, While recording a drumkit track (using my roland piano as midi input) suddently the drumkit stopped working properly. When i want to select the drumkit in the instrument section it automatically switches to MIDI only. I tried a reïnstal of cakewalk but that doesnt work. Can anyone help me out?
-
Hello all, I recently reset my Windows 10 Home and reinstalled my Cakewalk with all its instruments it comes with. When I scan the folders they are in, it shows "VST Scan. Scan complete. 52 Plugins found (......)" For some reason though, it does not show in the Instruments list. It only shows one third-party instrument - Waverazor. Any advice? Cheers, spacekid.90
-
For those synths that don´t have front panel midi learn, a good workaround is creating knobs in the Synth Rack for the automatable parameters and adding remote control to those. CbB reloads the knobs whit the synth, but it would be great to be able to save different assignment presets, especially for programs like Reaktor, virtual modular synths, or others that can have completely different configurations, to map to controllers with limited number of knobs.
-
I just downloaded cakewalk yesterday and tried to test out a simple drum track. I'm not using a MIDI and am instead just clicking on the drum set on the screen for the SI-Drum kit 1. I armed the track and pressed the record button but when I stop the recording nothing happens. I can see the sound levels rise when I hit a drum when recording, but cakewalk seems to refuse to acknowledge that I'm playing when it comes to actually writing notes to the track. Can anyone help?
-
Hello. I am, for the most part, new to Cakewalk and DAW's in general and I can't seem to get any sound out of Cakewalk no matter what I do. I do not have a separate audio card and I am just using my windows computer's sound card for now. I know that the sound doesn't work because I've tried messing around with the virtual instruments but I have had no luck. I can't seem to hear anything from cakewalk. I've tried changing the Driver Mode many times, I've tried changing the sampling rate and using the Wave Profiler to verify the sample rate. I've tried to make sure that I have the Correct Input and Output devices checked. It feels like I've tried everything and still no luck. Any help is appreciated. Thank you!
-
HI.. wonder if anyone out there is running BD by CW and both stores and loads their VST samples etc from an external SSD ? I picked up Sampletank MAX last year via a special offer .. I also bought a laptop to supplement my desktop .. the laptop has a 500GB NVMe drive.. With EZ keys products and Dim pro etc I have over 200 GB of samples which is ok on my desktop which has several hard drives but not so good on the laptop. Loading of large sample sets on the desktop can be slowish at times. I only have 8 GB of RAM on the desktop and laptop. I would like to use my latop as my principle music machine but wish to keep the desktop too. I was thinking of putting my whole sample set on an SSD and using for both computers. I guess that as long as the drive letter doesnt change after specifying the sample path then i'm okay ? Any advice would be appreciated.
-
I will be making a list of plugin's incorrectly loading their preset state after the cakewalk project has loaded. I will list the instrument or special effect involved and then the proceeding plugin's incorrect state, each separately as a reply for easier notification. All community having trouble with their plugins too with the same aspect of project loading plugins in the wrong preset state are welcome, long as it is directly informative and concise(for easier administrator reporting) for the Plugin name and then the preset state or errors. -
I'm still getting to know this DAW, and I need to be able to figure out why I'm not getting sound. The set up I have now was working before — at least I think it was the same set up. I changed the driver mode from ASIO to WASAPI shared, and that worked before. What do I need to check to figure out where the issue is? It looks like it's set up right to me. When I play, the meters don't respond at all. Any suggestions gratefully appreciated.
-
Get 10% off Blue Cat's PatchWork 2.42 Plug-In --- discount code: DIGIF008 https://www.bluecataudio.com/Products/Product_PatchWork/ And find more discounts at: http://www.digifreq.com/digifreq/deals.asp
-
I'm new to Cakewalk, but not to creating music or using apps. My challenge is setting up virtual instruments in Cakewalk. I know it's not set up right, because Cakewalk tells me every time I open it (screen shot below), and I'm getting no sound at all. For the last couple of weeks, I've been following instructions on various videos, and I've read the cakewalk documentation and followed those directions, and nothing is working. I've used FL Studio, Sibelius and Mulab, but I don't remember having to do the type of settings as in Cakewalk, and I don't understand how this works. How do I know what resources on my laptop are available to Cakewalk? What's a "driver model" (first screen shot below)? Apparently, Cakewalk isn't seeing any audio devices (screenshot below). Does it have to, since I'm using only virtual instruments? I'm using EastWest Composer Cloud. I'm able to select instruments and open the instrument and click on the piano keyboard, but the keys don't move and there's no sound. It's hard to know what to ask, but I have several screen shots below. I think I just need to know how to set this up. Thanks in advance for any help or suggestions you can offer. I get this message every time I open Cakewalk Preferences/Audio/Devices Preferences/Audio/Driver Settings Preferences/Audio/Playback and Recording Preferences/Midi/Devices Preferences/Midi/Playback and Recording
-
Hi Been a enthusiastic user of the free LABS from Spitfire Audio. And have been able to use multiple instances live for recording etc. in the past But since the 2019/09 update. Loading the player takes a long time with intermittent crashes, excessive (100%) CPU, and wildly fluctuating RAM usage. Requiring me to only use one instance and freeze the track. Which solves the problem. I suspect it is not an Cakewalk issue. As the recent BBCSO windows version has had many issues when reading other forums such as VI Control (this forum is a haven of civility compared to there!). I really wanted to get the new Epic Strings (only £29). But again it's with their player and it seems there may be issues again. Anyone one else use these and noticed the hike in CPU/RAM ? Any solutions? I'm going to hold off until things hopefully become more manageable. Using a SCAN built music PC, Intel 3.07 GHz, 4 g ram, 3 disk raid system. Interestingly the player is lighter on my old Sonar Producer 8.5. Thanks TA
-
MODO DRUM, IK's first physical modeling drum virtual instrument, is now available. A sequel to our MODO BASS software, MODO DRUM brings musicians of all styles and genres a new level of customization, detail and realism for their drum tracks. Buy MODO DRUM now and get the breakthrough physical modeling drum virtual instrument before the introductory pricing ends! As of September 2019 MODO DRUM pricing will be: regular version $/€399.99; crossgrade $/€299.99.- 7 replies
-
- 2
-
-
- virtual instrument
- vst
- (and 1 more)
-
VE PRO 7.0.877 • Added: Icons and context-menus for inserting Synchron Player and Synchron Pianos • Added: VIEW menu entries for save/restore default windows geometry • Added: VM1 Helper application for Windows • Added: Keyless demo version (separate installer) • Updated: VM1 Helper to v1.502 • Changed: Inserting instruments now always automatically selects their channels • Fixed: A rare crash in server advertising • Fixed: A bug causing some Wifi interfaces not to be filtered out when having more than one Wifi interface Synchron Player 1.1.1657 • Fixed: Auto-humanization settings not working for certain instruments • Fixed: Room reverb using CPU when idle https://www.vsl.co.at/en
-
- 1
-
-
- sample library
- host software
- (and 1 more)
