reza sadeghi

On 10/8/2022 at 5:53 AM, Alan Branch said:

Did you ever get this working? I realise this is an old thread, have a VS700 still in box, received as a gift & hardly ever used be great to know if it’ll work as a controller with Logic. Or does anyone know if it’ll work?

Sorry for my late response. I moved to Logic after 20 years working with cakewalk.  That's why I haven't been here to check my messages. Unfortunately , it is not working with logic out of the box and you need to map it.  Even if you map it, it won't be recognizable with the new OS. No driver for new OS. I bought a C|24 control surface and Vcontrol pro to communicate between C|24 and Logic pro. All are working grate.

Cheers 

On 7/9/2021 at 8:38 AM, mriley333@gmail.com said:

This has sold, it is gone. Thank you!!

May I ask, how much you sold it? I have a set and to let them go. They all have boxes. Also, sonar 8 and x1 are included in the package.

On 3/28/2022 at 11:56 AM, Mark D. Anthony said:

I am interested if you still have it

I have a whole set for sale in mint condition. Comes with all the boxes and sonar 8 and x1. I live in Canada/Vancouver.

On 2/19/2021 at 6:37 PM, Jim Fogle said:

Cakewalk reported in another thread they approached Roland about (1) obtaining an updated driver, (2) providing support for Cakewalk to update the driver or (3) giving Cakewalk specifications and permission to develop a driver.  Roland does not seem to be interested.

Thank you so much 

56 minutes ago, NealClark said:

The Roland website is the place to go for support on your VS-700 but it mentions this with regard to the 10.5 driver.

* When you use this driver version, you must update the V-STUDIO 700C (Console) to the latest System Update v1.31.

You can find more inforamtion here :-

https://www.roland.com/global/support/by_product/v-studio_700/updates_drivers/

Thanks for the info. I already did all what you said . I am using sonar for about 25 years or more . After purchasing this controller I was so happy that finally I have got a controller that fully supports Cakewalk. But after couple years Roland stopped the supporting the vs 700 . I remember when the Bandlab started to take over the  Sonar they were thinking about finding a way to make the controller back to work . But I never heard any more. I thought may be someone has a solution for that.

Thanks anyway

Hi guys,

Does any body know if there is a possibility to install the driver on OS Catalina? I tried but it says it is not compatible with this OS. As I researched the driver is 64 bit and should be compatible with Catalina  which run just on 64 bit.  It was working on Mojave but not on Catalina. Is there any solution to force it to work  on Catalina like the way we install it on windows 10?

Thanks

Does anybody know if there is any  definition for vs700 to use it on Logic pro? I have both sonar and logic and I am looking for any template or something like that to make my vs700 more compatible with logic pro. 

I already connected logic to my vs700 and chose the Mackie control in its control surface setup.  most of the important stuff like faders, pans, solo, mute, record and transports are working but some buttons like save, save as, automations,...are not working and needs to teach them to logic pro.  

Thanks in advance

19 hours ago, tonemangler said:

As far as I know you cannot name input and output drivers separately, this is just one of the quirks of Cakewalk. I changed the naming scheme to "input 1-2, input 3-4, input 5-6 etc, just to make it easier for my little brain. 🙂

Thanks for your reply. Yes, it is so confusing. 

Hi guys,

Is there any possibility to rename the input tracks separately? Cakewalk doesn't show my inputs separately and shows them as Stereo. I cant name input channel 1 and 2 with a different names. It just shows same name for both input 1 and 2 and just add left and right at the beginning of the name. I have Orion HD that comes with lots of I/O and cakewalk shows them all as the pair channel.

Thanks in advance

Hi guys,

Does anybody know if I upgrade my Melodyn which I believe mine is version 2.1 if I am not wrong, to the new version like 4 or 5 should be compatible?  

Thanks

7 hours ago, chuckebaby said:

So im guessing you didn't try the test I mentioned ?

Just try bypassing the FX and do a test export. It should take a few seconds.

I tried what you said. no difference.  I turned all the plugins off and tried.

I am working with sonar when the version was 1.4 on a floppy disk. it is about 20 years  this issue is not normal. I believe it might be an update on windows 8.1 . maybe?

13 hours ago, Lord Tim said:

Yeah, that's crazy big. The .CWP size has no bearing on the bitrate or anything like that - it's basically a document with pointers that references the big audio data elsewhere.

Are you definitely saving as a Normal Cakewalk Project (CWP) rather than a Cakewalk Bundle (CWB)? It's not out of the question for a bundle to be that big and take ages to save.

My bad. The cwp is not 1.91. The whole project with Audio folder is 1.91 GB

6 hours ago, scook said:

The cwp file is 2GB? That would be extremely large. There used to be problems with audiosnap blowing out the size of project files but I doubt they ever approached 2GB. Are you using a lot of Region FX, long clips in Region FX or audiosnap? Is the virus scanner turned on where the projects are saved?

 

I record 96khz 24 bit .antivirus is on. But as I said before I never had this issue.

Update:

I found out, it doesn't always acting like this. In my current project, some times it takes 15 to 20 sec to save and some times 2 to 5 sec. 

I don't understand it.

No the one I used to working without slow saving was more than 2 GB.  I puled up the old project and same problem for the one I used to working without ant issue.

project is 1.91 GB

Thanks Scook.

What do you mean by using windows explorer? you mean just check the size of the projects?

It might be but I had heavier projects with more same plugins and never has this issue. I uninstalled and reinstalled the Cakewalk,  but still same.

My sound card is Orion Studio HD

3 hours ago, lmu2002 said:

Some discussion here:

 

I am running windows 8.1

3 hours ago, Gswitz said:

The duration of saves for Cakewalk are mostly driven by the amount of midi in the project.

No midi track. they are all waves. Also I am running windows 8.1.

I am recently experiencing this issue, when I open a new project and save it with a name, everything is fine but as the project gets heavier , saving will take more time to do its job. When I say heavier I don't mean lots of tracks and plugins, even like 20-30 track take too much time to save.  I never has this experience before even with 3 times more tracks and lots of VSTs and plugins.

Anyone experience this issue?

Thanks in advance for help

Hi guys,

Does anybody know how to calibrate the 9 faders on the vs 700 console ? They wont jump and stay exactly on zero point when I open a new track. 

Thanks

On 1/10/2020 at 11:46 PM, Scott Reams said:

I have an RME Fireface UFX and I use my onboard soundcard for all non-pro-audio Windows sounds. I route the analog outputs of that card into my Fireface and monitor it through that, so everything still comes out of the same speakers.

Thank you so much Scott for your information. I am just wondering if you had the same problem with windows sound that you route it to your fireface? did you get pops and crackles with higher sample rate than 48khz?If not, can you please tell me what was the point that you route the analoge output to your ?

Thanks again

On 1/7/2020 at 1:17 AM, Promidi said:

I am also inclined to suggest using the onboard sound enabled and have it set and set as the default audio device for Windows.

Yes. it is a good solution. I contacted to Antelope again and waiting for their response.

Thanks

Thanks. The reason I put the windows setting on 96khz is because if I play something in youtube or play a music in media player while my cakewalk is open on a 96khz project, my Audio device which is Antelope Orion Studio HD hangs and I have to power cycle the audio device which is so annoying. that's why I set the windows audio on 96khz. 

As I wrote an update above, after I installed a very first version of windows 10 build 1703 there were no pops and crackles. I downloaded some windows update accidentally that one of them was related to usb 3 driver  and even with  build 1703 I got pops . I uninstalled them and problem solved. It means it should be a glitch in windows 10.