Search the Community

Get 10% off of the Blue Cat Audio Protector Limiter Plug-In at... http://www.digifreq.com/digifreq/newsinfo.asp?NewsID=5091 And find more discounts at: http://www.digifreq.com/digifreq/deals.asp

Get 10% off of the Blue Cat Audio AcouFiend Feeback Simulation Plug-In at... http://www.digifreq.com/digifreq/newsinfo.asp?NewsID=5161

I'm getting distortion when I record (for example) interface channels 1 and 2 as dual mono tracks in CbB. I do not get this distortion using Reaper or Studio One. I have found it true with any pair of interface channels seen to CbB as a stereo pair. Quick example: In CbB the first to channels of my interface may be addressed as: input 1 left mono input 1 right mono input 1 stereo If I record two microphones into interface channels 1 and 2 into a CbB stereo track as input 1 stereo I don't get distortion. If I record two microphones into interface channels 1 and 2 into a pair of CbB tracks using the sources input1 left and input1 right respectively I do get distortion. I'm really hoping it's a trick I'm missing, hence the post. The test: This experiment demonstrates the distortion artifacts found when recording low frequency signals in adjacent tracks within a stereo pair (by this I mean one microphone in left input 1 and the other in right input 1). An interesting note is that adjacent channels outside a stereo pair (e.g.: input 1 right and input 3 left) do not have the distortion artifact. Description of the test bed: The source is a upright bass playing pizz (sloppily) through a 2 octave chromatic scale The interface is a Focusrite Clarett 8Pre X (Thunderbolt) Two SM57 microphones on a stereo bar positioned 12" in front of the source One microphone is labled A and the other B Microphones are connected to inputs described in scenarios Microphone preamp gain set to 12 o'clock on channels under test No parameters changed between tests except as noted in the table below Recorded at 96/24 Exported at 96/24 no dithering General observations; No meter registered above -26 dB, (interface, focusrite control, DAW) while recording or during playback The quality of the distortion is akin to an extreme EQ boost with a narrow Q where you can hear the filter ringing at resonance. The distortion is present in both tracks - it is not an artifact of playing both tracks simultaneously. Outside that directly demonstrated by this test, level doesn't seem to change whether or not distortion is present. I have reproduced this problem recording amplified electric bass and also drum kit with strong low frequency components (e.g: low toms and bass drum, low power chords on guitar) with a variety of microphones (SM57, RE-20, K-2, SM25, R10, ...). In all observed cases the source recorded on both channels was the same (as in the case of this audio example) or similar (as in the case of low toms and bass drum where this is always bleed). Audio examples: Channel Test Mic A Mic B Result --------- ----- ----- -------------------- One 1 2 distortion Two 1 3 no distortion Three 7 8 distortion Four 6 8 no distortion Five 2 3 no distortion DAWS involved in testing: Reaper Studio One Cakewalk Hardware involved in testing: multiple Presonus interfaces (from FireStudio to StudioLive 16.4.2) multiple Focusrite interfaces (from Scarlett/USB to Clarett/Thunderbolt) The audio is too large to drop here - a link to the writeup, a picture of the recording setup, and a CbB project that demonstrates the audio artifacts may be found here: https://drive.google.com/drive/folders/10J5yQVtnrTSXbQws7KwNAfjCttG_5FFm?usp=sharing Thanks for any info.

Get 10% off of the Blue Cat Audio AcouFiend Feeback Simulation Plug-In at... http://www.digifreq.com/digifreq/newsinfo.asp?NewsID=5161

Hi Folks, In the last while I have been experiencing a problem where I try to playback a track and I get a lot of distortion and the playback is slow. Sometimes it will clear up if you let it play for a second but most times the problem doesn't stop. If you stop the track and wait a moment it will usually play properly although I might have to do this several times. This happens most often, but not always, when I have an instrument plugged in and attempting to play along with an existing track. It will happen when I am only playing back but not with as much frequency. This shouldn't be a resource issue as it will happen while playing back nothing more than a stereo drum track. I am running Windows 10 on an Intel I7 @2.93GHz, 24GB of Ram. Any help would be appreciated. Cheers Jimmy

Get 10% off all Blue Cat Audio products at DigiFreq... http://www.digifreq.com/digifreq/deals.asp#BlueCatAudio

Get 10% off ALL Blue Cat Audio Plug-Ins --- discount code: DIGIF008 https://www.bluecataudio.com/ And find more discounts at: http://www.digifreq.com/digifreq/deals.asp

Hi, Long time Sonar user. Thanks very much for taking the torch and carrying this great platform forward. Since installing and using Cakewalk by Bandlab, when ever I export a project, the resulting 44.1 or 48k wav or mp3 files are clipping and distorted on louder parts or even all the way through a song if the content is pretty loud. Everything sounds and looks fine while mixing and monitoring, no peaking or even near peaking levels. I've never had this problem with Sonar producer or platinum versions. I try using export profiles that I've saved and used over and over, or default profiles but that doesn't help. "What You Hear" profile has the same issues. If I choose to export busses, it will export each bus into separate files. If I mute the FX bus, and export just the master, the level is lower (noticeably lower than it should be) and there is no clipping but there is no reverb fx either. If I choose just the master it's fine, (lower but no clipping, and of not F/X reverb on the vocals....) I have my FX bus sending its output to my master so I should be able to export just the master buss and have a good mix with reverb, Right? I've read online that deleting the aud.ini file so cakewalk will rebuild it will fix this sort of problem but that had no effect either. Did Cakewalk change the way things are exported when they took over Sonar? I have to get a mix out for a music video this weekend on Saturday! Please help! Bruce Searl

Hey all. I've been dabbling with Cakewalk for the past month, enjoying it btw, but this one project, Track 2 (for reference), has been giving me constant issues. When I try to record vocals, I can only record for about 12-16 measures before the sound slows down, and the audio gets heavily distorted and almost impossible to listen to. Same exact thing happens when I listen for that length, and when I exported the file to a WAV, it distorts at a certain point (about a minute in). I've tried several things: changing the driver setup from MME to WDM, and ASIO, I've tried changing the buffer in Preferences>Audio>Driver Settings>Mixing Latency from 4 buffers in playback queue to 2 and 16 (2 made it worse, 16 was no different from 4). I've tried changing the settings on my VST instruments, switching out instruments, and that helped with a distortion problem I had alongside this, but not the whole issue itself unfortunately. I also deleted and reinstalled AUD.INI, and that did nothing either. If anyone has any suggestions, please let me know. Thanks in advance. -- Other (possibly important details): Computer: - OS: Windows 10 - CPU: Intel (R) Core (TM) i5-3320M CPU @ 2.60 GHz - RAM: 8 GB - System Type: 64-bit OS, x64 bit Processor - Storage: 1 TB Non-Cakewalk VSTs in use: BPB Cassette Drums 808 -- drums Dexed -- synth Distorque Azurite -- vocal stereo shaper Rough Rider - VST sound effect Xsub 808 - bass sub Tracks in use on the project: 12 P.S. If there's any other helpful information y'all would need, ask and I'll give.