-
Posts
165 -
Joined
-
Last visited
Posts posted by Bassfaceus
-
-
thanks for the replies...
I am exporting entire mix/entire project with all required trax selected.
Exporting offline with 200MS buffer size...i have intel 12700k with 32 g ram SSD Drives
so i dont think its a computer horsepower issue..
The first time ,i got a muted vocal that had unmuted itself therefore giving me an obvious double effect on the exported track
(yes i am sure it was muted) that was easy to pick...
The 2nd time it was a busy mix and a clip that was Hidden in the track manager (by mistake) ...Didnt play
(maybe thats why? but then again why?))
The track had already been uploaded to Spotify for their album launch ...guess who looks like an amateur?
Went back exported again and presto the clip sounded..
The thing is I dont want to lose trust in CBB
but if this happens again i must seriously consider switching with another DAW.
David Baay ..thats a very good idea about phase inverting the export...
Although i dont see why i should have to confirm the integrity of the export.
needless to say i cannot duplicate this fault as it is like i said..."Random"
Thanks for responding
PS The 2 tracks in question had both been exported many times before on their journey to completion
without problems...and nothing has changed system wise ..no new plug ins etc and the
mangled (?) exports occurred on different days
-
Hi all...
just recently i have been working on some large projects with lots of Tracks/clips/vst fx etc
And its happened twice now that the export will either.... in the 1st instance UNmute a clip from a
comped track and in the 2nd instance MUTE a guitar clip...
As you can imagine this is a little disconcerting that i have to make sure that the Export is correct..
It is NOT operator error..
.The first time it happened i was willing to let it go but now its happened again
and ive picked up the error after the tracks have been submitted to the client and uploaded to Spotify for their album launch
needless to say they cannot reupload in time for the launch...(this makes me look incompetent)
So im wondering if this has happened to anybody else? AS far as i know its never happened to me before.
Thanks
-
thanks for that helpful response JuTuneTech.
I was wondering if i could map the control key on my keyboard to a button on the MINI.
as you know holding the control key and mousing produces the FINE movements..
Thanks
-
RE Azslow 3
thanks for trying to help
-
Hmm ....
the more i look into it
the more im thinking that the pros of staying with Cake
outweigh the cons...
ive been experimenting with the ACT controller
and if i limit myself to the first eight rotaries of my
X Touch MINI (which i also own)
i can use both surfaces together and have the mini just for controlling
VST knobs
Now what i want to figure out is how enable FINE control
(which i would normally do by pressing /holding CONTROL and
mousing the parameter knob of VST) in a way that avoids me pushing down on the rotary(X TOUCH MINI ) which is cumbersome to do
I would much rather hold down CONTROL but this doeant work.
Any ideas
-
ive downloaded a demo of Studio One
and it integrates the X Touch with 3rd party VST
way better than Cake....but it leaves out some things
in navigation that are a trade off.
Studio One does look and feel more sophisticated than Cake
but it is no where near as flexible as far as i can see.
Might have a look at Reaper next .there are some 3rd party
files that extend the X Touch features..looks very interesting
-
Glad to see i have stimulated some
interesting discussion.
I am starting to think that it will just be easier to
use my mouse as i have been doing.
Even if the control surface did work as i wanted
i would still be attributing rotaries to many ( some times too many )
VST controls too many to keep track of.
Something like the Slate Raven type of interface is what i would
ideally like... the more i think about it the more i think that
mouse manipulation is the best method ..
I am old school i started on Tape and large format desks
so twiddling knobs is where i come from
- 1
-
thanks for the thorough and thoughtful
response from everybody...
im not interested in controlling synths or any other VST i
all i want to do is control VST fx
like an EQ plug in:
instead of using my mouse i can nominate a group of rotaries on ,
pref my x touch or if not my xtouch MINI
but then i will have to have 2 surfaces connected which i would like to
avoid due to space restrictions
-
Thanks JuTuneTech
what do you mean "also customize the settings a bit to use the full LCD support,"
Also the mapping you mentioned for the Mini is intriguing,
is this something you are willing to share with me?
Thanks
-
Thanks for the replies..
Ive been trying to do this for a while now.coming back to it every few months
and yes ive done my fair sharing of reading and watching Youtube videos.
Just so we dont get confused I also have a Behringer X touch MINI...
this does react to Cakewalk ACT... but my main control surface is
the big one ...Ok so this wont react to ACT...
So in a few words can you tell me or direct me to some answers
I dont care about VST i i just want to manipulate The VST.
Thanks
-
Hi all..
I have the big X touch and have /am finding it frustrating that i cant control 3rd party VSTs
(should i be able to get some of the buttons to react to ACT learn
coz i cant get that happening)
Ive been trying to work this out for a while now and a, coming to the conclusion
that other DAWs have better integration
Particularly Reaper and Studio one...
they are able to control 3rd party vsts and do a lot more.
Part of me is wondering if this will be rectified in the new release
The upshot of this is that i hope i dont have to abandon Cakewalk
to get these features.
I would rather not have to learn another DAW.
any body have any ideas to get the x touch to do what i want???
Thanks
-
Thanks all
I think its sorted now.
I set the bios to not check legacy devices and a few other things.
one of them stopped the SSD from disconnecting...so all good now
-
Ok with further observation i have discovered that the problem
is my external ssd disconnecting and reconnecting which is causing the problem.
I have checked and all the power saving options and all have been set to OFF.
This is a desktop and i have all my Cake audio files on an xternal SSD..
I do this so that i can disconnect the drive when not in use to prevent any kind of
Ransom ware or virus problems (once bitten twice shy, im afraid).
Like i said its a new build based on 12700k and gigabyte Z790 MB and 32g DDR 5 ram
500 g NVME
The xternal SSD drive is connected to a USB 3.2 Gen 1 port
which runs at 5Gpbs..
So where do go from here?
what else could be causing the SSD to dis/reconnect
PS ive noticed that it happens randomly wether running Cake or not.
Thanks
-
well none of my plugins are demo...
all genuine not pirated...and worked flawlessly on my old computer for years.
Fabfilter ,,
Also once the static has begun it will not stop until i close and open Cake.
Lets say its not the plugins what else could i look at or
check when it does it again...
PS Buffer size is 128 samples so not too tight
-
HI all ..i have an RME UFX and with my new computer build
Intel 12700 Gigabyte MB 32gig ram etc
I am getting random blasts of static when running Cakwalk . Not often but its disconcerting
particularly when i have headphones on..
It never happened for 5years with my old computer..
I know must be the computer right?
Doesnt sound right somehow
when it happens ive tried turning of all the plug ins but the static continues...so not plug in
and while its happening i can stop Cake and succesfully play an audio file with Win media player etc
So something to do with Cake??
There is no other audio device only the RME
So where do you think i can look for a solution?
If i close Cake and reopen the static is gone and
i can work again.
I am at a loss
thanks for reading
-
Hi all
not really a cakewalk problem but never the less i have to switch to Firefox to search Cakewalk .com because
Chrome will not show PNG images it will if i right klik and "open link in new window" but not in the original page.
It happens on 3 of my computers so it seems its not me but Chrome.
Is this happening to you guys?
thganks
-
thanks re reading my post i can see i have not described my query clearly...
what i want to is clik on a clip and drag it by moving to the right or left of the
window..no problem doing this but if i am really zoomed out
i must keep my finger on the mouse and clip for a really long time sometimes...
is there a way to increase the speed of this scroll so that i may traverse great distances quickly?
-
Hello all...
how do i speed up dragging a clip from
one position to another
EG.. i am zoomed in on the monitor i can only see 12 bars of my project
but my project is 100 bars long .
what i want to do is drag a clip form say bar 12 to bar 100
but its so slow because of the zoom in..
i seem to remember that there was a modify keyboard key that i coul klik to speed up the move
or am i imagining that?
Thanks
- 1
-
yep that was it...
Workspaces..
Thanks all sorted now
- 1
-
Doesnt make any difference .
Heres something that looks strange...
the floating control bar appears as soon as the start screen appears.
thats not right is it?
-
yep done all that
nada
-
Hi all
a few days ago i was reading
about the control bar and decided to experiment
with a few different positions/sizes
and since then it will not dock to either the top or bottom of the window
in any project.
no matter whicj project i open it remains hovering in the position
of the last unsuccesful docking attempt.
i have to reposition/dock it every time i open Cakewalk
Very frustrating any ideas??
thanks
-
Thanks for the response..
been having a fiddle with CAL file
and its not a bad way to go about it.
quick question,
how do you print the track ? thru aux channel or freeze etc?
can you expand on that and also how do you print a sereo track say Toms?
thanks
-
What i want to do is create my drum track with midi
then record those tracks to Cakewalk and then process some more.
I know , i know, Kontakt has all the fx /mixer etc.
but im old school i like having them printed.
so with that out of the way
How would you do it...bounce out to stereo or mono trax.?
is there anything i should be mindful of?
will they sound the same once recorded.
what about recording the Kontakt room and overheads...
cant get my head around that..
anyway any insight /instructio will be helpful.
PS im pretty sur of got them coming out to seperate DAW racks OK
Export randomly mutes clips
in Cakewalk by BandLab
Posted
thanks all...
yes i do i check.. but when trax have so much orchestration ,as these do... they are
for a musical so; many voices ,full band, horns and strings and subsidiary foley sounds...
its a little hard to keep on top of everything...
but yes it is up to me to check.. and i do to the best of my ability
having said that i dont need my tools to arbitrarily behave in random ways
and compound my anxiety....
Yes i check always ....the title, textual content, audio content, video content, codecs, sample rates, bit depth, etc etc etc etc
and i dont anticipate that clips being left out or added to be part of checking the integrity of the mix... I ALWAYS check my mixes...not an amatuer.
Anyway suffice to say that most of you of not had this happen to them
and its only me....
Thanks for your suggestions and your time...
PS I never bounce out in real time...always offline