Jump to content

Terry Kelley

Members
  • Posts

    863
  • Joined

  • Last visited

Posts posted by Terry Kelley

  1. Send any examples you can to Noel.

    V-Vocal isn't supported anymore but it might help determine if something else is happening especially with clip bouncing or if the issue is really is with Melodyne.

    I know there are many suggestions going back 10 years on how to make V-Vocal work reliably but in reality it's dependent on your project and how memory is being used. The simpler the project, the less likely it is that V-Vocal will crash but as you build it up it will eventually go south.

    Try everyone's suggestions - one might work. Melodyne has been known for being very stable but maybe it's now running into similar issues. The developers need example projects to fix it.

  2. 58 minutes ago, sjoens said:

    Not for recording.

    ^This! What brand are you using?

    Some reviews say the units are too aggressive about pairing whenever their phones are nearby or cut out repeatedly.

    I ordered one from Amazon over a week ago but they still haven't shipped it, tho they say it's "in stock".

    Check your PMs. I am no sure what the forum's policy is on product placements. Don't expect much more than 20ft of range though depending on your walls.

  3. 4 hours ago, sjoens said:

    Any ideas how to add Bluetooth to your mixer output for remote room monitoring?

    Looked at several Bluetooth TX/RX on Amazon but some reviews aren't so promising.

    John's point is important but as far as transmitters what doesn't look promising? I've bought three different transmitters and they all work. Charge, input music, connect, listen. It is challenging to connect with devices that don't have a display so you know what you are connecting to. None that I have use a PIN though.

    I use one to listen to the output of Cakewalk via my headphone jack when I am doing other things. Works fine. I would never attempt to record with it unless I planned on doing a lot of time sliding. The delay is at least 50ms

  4. Glad you posted this!

    I had been periodically having glitch/stutter issues using certain plugins like MUnison and MHarmonizerMB. Things would be fine and then go south and back to fine.

    I was going through Preferences looking for something else one day and noticed Read Cache was enabled. I don't recall setting it but I might have in frustration trying to fix a problem. So I disabled it.

    I haven't had an issue since. I read the manual and some comments from people about why it happens but never found a satisfying answer. I don't know if cache was taking too long to fetch, fetching the wrong stuff and having to flush or what ...

     

  5. One of the developers commented sometime back that the ASIO settings aren't always available to Cakewalk to allow you to set via Preferences/ASIO Settings. I can change my M-audio interface via Preferences but not the Presonus - I have to run the external program.

    So the "ease" of getting to the settings will vary depending on the interface. 

  6. Thanks Noel,

    Looking at the dates for the versions, the first project version was on 11/05/21 and I added the side-chain on 11/08/21. I follow the EA's closely and I show I got EA 27.11.0. .034 on 11/1/21. I was definitely on an EA when I started. I am guessing .034 since I usually install the latest EA when it comes out.

    Any way you can tell me where this solo in the side-chain is? I'm looking at the project and I have the bass side-chained to the bass drum but nothing shows any soloing. Maybe that's what you mean by "internal" - I can't access it.

    I'm not sure I know enough to recreate it at this point. Since it works in 2021.11.018 I'm not sure what to try. But hey, I'll try anything once. I might just need to chalk it up to a fluctuation in the aether.

    Terry

  7. That's why I don't report every single issue. I might toss out some observation (hey, anybody else notice this?) but just because it went goofy on me doesn't mean it's definitely Cakewalk. I just close the program, reboot or maybe change a setting and see what happens. More often than not the issue goes away or disappears until what ever combinations of things I did make it reappear.  If I can narrow it down, then I might bring it up directly with the developers. Sometimes I actually find something but more often - I haven't.

    Real bugs will generally be reported by people with a diverse set of hardware/OS. At that point the developers jump on it.

    • Like 1
  8. On 11/11/2021 at 5:42 PM, tecknot said:

    Hi Terry,

    Wouldn't Aim Assist ("X" on PC keyboard) work for you in this instance?

    Kind regards,

    tecknot

    Yeah! And thanks for pointing out I'm an idiot! :)

    I read the manual and never saw it but maybe it pays to browse the shortcuts and see if one describes what I am looking for - first.

    Where's Bdickens when I need him ...

  9. Hi Noel,

    Yes, I sent him a bundle, he opened it and it wouldn't show any meter activity on any track that wasn't solo'd. At first we thought it might be some hidden track (as suggested here) or something with the master buss. He toggled the global solo button several times. He also rebooted a couple of times. After messing for around 30 minutes I told him to update since I knew he was behind a bit on updates.  Bang, it worked. He was on the 2011.06 version.

    I'll pull up the trouble version.

  10. 2 hours ago, Noel Borthwick said:

    There are major changes to the solo logic in 2021.11 so its not surprising that older versions may have issues with solo.
    The solution is not to use new projects with soloed tracks with older versions. There are bugs in the old versions that didn't handle solo properly.

    @Michael Reynolds which version of Cakewalk are you seeing this problem in?

    Maybe it's the wording but the issue isn't solo'd projects it's that you can't play them without soloing the tracks.

    Still, I'll take the improvements of 11(015).

    Terry

×
×
  • Create New...