Jump to content

Michael Warren

Members
  • Posts

    76
  • Joined

  • Last visited

Everything posted by Michael Warren

  1. Did early access to the above version. I can select expression lanes from view menu in PRV, but nothing there for me to enter or be prompted for an expression map. The only reason I upgraded was because the previous version I was using decided also to not display expression maps. I don't mean to complain, but there seem to be more and more bugs that are stopping me from getting anything done. Every day, something new (and unwanted) happens with the program. I've been a user of Cakewalk since they began ( I think as 12 tone). Upgraded to Sonar then paid for Sonar Platinum, then to Bandlab. Not new to program, but I think I've finally reached a frustration level of +10 db. I hate to say it, but I might try to crossgrade to Cubase since I did pay for the original Sonar Platinum. Anyway, after my whining, does anyone else not see the expression lanes that used to be there? Am I missing a setting. This is a great forum, very informative, and helpful, so I appreciate all the help I've received over the years. Thanks, Michael Warren
  2. PROBLEM SOLVED. Under Preferences, Hide related VST2 Plug-ins, and Replace if Possible on Project Load were unchecked. I was using Kirk Hunter Orchestral Program. After checking those 2 boxes, everything played fine. It's possible it did not like one or the other VSTs. I'm not going to go into depth searching for the reason. I'd rather get back to making music after a frustrating 3 days. Thank you all for your suggestions. Michael Warren
  3. I have unchecked zero controller. I inserted a Vol control of 100 at the start of the track, but still the same problem. I'm pretty much at a loss. Again, it's been working fine for over a month.
  4. Just noticed, same thing happening on 2nd violins. Very strange.
  5. I know. I've turned off zero controllers on stop. I've been writing this piece for about 3 weeks. It begins with Oboe solo and strings. Has always worked, but today, no Oboe Volume. I've checked automation lanes, that's fine. This is the only patch (oboe), that it's happening on. It was always working fine with volume up until today. I can manually move the slider up, but on release, it's back to no volume. I'm really not sure what's happening. Any ideas would be appreciated. I've even tried insert Volume 100 at beginning of piece for insert menu, but no success.\ Thanks, Michael Warren
  6. That worked great, but do you have to always go back to preferences when you want to open more than one plugin?
  7. I wasn't familiar with that setting. I might try that even though, closing them all as suggested by Nigel in his response, solved my original problem. Thank you for the tip on Recycle, I will also try that when I'm working.
  8. That solved problem. Closed All, then saved project, reopened, and non were there. Could just click on one I needed. Thanks.
  9. When I open a project with multiple VST plugins, even though I saved with them minimized, I have to minimize all the plugins again when I open the project. I can't seem to find a key stroke that will minimize 10 to 20 vst instruments at once. Any help would be appreciated it as I find it annoying to continual minimize or close all vst plugins used in project. Thanks in advance, Michael Warren
  10. Thanks. I never thought to check out those menus before a copy and paste. You’ve made my life a lot easier. Michael Warren
  11. Quite often I will copy a track or duplicate to use with another instrument. I'll usually use Paste Special. I'd like to see a checkbox similar to events that would allow me not to copy the articulation track. That would save me quite a bit of time. For example, a flute track copied to a Bass Clarinet and transposed down. I wouldn't have to delete all of the articulations I entered in the flute track.
  12. Quite often I will copy a track or duplicate to use with another instrument. I'll usually use Paste Special. I'd like to see a checkbox similar to events that would allow me not to copy the articulation track. That would save me quite a bit of time. For example, a flute track copied to a Bass Clarinet and transposed down. I wouldn't have to delete all of the articulations I entered in the flute track.
  13. After reading msmcleod very informative post. I then created 2 separate articulation groups for Soundiron Olympus Micro Choir. That gave me the 2 articulation tracks I needed to have women on one and men on another. I've attached the 2 groups for anyone who has that plugin. I'll start work on their Divisi patches next. Thanks again to this discussion group. A great source of knowledge by the participants. Olympus Choir Full Female.artmap Olympus Choir Full Male.artmap
  14. Thanks Nigel. I’ve got it working. Opened up a wealth of maps for me. Saved me lots of hours duplicating the wheel.
  15. Thanks. Perfectly clear explanation. I’ve been using note for the keyswitches. With sound iron vocal parts I’ll use cc for the Modwheel linked to blend. 0 for men, 127 for women, and 65 for both. Does that sound correct? 3 different cc labeled men, women, both.
  16. I think you may have solved my problem with 2 lanes. Using SoundIron Vocal plug ins. L1 are Male and L2 are feamale. With your explanation I should create 2 separate articulation groups so I can put male on 1 track and female on the 2nd. Am I understanding you correctly? That would allow me to have women using one articulation and the men another simultaneously. Thanks in advance, Michael Warren
  17. I just started making the articulation maps. Could you elaborate on what chase mode 1 and 2 actually do? Thanks, And thanks to Jimlynch 22 for posting his artmap.
  18. Import does not show the file name. I rename to .artmap and can see. I import but no data. Have you been successful importing a 3rd party DAW expression map? For example?
  19. Latest version of CWB has articulatiom maps. Easy to use.
  20. Some Daws save articulation maps with extension expressionmap. CWB saves as artmap. I tried renaming them and can see name in CWB articulation editor, but no data appears. Is their a work around to use other DAWs expression maps, or convert them to be read in CWB? Considering they all only contain midi data, is it their fields that mess up using them in CWB? Thanks, Michael Warren
  21. Once you use the articulations in PRV, could they be renamed to a user friendly name like pizz, or legato?
  22. If you were registered on the original cakewak site, log into that, go to my products ( I think that’s the lnk) and it will show you all versions and plugins you received. It will allow you to download them. Hopefully you’ll see your program to download. Michael Warren
  23. Trying to load into cwb, screen freezes up and I have to close cw through task manager. I can load into sonar professional, but it takes forever. Then I can save project and open in cwb with no problem. I can save as a track template in Sonar and insert into cwb. Hate to do these work arounds. I have multiple other large instrumental plugins and have no problems inserting into kontakt. My setup is an i7 at 3.1 mghz. 20 gb of memory, 1tb ssd and 1 tb hd at 7200 rpm. The program really hits my hd when trying to load. I copied to my ssd and not as extrme usage as my hd. Could it be a setting in my full version of kontakt 6.x? No other library has this problem. The program sounds great, but even with the great discount, it doesn’t seem to be a great fit for Cakewalk by Bandlab. Anyone else experience this? Thanks, Michael Warren
  24. Trying to load into cwb, screen freezes up and I have to close cw through task manager. I can load into sonar x3, but it takes forever. Then I can save project and open in cwb with no problem. I also own Sonar Producer and will try that next. Maybe save as a track template and try to insert into cwb. Hate to do these work arounds. I have multiple Other large instrumental plugins and have no problems inserting into kontakt. My setup is an i7 at 3.1 mghz. 20 gb of memory, 1tb ssd and 1 tb hd at 7200 rpm. The program really hits my hd when trying to load. I copied to my ssd and not as extrme usage as my hd. Could it be a setting in my full version of kontakt 6.x?
  25. Might pick up scaler2, not as an arpeggiator, but not being a piano player, it could save me some time upfront. Seems to give you a lot for the money. Thanks to all who gave suggestions. Will close thread now.
×
×
  • Create New...