Tommy Byrnes

I grabbed this primaraly for the 3A. This is a really good plugin! Being able to M/S is a great feature.

I concentrate these days on primarily the Unison stuff and have all the ones I want at the moment. Being able to track through the plugins is what led me to UAD 8 years ago. Native plugins have come so far that they rival a lot of the UAD plugins, though being able to off-load CPU cycles to the UA hardware is very helpful as well. The real magic is with the Apollo pre/Unison plugin signal chain. For instance, I usually track electric guitars by miking cabs through the Helios console in a Unison slot, followed by the UAD Distressor. Sublime. It got me back into committing the sound "to tape" like the old days as opposed to trying to fix stuff downstream.

The Neve 1084 is wonderful (I like it better than the 1073. The upper mids sound smoother and less spiky to me), the Avalon VT-737 and the Manley VoxBox are go-tos on vocals (the VoxBox is also great on a bass DI), the SSL 4000 gets used for tracking almost everything, as does the API Vision. The plain Neve and API preamps alone do wonders to an incoming signal. The Helios, though, is a secret weapon. It's about as surgical as a grenade but push it a bit and it sounds amazing.

To be sure, it's a sizable investment to enter into the UAD world but it's helped me make better, more inspired recordings from the very first day.

11 hours ago, heath row said:

hmmm, makes me think you haven't tried it, because it's nothing like you seem to think it is. One thing you got right is that it's not as versatile as Sunset and Fame, but the 'aircraft hanger' thing lol.

For me it will be getting a lot of use on the drum bus, and again for me it's one of those things that once you put it on, you can't go back to the way it was. I'm Rock, Hard Rock (don't read that as to mean metal) and it is fitting so well, makes the drums sound so good, love it.

True, I did not demo it, just based my snark on the audio examples.

The other two in the Studio Series (Fame and Sunset Sound) are super versatile and one or the other is on just about every project to put things in a room together. I don't think I'd want to run my stems through what will make them sound like they were recorded in an aircraft hanger. This would be great for "that" sound but I doubt I would use it enough to grab it.

I love this idea, though and hope other great sounding rooms make it to this series. Putting different stems through the Fame verb with subtle pre-delay, along with the various positions available in the plugin makes me think I'm mixing tracks recorded in a really great sounding room.

My tracking room is small and tight so sometimes I'll use Sunset Sounds, which has a bigger, more "rock n roll" sound to it to open the sound up.

The Farm Stone verb seems less versatile to me.

This is the one BF sale I was hoping for. Soothe 2 is amazing. I used the demo a couple of months ago and was amazed at how much better my mix was with just a bit of resonance supression on a few offending tracks. Regular price was a bit too high but I'm in on the sale.

This is a wonderful EQ!

5 minutes ago, scook said:

All settings under Preferences > Project are stored in project and project template files.

Create new or modify existing project templates as desired and use them for new projects.

Thanks, Scook. I figured that might be the case.

Hi folks,

Is there a way to set the multi-track grouping that is located in Preferences/Project/Multi-Track Grouping so that the default is Always group all tracks? A couple of times I've forgotten to check this when recording drums or whole bands and have had to go back and manually group them afterwards to keep the tracks and takes lined up. No fun.

I looked through the ini file but didn't see anything. It would be great not to have to worry about it and avoid the "holy crap, I forgot"  feeling.

Thanks, as usual, for the help!

CPU gobblers at any price.

Holy moly! The ability to turn on or off all instances of a plugin is huge, especially when using channel strips across multiple tracks. Quick group delete all instances is also much appreciated. This is a great update. Thanks to the Bakers!

This really is a drum DAW. It's an amazing piece of software and I use it every day. I have most of the others but I rarely go to them anymore. What I can do inside SD3 is crazy.

If you can swing the very expensive $295 you should consider it. No demo, though, as there is 4,921 terabytes of samples to download.  🙂 The upgrade price was doable when it first launched so I jumped and and am really glad I did. I can't imagine crafting drum tracks without it.

3 hours ago, TheSteven said:

Meh...
I soured on Motu long ago - bought one of the original  Ultralights in 2007.
Lemon from the moment I opened the box - device had issues, audio had issues, drivers had issues. Support strung me along for months submitting endless log files, testing new drivers, etc... 
Finally replaced it with another DAC and never looked back.
Never sold it because it didn't feel right ruining someone else's day for a few bucks even though at the time funds were in short supply. 

I'm sure the new generation is much more reliable, can turn turds into gold, etc. but MOTU permanently lost a customer with their shenanigans.

I had a similar experience with the Ultralite and customer service around the same time. I won't go into all the details but it was such a problem I wrote a letter to the president of MOTU. MOTU and I reside in MA. I mailed it on Friday and on Monday morning I got a call from his wife and the company's CEO. We spent two hours on the phone, discussing what MOTU could do better (Windows drivers and tech support, for starters), our kids, her amazing Marine Corps dad, the plans for the company, etc. Within weeks they revamped their customer service protocols and vastly improved their Windows drivers.

We have since become friends and regularly chat. She's sent me products to try out and keeps in touch. MOTU gave lots of money to a benefit music festival I used to run before Covid. MOTU has a very loyal customer and I recommend their products to my clients and students over Focusrite and others. And their products are wicked good, as we would say. My little interface for travel and teaching is the M2. Kills the Scarlett 2i2. Drivers are rock solid, excellent converters, mic pres are actually OK and it's built really well.

When Gibson did the knife in the heart thing I moved briefly to Studio One before the CbB era. One of the things I missed most was the Plugin Manager in Cakewalk. I would be lost without its versatility. Here is how I have my plugins laid out. I have several custom menus, which I couldn't do in S1.
 

1 hour ago, David Baay said:

Just to clarify, the summary was taken from previous posts I've made where the primary goal was to clean all audio folders in one go, but you don't have to do that. Before you get to that point, CWAF shows you everything you need to know about where every project's audio is stored and which projects are referencing which wave files. I still think it would help you sort out what happened.

You're probably right, David. I just ran out of time. I did run it and it did show the files I needed as orphaned so I just went to the folder and imported the files I needed into a new  project.

I bit the bullet and went through the project audio  folder, took the correct files and just rebuilt the project. There were four full band takes so making sure each track corresponed to the right take was a bit of a pain but it's back and running, just in time for my clients to get here. That was a close call! Thanks for the help, folks. I'll have eagle eyes on what the heck I'm doing from now on.

16 hours ago, reginaldStjohn said:

I would contact Cakewalk Support (Support@cakewalk.com) to see if they can help you.

Did you move the project from one disk to another?  Could it be that the copied the audio but not the project file?

Everything is on the dedicated projects/audio drive. It was a long session and I was pooped at the end of a crazy long day so I really don't know what I did. Nothing got moved as far as I know.

17 hours ago, David Baay said:

Run the Cakewalk Audio Finder (CWAF) Tool from the Utilities menu. when it's done, you can click on projects to find related wav files or vice versa.

CWAF is the tool everyone loves to hate. It's ancient and awkward in some ways, and slow because it's thorough. 

It helps to do some setup first to make the searching more efficient; here's a summary:

Preparation:
 - Create a folder called “CWAF-Excluded WAVs” at the same level as your Projects folder.
 - Create a shortcut to \Program Files\Cakewalk\Shared Utilities\cwaftool.exe so you can run it with CbB shut down.
 
Usage:
- Close CbB.
- Empty the Recycle Bin.
- Start CWAF Tool.
- Add your “Excluded” folder and any other paths on the drive that will never have  projects or audio in them to the Folders to Ignore list (it helps if your Projects folder is at the root of a drive with few other root-level folders).
 
- Select a drive to search (usually just the drive with Projects on it).
- Click 'Find'; the button label will change to 'Stop', and you will see paths being searched in the status bar at the bottom.
- Wait for the Stop button to change back to Find, indicating the search is complete.
- Click the 'Status' column header to get all the 'Orphaned' files floated to the top.
 
- Select all the orphans, click the Move button, and select the CWAF Excluded WAVs folder on the local drive as the target.
- Repeat the search and sort, and scroll through the list to be sure there are no Orphaned or Missing files reported (i.e. you found all the orphans, and didn’t inadvertently move something that wasn’t an orphan).
 
- You can now safely Shift+Delete (permanently deletes, bypassing the Recycle Bin) all the files in the “Excluded” folder.

 

This is great advice but I am trying to re-associate the files and not remove them.  What I'm wondering is ifthe actual project file got deleted somehow and left behind the audio files. Yet, there is a project file with the right song name but the wrong audio. What a mess!

Hi folks,

I'm having a problem that I've never experienced before. I finished up sessions with my client this past weekend and when I went to open one of the songs this morning it opened a completely different song. I've checked the audio files folder and the correct files with the correct project title are in there but the Cakewalk project file is associated with another tune and will not open the correct audio files.

I tried to import the tracks into a new project but of course it imported each file to its own track. This is mostly laying down live drums with several takes so trying to sort it out manually seems impossible, given the number of tracks, which was over 150 when each clip was imported. Yikes! The stuff of nightmares!

So, how do I get the project to recognize the correct  audio  files that go with the project and not point to a completely different song? I'm sure I messed something up but I can't seem to find what I did. It's a real poser and I've been at it for a couple of hours without any luck. The band is back in this weekend and I need to suss this out before they come in. Redoing the tune is not going to go over well and not really an option.

As always, thanks for the help.

Cheers,

Tommy

I really wanted to like this more than I do. It's kind of fun but I'm just not crazy about the sound of the verb.

They had the Master HD on sale a month ago for $29 and it's about the best software purchase I've made in a very long time. I love the controller. It's so nice to have a tactile interaction with the plugin. And, now I cannot live without it. Hands down the best multi-band processor I've used and it now lives in an ever growing number of templates. My Sweetwater guy knows to use the Emergency Broadcast System to tell me when the Brickwall HD comes up for sale.

If this reverb is on par with the Master HD I'm all in!

4 hours ago, heath row said:

This thing absolutely ROCKS!!!

The sound, the feel, it abounds and it's real!!

Excellent job IK, I mean it's hard to stop using it to do anything else.

I have to agree. I've been down this rabbit hole for hours. It feels real. I got Capture as well so I'm looking forward to modelling my amps. I know my clients will love this!

5 minutes ago, Peter - IK Multimedia said:

Sorry about that if you could give me your ticket number I'll let our Support Manager know you didn't hear back.  But for any cabinet connections you'd want to use speaker cable for sure.  So to/from cabinet would be where you'd use speaker cables otherwise I'd recommend using the cables the gear would normally use (so TS for amp input, etc).

Reminds me I need a bunch more of both as well as balanced cables, MIDI cables and more for the patchbays.  Oh yeah and XLR cables and more balanced cables for the "jam area" I'm putting in the front room.  IT NEVER ENDS

Thanks, Peter. I figured as much but I wanted to double-check. Looking forward to using Capture with Tonex!

1 hour ago, Peter - IK Multimedia said:

Jason is one of my favorite AmpliTube users and guitar YouTubers, I'm glad he has TONEX Capture and soon TONEX software.

I enjoyed this. Peter,  I've pre-ordered Capture and have it ready to go except for one thing. I've contacted tech support twice with no response. Do you know what cables are needed? Do you use speaker cables, standard TS cables, balanced TRS cables? I'm excited to use it to it's potential but I don't want to blow up my amp! Thanks!

This is wicked cool. The possibilities are pretty endless. StudioRack  is a great tool for setting up custom multi-band, parallel and series splits.

7 hours ago, Tony Carpenter said:

I’m weak.. I gave in. I just had to grab the Amek TMT console… oh well lol. 

Me too. I must say, I'm pretty impressed with it.  I had raw tracks from a mix I haven't started yet and threw the  AMEK on all the tracks. It sounds great! I love the limiter in the Dynamics section. I don't know if it was on the actual console but man, does it help on drum and bass tracks!

A really nice piece of kit for a tenner.