Steve Patrick

Yup...that's the last one I tried to buy where my Jam Points didn't work. But later the same week they did. Was able to get my 30% off. Go figure.

Tried to purchase the Chicarelli Vocal plug but even though the Jam Points dialog is on the checkout page...and even though there is no mention in the email promo or on the checkout page saying Jam Points are invalid...it won't accept any points at all. This also happened for a sale purchase last year...but after waiting a few days and then trying to purchase again the points went through. So...I'm waiting again because...yes...I'm a cheapskate.

While I've discovered that I can load the tonex models into Amp 5, I'm still unable to do what I really want to: Tweak a preset in Tonex (which gives you much more control in tweaking the tone model) and then import that new preset into Amp 5. Even with my interweb sleuthing I still haven't found how to a: do that and b: whether this is actually possible or not. Your thoughts??

Downloading guitar picks?? I don't think that's possible unless you have a 3D printer.

Figured it out...they DO show up but just as the name of the preset along with eleventy jillion other models...not as ODS Legends group. So...I'll just have to name all my tweaks to these models with a proprietary name to get them to show up together in the list. No biggie.

Yup...that I can do...but the ODS Legends are a "signature" series and I can't get them to show up at all in AT5. I CAN get many other Dumble patches to list but not the special Legends group. Dern.

Yup Tom, I know that VST3s have the vst3 suffix. And the Pro-L2 is right there in the common files vst3 folder correctly. But no love after several scans and a re-install. But the VST2 works fine so no real harm...no foul.

I miss you guys too. But I am a lazy sumbitch as you know. And fairly self-centered. And distracted. What were we talking about?

I just picked this up and while I can get it to work in Tonex I can't for the life of me figure out how to get it to show up in Amplitube 5 which I would much prefer. Supposedly it will work but so far I haven't been able to sleuth how.

Hey Ampfixer, ol pal...yup I'm hangin around a bit...and hope to do more of it. I've missed all the swell eggs around here. And mettelus, I did a new install. No love. Dern!

Did the scan that Bitflipper suggested and the FabFilter Pro-L2 shows up in the scan of the Common Files Folder but still is not seen by the plugin manager. What next Bit??

Thanks to all for the suggestions. Yes I did a reset and scan. No love. The missing VST3s are all in the common files folder as they should be but don't scan. One...the new G-Force M-Tron has a weird suffix...not "dll" which I figure is it's problem. But the new Fab Filter L2 upgrade has the usual .dll suffix but still doesn't scan. And...yup, I miss you loveable lugs and should get back to hanging around more...maybe a New Year's Resolution?

Although it's with trepidation I do so, here's wishing everyone a better, happier and, most importantly, a more rational new year. I'm not around here that much anymore but I do miss the camaraderie of the old days. So kick out the jams ifn ya can this year. Also...I posted this in the main forum but I always think I'll get a better response here at the CH...recently after updating a few plugins I noticed that the VST3 versions were not showing up in the scan even though properly installed. The VST2 versions were there and work fine but the VST3 versions are not. Is there some new VST3 version out now thay Cake doesn't recognize or any other possible cause for this? And ... any fix??

Recently I've noticed after a few updates of plugins, the VST3 versions are not showing up in the plugin manager even though they are installed properly in the "common files" vst folder. Their VST2 counterparts do show up and function as normal but the VST3 versions don't. Any fixes? Or ideas?

Anyone else seeing this...or know why??

I just got the new MOJO 2 Horns library and loaded it on one of my external ssd drives. I registered my serial in Native Access with no problem but Native Access refuses to "locate" it no matter where I put it on any drive in my DAW. It looks like it wants to put content in C:Users\Public Documents but I have zilch in there and eleventy jillion libraries on multiple drives. Have emails in to all concerned but have only heard crickets so far. So...I'm turning to the brain trust here. Or am I???

My long time gripe with power supplies is that 99 % of the time they bear no marks/info or relation to the unit they go with. So if you don't label them...and who does??... you can end up a dozen or more power supply units that you have no idea which processor they go with when you're re-arranging your studio.

Agree with Jim, as per usual. But as an addition...if you want the best inexpensive, bang-for-the-buck mic check out the Aston Element. We use them here at the studio for voice over AND the occasional background sing sessions. Usually $149 but sometimes on sale for $99.

I recently received an email promo from the folks at Sonible that, for me, was too good to pass up. I currently own their smart gate and smart reverb and have been mightily impressed with both. And after watching myriad videos on the other three plugs in the bundle (smart eq3, smart comp & smart limiter) I'm sold on their system and performance. The promo was: as an owner of one or more of the bundle I could purchase the plugs I didn't yet own for $39 each. Just go to my account at Sonible, put them into my cart and purchase. There was no promo/discount code in the email so I figured it would just happen automatically once I logged in. No such love. No matter how I tried adding them to my cart and no matter how far I got in the purchase process they rang up at $65 each. Dern! I removed them from my cart and sent an email to support. Since they are in Austria it took a day for a reply but then they started by asking if I owned any of the bundle plugins. Since I already gave them my email this amused me. In any case they verified that it was a valid offer but did not tell me how to avail myself of it. I emailed back stating that I indeed owned two of the plugs already (and they could check in my account...duh) so would they please send instructions on how to get the deal and purchase the remaining plugs. But so far....crickets. Anyone else take advantage of this great deal??

I recently picked up a pair initially to replace my "B" monitors (Equator D-5s). My main monitors are an aging set of KRK V6 system 5s and I love them dearly. To say I was gobsmacked by the MTMs would be an understatement. Right out of the box, running flat they beat my KRKs hands down. And...after calibration with the included ARC mike and built in system they are simply amazing. How they get that much tight accurate bass response out of such small monitors is beyond me but I'm not complaining. And totally phase coherent. Wow. Highly recommended!

Thanks ol pal! Yup there was a 4/4 bar stuck in there from my default template. Fixed!

I started a new project today in 6/8. Opened my default template and set the time sig to 6/8 beginning at measure 1 and all the bar lines shifted accordingly. BUT the 6/8 only persists for 10 measures and then reverts back to 4/4. What gives?

Once again I'm needing to mix a song that was basically done in Garage Band. This time they were able to port out both the midi tracks and audio tracks but using multiple steps as Garage Band apparently doesn't want you exporting anything. The midi tracks all imported to Cake fine and were synced to each other. And the audio tracks seemed to import fine and be synced to each other. However...they were out of sync with the midi tracks and, worse, sped up as the song progressed. The original was at 93 BPM and the tracks were cut to a click. But the audio tracks start out right at 92 BPM and speed up to almost 93 BPM by the end of the song. Anyone know what might be causing this or have any info on how best to export out of Garage Band for importation to Cake?? Thanks for any info.

That's probably the reason...and thanks for the tip...as my keyboard controller is in a drawer under my workspace and I'm constantly forgetting to turn it on before firing up Cake to work on something. Then, when I need to use it to record something I turn it on and get prompted to add it back to the midi devices by Cake.

Well whatever it was I did or it did...it's working again. So, there's that.