Jump to content

pax-eterna

Members
  • Posts

    84
  • Joined

  • Last visited

Everything posted by pax-eterna

  1. Set up a MIDI track, setup an instrument, keyboard is recognised and the LED bars are flashing to show input, track set to record press the R key (or even record button in main transport control) everything starts BUT no MIDI data is recorded to the track? Is there some new method in recording MIDI? Or is there some hidden switch or setting somewhere that I have changed (inadvertently) ? Thanks
  2. Sooo, totally my fault - everything in Sonar was correct. I had the outs going in to two mono channels on the desk - I set it this way ages ago for something else and totally forgot. And of course BOTH were panned to the centre so of COURSE it was always coming out in the centre - duh!!! Sorry guys for wasting your time, but I thank you for taking the time to respond! Much appreciated.
  3. hmm, okay bitflipper interleave is at stereo no effects on either master or individual tracks. I mean I should be able to send a mono track to either left or right, not sure why I'd then need a stereo panner?? Anyway I'll play around some more. Craig same thing...put the cans on and signal is dead set centre even though the track is panned either 100% left or right...audio out the audio i/f is definitely connected L-L and R-R to the speakers, and the phones jack is stereo and both sides are working....but I'll keep experimenting. I must admit to wondering why the live tracks (at gigs) always sounded so muddled in the middle when I pan all tracks in a mix to keep centre clear for live vocals. The green led bars even show the track is panned correctly, but it still comes out via cans and speakers as centre : Oh and the waveform preview pane also shows it panned to one side!
  4. thanks guys - answer to both is no (Craig) ; and already done that (RStJ) - as in my OP - although I wrote it as default stereo
  5. Just started noticing this really....trying to pan tracks but the master is still coming out as all mixed to centre? And when I export the tracks, it is the same all tracks are not being panned as set in individual track panning. Is there some new trick to get this to work as expected in the new Bandlab Sonar? Do I need to create two buses one set to left then one to right and forget master? Thanks Oh and the tracks are all at the default stereo. IE they are not forced to mono (even though the audio clips are) I tried changing this to MONO but it made no difference.
  6. and now it has lost the AD Drums validation! What is it with this app? an update and everything changes! Damn annoying really.
  7. Thanks guys, tried a few things from above it still crashes sonar the minute I try to load a module. The "old" pro channel view that was pre-loaded with the EQ, among others is totally gone. Maybe I'll have to re-install "old" Sonar again, as mentioned above. The responses were much appreciated, and I'll continue to try and hunt this down.
  8. Firstly Pro channel (after the last update) now shows none of the standard Pro channel stuff, like the EQ etc, and whenever I try to load a module it crashes Sonar. Anyone else experiencing this? Thanks
  9. Cool, thanks all at Cakewalk for the hotfix - opening projects issue has gone (related to one project only button) - with the Allow Only One Open Project checked!
  10. I think I found the issue. So far so good - narrowed it down to the Allow Only One Open Project tab. Turned it off and projects now load. I will advise if it happens again.
  11. I assume it was you - apologies if it wasn't. But you were the only admin who responded to the thread...
  12. Thx Noel - I have replied. @Promidi thx for posting that but it made no difference. FWIW when I checked the MIDI devices, none were selected even though I know before the update they were. So I tried re-enabling it and that made no difference either. going on most of the replies it seems it is a local issue so it could be a bitch to try and sort out
  13. Here's another one for you - Just tried opening the default Basic Project - same thing...Tried loading new Empty Project same thing - these are the Sonar default templates I am trying to load. I have three projects that need to be completed by Friday this week...
  14. No further info I can give as that is all there is - I open Sonar, it opens...I try to load a project, it freezes...nothing else is happening
  15. Nope still freezes...tried selective loading of plugins, loading all, loading none...nothing makes a difference. The first time on probably 10-12 years I have run a Cakewalk update and this has happened! Basically I am screwed! As with this new system I cannot roll back or do anything - totally f@#cked 👿
  16. Thanks scook - I tried various projects from different times as well that I KNOW have different or in some cases, nothing but audio. Yeah I just call it Sonar out of habit! I'll try the safe method you suggested..
  17. Just restarted Windows and Sonar 3 times...each time same result! I can start new projects, even import audio from existing projects but it just keeps freezing when I try to load an existing project - standard CWP stuff....was working on them juts three or four hours ago. There is something in this update that just broke something....I havhe no idea what!
  18. I just did and now NO existing projects will open. Program itself seems to start ok, but it totally freezes when I try to load any existing project!
  19. I'd hold off - it just killed my Sonar instal...No projects will open now..it just hangs at the project load. App opens okay but won't go any further!
  20. Bingo!! That was it. Thanks heaps for that. I'd have spent hours and probably still not found that!
  21. Just had this weird problem happen. I load up a VST get all the connections set, MIDI ok, and playing, press the space bar to start playback VST plays fine, press the space bar again to stop/pause playback and then when I press spacebar again to restart playback the MIDI connection to the VST is lost? I re-load the VST preset I am using (by loading a different preset then going back to the original) and it plays fine again. Repeat the space bar thing and it loses it again. EDIT: actually not sure if it is MIDI - the green bars indicating MIDI input (when it is working) flash nearly to the top but when the issue happens I can still see tiny amounts of MIDI activity if I press keys (controller)strongly - there is still no sound though Anyone have any ideas on this please?
  22. yes that was interesting...and again thx for the links abacab! Lots to take in hahaha!
×
×
  • Create New...