Jump to content

G Randy Brown

Members
  • Posts

    85
  • Joined

  • Last visited

Posts posted by G Randy Brown

  1. On 11/18/2020 at 8:19 AM, Nigel Mackay said:

    You do know that Notification means a badge on the notification bell at the top right corner?

    By notification I meant an email stating someone replied to a post I have participated...ordinarily I do get one (I got one a few minutes ago to another thread I participated in) but nothing from this thread for some reason ("Notify me of replies" is checked below )

  2. When drawing controllers in PRV (ie modulation) I go from the smart tool to the draw tool and have to select draw line.

    My question is, is there a way to set the smart tool to draw line instead of having to change tools as the default?

    Thanks,

    Randy

  3. I don't recall if this is the correct term for what my issue is but it along with "polyphonic velocity audition " are checked.

    When I'm placing or dragging a note in PRV I sometimes get sound and other times not.

    Is velocity audition what I need (or is it another adjustment) and if so I wonder why it sometimes doesn't work at all.

    Thanks,

    Randy

  4. I haven't been active for a while but I'm trying to get a piece together for a memorial video for a family member and I hit something that made me lose my layout.

    I need the transport bar and tools bar to show consitently...as it is now I have the control bar showing and I have to click on transport or tools repetively and it's really messing with the flow.

    Thanks in advance,

    Randy

  5. 5 minutes ago, scook said:

    You can, try setting Windows and CbB to the same sample rate.

    If they are already set to 48 then some other apps are setting it 44.

    Hunt done the apps and change them (it may be your browser).

     

    As usual you are right Steve, I started a new  cwp and CW had no problem sticking with 24/48.

    I guess my next task will be to find out what kept switching it back to 44.1...but it's good to know it's not due to CW.

    Thanks again,

    Randy

  6. 19 minutes ago, John Vere said:

    I think it's more to do with the drivers for your audio interface than Cakewalk. Example I have no issues when using my much older Scarlet interface. I can leave Cakewalk open and go watch a movie.  It supports all diver modes etc. But my brand new Motu M4 behaves terribly with sharing. And it only supports ASIO and WASAPI. 

    I have to shut down Cakewalk now before opening Movie Maker or watching some videos. I imagine this is due to sample rates. In other words, Cakewalk is running at 44.1 and you can't do anything else that is running at 48. But I have no Idea why this is not a problem for my Focusrite. You do hear a little click when it switches. 

    Hmm I could have sworn that I used to always run 24/48 even in CW  (to be consistant with all of my video work) but it appears you are right and your suggestions have resolved my issue.

    I hit the ASIO Panel button under drivers and my Presonus Studio 2/4 was set to 44.1.

    I changed it to 48 and within a couple of seconds it switched back.

    I set CW to 44.1 and all is well so thanks very much!

    • Like 1
  7. It's been a while since I've used CbB but I've recently noticed CbB won't release the drivers after I close the project.

    I have to reset the audio or restart the PC to get back to normal.

    As I recall CbB didn't want to share drivers when in use but would always release them when closed.

    I've gone thru prefs and dont see an issue...any suggestions as to what I should do?

    • Confused 1
  8. 1- CW states it can't find my Alchemy folder so I show it where it is, it states it's a valid folder and all is well...I save the cwp and go thru the same process when reopening. 

    2- I get "Can't find graphics for T RackS 5" and click ok 25 times (I counted) and then it asks me if I want to enable the plugin or disable and I choose disable. I go thru this several times and finally quit getting the pop-ups but they return whenever I open CW.

    Any suggestions?

    Thanks,

    Randy

  9. I've been playing around with it and everythings loads fine except the 18 violins.

    It's not resolved yet but EW support has been comunicating since I opened the ticket yesterday so maybe you should try them too?

  10. Howdy, it's been quite a while since I've posted or even worked in CW.

    I built a new PC because my old one was struggling with 4K in Vegas (video editing software).

    I would like to get everything CW going on it also and trying to install all VSTs but CbB says they're not installed properly.

    I installed my old Platinum version to get back things like CA-2A and it states I'm in demo mode but I can't seem to be able to activate it...the toast has a link to activate offline but this PC has internet access.

    How can I enter serial number/activate it online?

    Thanks very much,

    Randy 

     

  11. Yes but more specifically I want to be able to do what that guy is doing... drag across select clips in the timeline and them automatically open in PRV while removing whatever is already in the PRV.

    What I do now is have all MIDI tracks in PRV and selecting/highlighting whatever track(s) I'm working with...if you know of a better way I'd like to hear any suggestion...thanks!

  12. On 7/18/2020 at 3:56 AM, Raul Ragudo said:

    RANDY !!!??

    did you get your focusrite/ Scarlett to be recognized? Douse it come up!?
     

    I have the same issue tonight!!! 
    is this a common issue!?


    i go to the ......edit> pre> blah>blah> blah and when I end up on devices, it’s not there for me to check.  I’m alerted me when something was disconnected it didn’t tell me that I disconnected my 2i2 but it did inform me .....🤯🤯🤯

    what do I do!?!? 

    Sorry Raul, I just now ran across this...no, I never got it resolved, I switched interfaces back to the Presonus.

  13. On 8/27/2020 at 4:15 PM, Max Arwood said:

    Under the Pencil tool - Hold your mouse on the little triangle at the bottom right side if you hold it down the menu will appear with 8 drawing styles. The default is free form, but can be changed at any time.  I don‘t think there is a option for the default if that is what you mean.

    Sorry, I just stumbled on this (I didnt get an email stating someone had replied for some reason).

    Yes, I know how to change it and what you describe is what I've been doing... I was just hoping there's ma way to change the default.

    Thanks,

    Randy

×
×
  • Create New...