Search the Community
Showing results for tags 'adat'.
Found 3 results
Tascam US-20x20 COAX issue?
Multi-Sonik posted a topic in Cakewalk by BandLabHello ! I'm re-patching my studio today and stumbled with a little unexpected problem: Trying to use both SPDIF and OPTICAL ADAT on the Tascam. (ADAT connected to my Yamaha 01v96 and SPDIF to a JOMEEK preamp) Studio setup is up-and-running, no sync issues at all between devices. Device is in Audio Interface mode through the ASIO driver. Clocking: the US-20x20 is the master clock via WORCLOCK to the JOMEEK. Yamaha 01v96 syncs via ADAT. Problem: SPDIF signal is not being received by the US-20x20 (ADAT signals are working as expected) Sending SPDIF signal from a JOEMEEK TWINQ preamp to the SPDIF input of the US-20x20 does NOT work... BUT... when connecting the same cable from the JOMEEK directly to the SPDIF input of my 01v96 it works instantly. Tested also the US-20x20 in PREAMP and MIXER MODE. SPDIF signal not transmitted... Theory: must I complete the "SPDIF loop" (using both In/Out connectors) on the US-2020 for it to work? Asking because the JOMEEK only has a spdif out connector... Driver issue? Any other US-20x20 users around here using successfully both ADAT and SPDIF signals simultaneously ? Please advise. Regards, Cakewalkers!
ADAT input not recording on Presonus Digmax FS
John Downing posted a question in Q&AI have a Presonus Digimax FS going into an RME Frireface 800 using ADAT and it will not record in Cakewalk. I set it to the correct ADAT in Cakewalk and same input in Windows 10 settings. The mic test in Windows shows the mic working but it will not record in Cakewalk by BL or in Sonar Platinum. I can record using the analog inputs just fine. I am attaching a screenshot. I am using ADAT 4 (ADAT3 right) and when I select the analog it records just fine but ADAT shows no levels in the meter.
Hi Cakestalkers, I'm setting up a new Presonus Quantum with an existing ZOOM UAC-8 interface -- connecting via ADAT optical connector (yielding extra inputs for my old hardware synths). Has anyone tested or does anyone know what sort of EXTRA latency I can expect between the arrival of an analog audio signal at the ZOOM's input and the ultimate output from the Quantum into Cakewalk for recording/monitoring? I know the Quantum has near-zilch round-trip latency so I am primarily concerned with any extra latency imparted by the ZOOM during: 1. Input signal to and through ZOOM's AD conversion, to 2. ZOOM's ADAT output, to 3. Quantum''s ADAT input, to 4. Quantum's Thunderbolt output, to 5. Cakewalk's recording channel I guess I'm really just asking if, in steps 1 and 2, the signal will incur ZOOM's usual latency (call it x) PLUS any latency added in steps 3 through 5 by the Quantum (call it z)? Or will it be faster than (x + z) since the ZOOM doesn't really have to deal with any drivers or computer-related processing -- only its own? Thanks, Bill