Search the Community
Showing results for tags 'cakewalk'.
-
I am new to cakewalk and music production as a whole so forgive my poor wording. My speakers cant handle this 808 bass sample resulting in "crackly" sound when it plays. I'm not sure how to fix it, I have tried adjusting the sample rate and nothing seems to work. As I stated I am new to music production so I am using the default audio drivers on my Surface Book 2 laptop(Driver mode:WASAPI Shared Sample Rate:44100 Input and Ouput Devices: Realtek High Definition) If more information is needed let me know. Below I have linked how the audio should sound(lil peep 808 1.wav) and how it sounds when I play it in cakewalk(808 bad). Any help is greatly apperciated. 808 bad.avi lil peep 808 (1).wav
-
Hi folks! Would you like to know the full process of recording a song in Cakewalk from scratch, through to release on Spotify, iTunes etc? All from a home studio? I'm super excited to be announcing a new 15 part series where I demonstrate just that! WATCH HERE FOR DETAILS: https://youtu.be/Fh36S21Lqg8 I will also post each episode as its released in this thread * Please note that although Cakewalk by Bandlab is the DAW used in this series, some third party plugins are used although these are not necessary to complete this task. -
Hi folks! We each have our own way of doing things, but I thought I'd put together my 5 steps to a better mix (in Cakewalk by Bandlab). WATCH HERE: https://youtu.be/P8clJMIsFrk
-
Hi everyone, I would need, if possible, the cakewalk manual in Italian. Can anyone give me information? Thank you all in advance!
-
Howdy! So basically I have seen a couple of other forums about this issue but its worse now...I use cakewalk and komplete kontrol, and the issue here is specifically with the play series of komplete kontrol. The audio sounds fine as long as you load up the instrument from the play series and ONLY play on the midi keyboard without pressing play/stop (spacebar) but when you press play then stop it, it resets the cut off knob to zero and the sound becomes muffled and really low. it resets it every single time you press play and stop. The previous fix I found from another user was turning off the "zero controllers when play stops"...I went to check if I had it on but its not even there anymore . If anyone knows an alternative fix that would be awesome! Cheers and have a wonderful day!- 1 reply
-
- 1
-
-
- komplete
- virtual instrument
- (and 5 more)
-
I downloaded Cakewalk today and started trying the features. But my metronome is not working, I open the preferences to see what happend and the place where I should be able to choose the sound I wanted the metronome to play is blank and I can't seem to find a way to work it out. Any ideas? The image is in portuguese but it doesn't change much.
-
So, as the title says, for some reason, 27,000 measures were just added to my project, which make scrolling back and forth to find different sections pretty much impossible. Is there a way to delete a bunch of measures (as in removing the measures completely) at once? -
So i am trying to use step sequencer but its always greyed out. Couple of times I have been able to use it but it gives me this error and mutes the instrument. Fix?
-
Hi there, I'M using Cakewalk by bandlab with NI studio drummer plugin, I have created an audio track associated with one midi track for now, very simple. The sound is coming out from the audio track but not from the MIDI track, I have already pointed the MIDI output in studio drums to the track input in cakewalk, but still nothing, in MIDI DRUMS track I can set as an input either None (Omni by default) or select the Channel 1 MIDI but no sound showing in the meter bar on the right. Any idea what could be the problem? WOuld be easier to show you my situation in the following photos: Soft Synth Options are set like this MIDI Preferences are set like this MAYBE HERE SOMETHING I SHOULD SET AS AN OUTPUT? not sure how. or here?
-
Hi, I am downloading cakewalk since two hours now, and it stays on 0/2, I had choosen only intruments suite, how much time it takes to download please? And what is the size of cakewalk and the instruments suite? Answer me please
-
Hello, I just started using cakewalk with my Jamstik+ midi guitar and I was wondering if it was possible to mute certain notes (strings) with, preferably, some sort of midi pedal? For example, if you were to hold down a chord where you would usually mute a string or two in the fret hand, the Jamstik doesn’t process some of the strings as muted. The Jamstik does have 6 individual channels for each string, so I figure there has to be a way to do this, probably pretty easily. In theory, I’d hit a pedal to mute whatever strings I wanted. Thanks a lot for your help.
-
Good afternoon all, Hope you're well. Are there any programs to allow for distributed loading/streaming of plugins for Cakewalk? I have some large projects files and i'm beginning to reach the limits with my laptop and so I'd like to offload some of the processing requirements to another computer. I've investigated FX Teleport but this looks quite old now so wondering whether there's a more modern and affective way of achieving this. I've also found DAW Connect but this appears to be focussed more on cloud-services and relies on integration with plugin providers as opposed to being a local user solution. Thanks guys, Matthew
-
Hello. I'm using the Yamaha Ag06 Audio Interface. I'm also using a voice meter virtual program to calibrate. This time I installed it for cakewalk recording, but I can't choose my ag06. I tried reinstalling the Cake Walk, reinstalling the Amaha driver, and setting Yamaha as my default audio device, but I still couldn't catch it. Let me know if you know how to catch it. It's very urgent.
-
I have one MIDI track recorded with lots of tempo changes, but with the meteronome set to 120bpm throughout. I created a second MIDI track and manually inserted a note on every beat in the music. Each track starts at 1:01:000, contains a single clip, and is the same length. I select the second track, and invoke Process->Fit improvisation. Nothing happens, no momentary UI freeze, no change to either track, no popup message. I think I'm following the directions to the letter, except that I didn't "record" the second track from the keyboard, but its event list is just a big long list of Note events and nothing else. What could I be doing wrong?
-
Hey everyone: So i did the latest Bandlab update for cakewalk which seem to come our every 15 minutes and my tracks are all out of order? So i select track 2 and it plays the sound on track 5. Track 1 is fine and then i select track 3 and it plays the sound on track 4. Select 4 and it plays 5. They all seem to be out of order and these are all vst's on various sounds from drums to keys etc... Any ideas what is causing this? Thanks!
-
Hi folks, for those of you who want to make use of drum maps for easier drum programming, here is my easy to follow tutorial! WATCH HERE: https://youtu.be/sIquUl-7NfE
-
Added audio track, and now she's screaming...
Jeffrey Crosslin posted a topic in Cakewalk by BandLab
So, I am very new to Cakewalk, and over the last few days I've been learning the ropes enough to get back to tracking. Having said that, everything was fine until this morning. Now whenever I add a new audio track, some lady (presumably the warden of a women's prison) shouts at me "TRIAL!!!" until I panic and close the program. No plugins active when this happens. Windows 10 Pro 64-bit, Lenovo M92 with 8GB ram and 500GB HDD. PLEASE HELP BEFORE SHE INVADES MY DREAMS!! -
Hi everyone, I've been a Sonar user since the early stages already for a very long time. As I have transitioned towards this new version (that I still tend to call Sonar, sounds kinda cool), there were some minor issues surfacing from time to time which I plan to bring up eventually here. In this context, there is a problem with the MIDI assignment of inputs, which has changed since recently. Namely, when you connect a keyboard while Kontakt player is running and you assign the MIDI as it requests in a message, the inputs and outputs of all other MIDI synths will be randomly reassigned. However, when you plug in your MIDI controller and then run Cakewalk, everything is normal. I guess this is some sort of bug and needs to be fixed. Opinions and views are very welcomed indeed, perhaps there's some workaround or even fix that I haven't managed to come by so far for this. Cheers!
-
Cakewalk featured in NewTechReview Holiday Gift Guide 2019 http://www.newtechreview.com/newtechreview/2019GiftGuide.asp -
Do I need an internet connection, once I've downloaded and updated Cakewalk by Bandlab? right now I have Sonar Artist installed, but I'm curious about BandLab. I Only use Sonar with No Plugins for live use. Mainly for the Song list Feature and opening different projects for live use. I would like to use it without an internet connection. Thank you in advance! micdim -
Hi folks! Gain staging is a key skill to know in mixing, and there are some specifics for Cakewalk you should know. Even for beginners, the knowledge in this video can be applied right away! WATCH HERE: https://youtu.be/_0xw1QplA1o
- 3 replies
-
- 3
-
-
-
- cakewalk
- gain staging
- (and 1 more)
-
I'm trying to use the splitter in th3 and combine a modern and randall amp together. I wanna pan one to the left and one to the right but for some reason it's only coming out of the one side. The double amp preset has it where it's one amp coming out of each side. One minute it will work and the next it's only the one side. I'm not sure what I'm doing wrong here.
.thumb.png.c61dc7d62e979cb53a4d383c84a01623.png)
.thumb.png.99286e20b7f387390b89c941d47f1929.png)
-
Hi folks! Many people asked me to make a mastering tutorial for beginners. So here it is! Be aware that in this video I use a combination of stock plugins, and some free 3rd party plugins. IMHO, attempting to stick to CwB only plugins doesn't make sense for best results WATCH HERE: https://youtu.be/qpz8rdjUmRM
-
Is anyone else getting the following when importing a Bandlab project into Cakewalk?: This was working a short while ago. I get it after selecting File/Import/Bandlab Project. It pops up for each track in the project. No sound is transfered.
-
Hello ! it will be more than 8 months since I have a valid license key for Sonar Home Studio and Cakewalk Rapture Session that I still can not use. I have a non active Cakewalk account and I was wondering if there would be a way to solve it. because I'd love to use Rapture Session
.png.f5f1fed06eb888da8237785d6169608f.png)
.png.28d8743350d6e940f2398e4229eb1784.png)
