Jump to content

Simon Wilkinson

Members
  • Posts

    22
  • Joined

  • Last visited

Posts posted by Simon Wilkinson

  1. 48 minutes ago, abacab said:

    Cakewalk solution: deselect "Stop at Project End", and run the Wotja project without an active loop in the Cakewalk transport. Wotja plays uninterrupted! :)

     

    That's good to hear you've fixed it! I've always had Cakewalk setup that way too (with 'Stop at project end' selected, so I have to loop an empty project) but for whatever reason it doesn't seem to cause an issue on mine. Anyway, well found! 

    One other thing I noticed with Wotja in Cakewalk is it does seem to make the now time marker move quite slowly and jittery if the plugin window is open while playing. As soon as I close the plugin's window, the now time marker moves a lot more smoothly. It doesn't affect the actual sound or cause dropouts for me but it seems to be pushing the processor a lot harder when the window is open, even if the visualiser part of Wotja isn't visible. Might be something worth trying if you get dropouts again at any point.

  2. 15 minutes ago, abacab said:

    I'm running a stable i5-9600k PC with 32GB RAM, Win 10, Focusrite 2i2 at buffer size 256, although I've played around with that setting. Tried ASIO and WASAPI with same result even using the Wotja internal sounds. When I use output to VSTi, the MIDI seems to drop out first.

    I've been trying on and off for over a year to get Wotja to run stable in Cakewalk . Basically got tired of testing when I found that it runs without issue in Reaper. Not sure what it could be, as I have been pretty much over everything.

    Glad that it's working for you!

    Hmm, not sure then. One thing that happened recently was I noticed my 1st gen 8i6 driver was outdated (maybe a year or more out of date). Even though it was working fine for me I saw something in the changelog that mentioned a fix for a Cakewalk issue so I thought I should update. After I did it actually seemed worse with a bit of occasional glitching and generally felt less reliable so I rolled back to my old version (4.87.4). Since then it's all buttery smooth again.

    Probably not at all related to your issue but it confirmed the old 'if it ain't broke' adage to me!

    Hope you have some luck getting it to work but if you've got it working in Reaper maybe that's enough.

  3. 12 minutes ago, abacab said:

    Just curious what your system specs are and what is your audio setup? Are you driving VSTi plugins in Cakewalk with the Wotja MIDI output?

    I'm running a pretty old but stable i5-7500 PC with 16Gb RAM, Win 10, Focusrite 8i6. I've only been using Wotja for about a week but mainly running it as a VSTi in Cakewalk using its own audio output. I have tested echoing it to other VSTi's (e.g. Kontakt/Korg Wavestation) and it works fine but I prefer its own output for now. Haven't had any dropouts yet although I have set the 8i6 buffer size a bit higher than usual (256) as input latency isn't an issue with how I'm using it.

  4. Just to chime in, the Wotja23 VST3 is working perfectly in Cakewalk for me. My PC isn't particularly high spec but it's working pretty smooth so far. I'm new to Wotja but bought the Pro license straight away because it looks such an interesting app. I haven't delved very deep yet but it seems there's a lot of scope and the devs are very responsive to feedback (I found a couple of minor aesthetic bugs).

  5. 14 minutes ago, azslow3 said:

    For X-Mini, it is simpler to start with https://www.azslow.com/index.php/topic,377.0.html

    Thanks Alexey, I have read and followed that post of yours before (and I spoke with you a while ago). Your plugin is really great and works well but whether I use AZSlow, ACT Midi Controller or Cakewalk Generic Surface I always get the same problem eventually.

    Sometimes ACT Learn picks up what I'm teaching it but after a while it just randomly stops recognising my movements (even if it's a parameter that it recognised previously). A restart of Cakewalk usually gets it working again (or as you say, by using your ACT Fix app). But then it happens again at some random point. The fact that after a restart it will then recognise exactly the same thing that it didn't recognise before the restart makes it look like some kind of bug in the way ACT works.

    ACT is *almost* usable but it's just a bit too buggy and fiddly in its current state. Hopefully at some point the use of control surfaces in Cakewalk will get an overhaul :)

    • Great Idea 1
  6. I'm in the same situation as @Starship Krupa in that once or twice a year I dig out my MIDI controller (either a Behringer X-Mini or the rotaries/sliders on my MIDI keyboard) and try to get them to play nice with ACT so I can have a bit more physical control with some VSTs but I usually end up giving up out of frustration.

    I can occasionally get it to work but not consistently enough to stop breaking my musical workflow. I usually want something simple like ACT learn to pickup control of maybe a filter on a VST synth and it will work once or twice but then I might try to switch control to a different parameter and suddenly ACT learn just ignores anything I do.

    I'm pretty sure it isn't user error because I'll try quitting Cakewalk and restarting and doing exactly the same ACT learn process and then it works again for a while until I try changing something and suddenly ACT learn ignores me again (yes I make sure the VST is always in focus).

    I've also tried using AZSlow which is great but I still get the same result that sometimes ACT learn just won't pickup my movements. Then I restart and it works fine again. I've also followed all the videos and advice above but it never works consistently.

    There's so much potential in how ACT can bring a bit of physicality to my workflow but it always drives me to frustration in how inconsistent it works for me that I just give up and resort to dragging a mouse around a GUI!

  7. On 10/22/2021 at 3:40 PM, John Vere said:

    @Simon Wilkinson

    Did you know you can batch process as many files as you want using most Wave Editors. 
    I often finish albums of up to 20 songs, export as Wave then batch convert to MP3 using Gold Wave. 
    All audio formats are supported as well as every MP3 option. no

    http://www.goldwave.ca/

     

    Thanks John, yes I often use Audacity for batch processing and final trimming/tidying up of files but I have some very case-specific projects where I still use CW for a lot of exports to mp3 where I use VST FX processing first, so it's still useful for me to stay within CW for those instances.

  8. On 10/9/2021 at 4:25 PM, gmp said:

    You can do this if you configure it in the External Encoder. Once you do that your 320 mp3 shows up in the Export list. I have mine setup to default to VBR4, which is a variable bit rate. It processes at 320, yet in areas that 320 is of no benefit, it reduces the bit rate lower. This way your ending file is smaller.

    I haven't delved too deeply into the external encoder. From what I've read, the LAME encoder is somehow incorporated into Cakewalk but does this mean you have to also download it separately if you want to configure it in the utility?

  9. I'd really like this feature too. I'm working on a project that involves bulk processing lots of exports and I have to change it to 320 every time. I'm pretty sure it used to recall the last used setting in a session before the recent update. And also would be nice to have the option to turn off the blue post-export notification!

    It's really good to see the export process being updated so thoroughly though, thank you!

  10. Thanks Colin, it's OK I'm happy to put in the work and create layered versions myself (in fact I've already made a good start on it). I just thought I'd check if there were any publicly available templates that would save me time. I'm pretty experienced with GIMP and Photoshop so I've already used a few colour shifting techniques but I'd like to get a bit more precise which is obviously easier when you can work on specific elements.

    Presumably the Cakewalk team have got these resources somewhere and seeing as how they already provide a theme editor it would be nice if they'd be willing to provide the icon templates to encourage more themers to give it a try (hint hint!) :)

    • Like 1
  11. Is there any way of finding a set of image files for the default icons that are in a layered or transparent format? I want to change the colour scheme of the default Tungsten theme and I can kind of work around it using GIMP to alter certain aspects but when you're working with flattened images there's always going to be instances where manipulating them causes pixelation and artefacts. 

    I know I could create my own icons from scratch but I'm so familiar with the default ones, I just want to change the colour scheme and it would be much easier to work with the original icons in layered format. I just wondered if Cakewalk have ever made the default UI icons publicly available?

  12. Love the latest build and all the great features that keep getting added, thank you! One thing I've noticed recently on my setup is that certain plugins (2 that I know for sure and I think there might have been 1 other) will have their GUI frozen or become blank after a certain time. The ones I know it happens on for me are Oeksound's Soothe 2 and Baby Audio's Smooth Operator.

    They start off working fine but after a random time, when I open their GUI it's either blank (like all whitespace) or it's visible but any real-time feedback (e.g. spectral movement or button animations etc) becomes frozen. The plugins still work but their GUI doesn't respond or update (happens on both VST2 and VST3).  If I quit and restart they work fine again for a while.

    These 2 plugins are new for me and I see someone else reported the same issue in a CW Facebook group back in January, so it might not be from the last update. Soothe 2 has the option to turn off OpenGL but that doesn't help.

    I have a 3 monitor setup running on an Nvidia GT730 graphics card with all latest updates if that makes any difference.

    • Sad 1
  13. 2 hours ago, msmcleod said:

    You'll probably get more consistent results recording automation in Latch mode:

    Bingo! That's perfect, thanks so much Mark. At first I thought it wasn't going to work as it still looks very 'stepped' while you're recording the write automation but as soon as you stop it automatically smooths the nodes out. Just what I need :)

    I've been a Sonar/CbB user for years but goes to show there's so much stuff under the hood that I'm just not aware of!

    Thanks to everyone for all the suggestions, now back to the music...

    • Like 1
  14. 10 minutes ago, Will_Kaydo said:

    Yeah - I just checked now at home. There's no like that. I might be mistakenly thinking of another DAW where you can even it our just by a key down. 

    What if you landmark your automation nodes under the Customization > Snap to Grid TAB? Than try and hold down either Shift; Ctrl or Alt individually or combine them as you writein your Automation? 

    Just trying to help with some idea's - i swear I've done something like this. Just not sure if it's with Cakewalk?

    Urgh!!! Middle-age is creeping up on me - sigh.  😣😢

     

    Lol, I appreciate the help Will!

    I'll take a look at your Landmark nodes suggestion in a bit. That's something I wasn't really aware of for nodes.

    Trying to speed up my workflow by using a MIDI controller but I feel like I should just work around it for now and get stuff down. Before my middle-age turns to senility and becomes its own landmark node ;) 

  15. I posted this issue here about problems when write automating envelopes using a control surface and getting a smooth envelope:
     


    It would be great to have the option to select a default envelope node style when recording write automation (e.g. jump/linear/fast curve/slow curve). Or at least to be able to highlight multiple envelope nodes and bulk change them all to a certain type.

    At present it's almost not worth using a control surface for this sort of thing and would make workflow so much easier!

    It also seems to show there's a bug when you right click to drag select a bunch of nodes and then press delete on the keyboard. It doesn't delete all the nodes you've highlighted and leaves a few behind that you have to right click select again and press delete a 2nd time.

    • Like 1
  16.  

    3 hours ago, Nigel Mackay said:

    If you look you will see that there are sections which are straight lines.

    Until you get better advice you can use the CAL script Thin Controller Data. Process -> Run CAL. You select the range, run the script and enter the controller number. It will reduce the number of steps. A bit easier to fix.

    Thanks for the suggestion Nigel. I haven't used CAL scripts much before and I tried your suggestion but couldn't get it to do anything. The envelope is a volume envelope so I selected the active track, ran the CAL script and entered channel 7 then tried a variety of values for 'Delete every Nth event' but it didn't make any changes to the envelope at all. The envelope in question is just a write automated volume envelope for that track so I'm not even sure that it is channel 7 as it's not MIDI information. The Event view for that track shows 'n/a' under the Channel heading for all envelope nodes so maybe CAL is no use in this instance?

     

    4 hours ago, tonemangler said:

    Instead of deleting nodes to create a more linear envelope you could use the pencil tool, in freehand or line mode, to trace over your controller generated envelope.  However, as you say, it kind of defeats the purpose of using a controller.  Jumps occur when no controller data is detected, so if you stop moving the controller at any time during the recording a jump will be generated.  I'm not aware of a setting that will change this behaviour, however I don't use a controller so I could be wrong, someone with more experience may have a workaround.  Good luck.

    This method I had more success with. Although I've used Cakewalk/Sonar for years I guess I've become accustomed to a certain workflow and never really used the draw tool before! So it looks like the best way for me to do this is to do a write automated pass using my X-Touch Mini to get a basic idea of where the changes in the envelope need to be, then use the draw tool to manually draw over it all and smooth it out by hand. I'll need to make sure I get rid of every node in the original envelope as even leaving a small jump in the original envelope will cause a click in the audio. Seems a bit of a hack but at least it should achieve a result!

    Thanks for the ideas :)

  17. I'm trying out using an X-Touch Mini controller to record an automation envelope for a soft synth. What I'm trying to achieve is a smooth volume envelope that moves up and down through the track. After I've done a pass with write automation enabled, what I end up with can be seen in the attached image. So basically lots of 'jump' nodes when what I really want is them all to be 'linear' for a smoother transition.

    When I listen back on headphones I can hear lots of very subtle clicks each time it passes a jump node. So firstly is it possible to set default write automation nodes as 'linear' instead of 'jump'? Or is there another way to achieve this? I thought I might be able to bulk select a group of nodes and change them all to linear but that doesn't seem possible unless I've missed something.

    The only workaround I've found is to kind of manually average out sections by looking for linear places and delete lots of nodes and replace them with one long linear line. But not only is it a pain to do over long tracks (and kind of defeats the purpose of the more natural method of gradually turning a physical knob or slider) but it seems quite buggy. I'll highlight an area with lots of nodes by right clicking and dragging then press delete on the keyboard only to see that it doesn't delete all the nodes I selected. Say I mass select 40 nodes and click delete, it leaves behind maybe 10 of them that I then have to highlight again and delete. 

    automation.jpg

  18. On 7/31/2019 at 9:58 PM, Helene Kolpakova said:

    And here's another which I finally caught. It's not unique to 2019.07, but annoyed me for years now. Would love to see this fixed.

    Short Description: some VSTs get all MIDI ports selected on the corresponding MIDI/Instrument track as a MIDI In port after the track is armed for recording.

    Reproduction steps:

    1. Insert one of the problematic VST synths in a new project.
    2. Create a corresponding MIDI/Instrument track if not created automatically.
    3. Notice that by default the MIDI In on that track is set to None (Omni).
    4. Arm the track for Recording.

    Expected:

    Typically, the MIDI In port of the track is then switched to "All Inputs - MIDI Omni"

    Observed:

    For some synths several MIDI ports are selected at the same time which looks like this

    image.png.c1ae677e5f3a311aead6c6d97a1dbce0.png

    Known VSTs affected: 

    • All NI synths (Komplete Kontrol and Maschine 2 are especially hurting in that regard)
    • Adam Szabo's JP6K and Viper
    • TAL U-no-LX-V2
    • chipsounds (but chipspeech is fine)
    • AudioRealism ABL3, ADM (but ReDominator is fine)
    • Novation V-Station
    • Cakewalk z3ta+

    VST known to work fine:

    • LennarDigital Sylenth
    • Reveal Audio Spire
    • U-he Diva, Repro-1, Repro-5
    • AAS synths
    • Xfer Serum
    • Cableguys Curve 2
    • Cakewalk Z3TA+2

    This behaviour is consistent on my machine, i.e. it survives reboots, CbB restarts, is independent of the project and project template.

    Also while testing, I noticed that SonicProjects OP-X PRO II crashes CbB on insert - it's working totally fine in Komplete Kontrol though. But KK is affected by the weird MIDI Input ports issue.

    I get this too. Follow the same steps as Helene reported, e.g. I insert Kontakt, arm record and my inputs then switch to this (see attached image). I always have to remember to double check the inputs or I end up with all sorts of weirdness after recording a take (e.g. doubled up recorded notes and clips etc.)

    multiple_inputs.jpg

    • Like 2
×
×
  • Create New...