yamadatarou

Thanks. I already cleared up the data.
My space is around 16ＧＢ→26GB though.
Not so smooth.

I try to delete some tracks from the Cakewalk project.
So It becomes smooth.
Though, I want to use the tracks.
I can't delete it.

But the problem it depends on the number or kind of fx tracks.
And It couldn't bounce.

How to do is the best?

It was moved.

but it isn't heavy and doesn't  work day by day.

I delete this cash.
C:\Cakewalk Projects\Picture Cache
C:\Users\aab\AppData\Local\Temp
C:\Windows\Temp

And I could export mp3.
But I can't now.
Audio data become 2kb and not work.

Are there other cash and how to repair it?

I try to off the some track's fx.
So preview moved smooth.
Though It can't export and I can't bounce.
It is a problem.

Thank you so much.
Maybe that effected of FX.
I try to change the FX.
So I could repaired.

Pan the audio of one track left and right,
It affected all the tracks.
Even the BGM is swayed left and right.
And the left and right truck sound is small.
What should I do now?

and other question
--------------------------------------
Select all data and bounce to track
All mixed (bounced).wav
This data will be created, but can this data be used as the final audio file?

Or do I have to export it from the point where it bounced?

I could connect the audio interface and change ASIO.
It works smoothly.
Thank you so much.

I'm trying now.
Sorry, I couldn't add the information you need.

I use an audio interface.

When an open cakewalk appears missing audio device message at ASIO mode

wasapi_share was played setting audio correctly.
but the sound is noisy and stops.

WD/KS was a little smooth. but it stopped heavy place.
The audio device appears a little bit different but it's okay.

 The setting appears in the audio interface.

Maybe it doesn't good connection between the audio interface and Cakewalk.
 

Thank you so much.

I add informatio

WASAPI shared.
bit16
sumpling late44100

Maybe spec is enough
I am using wasapi share.

Maybe I have an audio interface but it doesn't good connection to USB.

It is not using is better.

And is it better to connect when I use Cakewalk?
Does it become smooth?

I use it only when recording voice.

Thank you so much.
I try to change
track -6db
sub-buss -3db
master -12db
my understanding is ok?

I will reduce the volume -6db for each truck.
However, Is there any way not to delete the automation?

Repair is hard.
>
(i use a calibrated 75db level on main monitor buss and also 63db on -12db monitoring buss) 
I couldn’t under stand so much is it needed?
And how do you check 75db?

>then easily adjusted to accommodate the target export levels later.
How to do that?

Can I use Ozone Maximizer of that way?
Is it needed?

Thank you so much.

I try to change the volume that uses automation of each track.
It is over 0db place of each.

But the master truck doesn't over 0db.
Does it need to adjust to lower the peak place of each track?
Each track is over 0db (become red).

Even if the master track is not red, will the sound quality deteriorate if each track is red?

 

（I couldn't find the button for offset mode and envelope mode.
And I couldn't understand the difference between offset mode and envelope mode.
Which mode is better to adjust each track?

But it's okay.）
 

Music preview doesn't work well.
It likes delay and bad sound.
I changed the performance mode of the PC battery.
It works better a little but still, it doesn't work well yet.

I tried 2 way of this URL but I couldn't.
https://help.cakewalk.com/hc/en-us/articles/360021858253-I-m-experiencing-latency-or-audio-dropouts-while-recording-?auth_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJhY2NvdW50X2lkIjo3MDk1NzEsInVzZXJfaWQiOm51bGwsInRpY2tldF9pZCI6MTYxNjE5NywiZGVmbGVjdGlvbl9pZCI6MjcxMTYyOTEyNDU3MjEsImFydGljbGVzIjpbMzYwMDM0NDQwMTk0LDM2MDAyMTg1ODI1MywzNjAwMzUwMzc2OTRdLCJ0b2tlbiI6bnVsbCwiZXhwIjoxNzA2NzgyMzQxfQ.xd0HOX_QYa1eYyg_OSYeQxFvbHvcNsM6M0JAcL8V0wE&solved=0


>I’m experiencing latency or audio dropouts while recording!
2.If you are using a Windows driver mode (WDM/KS or MME, or WASAPI Shared in Windows 10), try moving the Buffer Size slider to the right towards "Safe"
I couldn't move slider.

>Hard Disk Buffer Size Settings Need to be increased:
1.In Cakewalk by BandLab, go to  Edit > Preferences > Audio - Sync and Cachin

Audio only 3 menu.
So I couldn't choose  Sync and Caching

14 minutes ago, 57Gregy said:

Route the tracks that have volume automation to a sub-bus and route that sub-bus to the master bus.

Then you can adjust the overall volume of the automated tracks together using the volume slider of the sub-bus.

 

I had thought of a way to do it, but
Since I'm a beginner, I didn't know if there would be any changes in the sound quality, so I didn't try it.
This advice comes from someone who has experience using it, so it seems okay.
I'll try.

On 2023/11/26 at 午後11時10分, mark skinner said:

 

私はクリップへのバウンスが問題であるとは考えたことがなく、私にとっては編集プロセスの一部にすぎません。何を修正しようとしているのか理解できません。「クリップ」にバウンスしますか、それとも「トラック」にバウンスしますか?

I tried to bounce track.
I could separate of clip.
I think It's better to not need to bounce.
Because I can back before and reduce bounce file.

I solved the problem thank you.

On 11/26/2023 at 10:47 PM, Glenn Stanton said:

MP3 is a lossy format so each bounce the audio is degrading. badly. WAV. this is the way.

use the CW export function to bounce the tracks. after you bounce your tracks (like in the days of yore with 4-tracks and the need for 20...) you can clear your clips in the project and go into your Audio folder to remove them. then import the exported file(s) into your project (or new one call "myproject-v0###" etc.

or better as gustabo said - upgrade with a large SSD disk

Thank you.
Teach the way to clean the project.
I under stood.
 

On 11/27/2023 at 6:29 AM, John Vere said:

I just bought a 128 GB USB flash drive for $12.  Storage is dirt cheap. 1 TB drives are well under $100 now and you can use the Samsung Magician to migrate to the new drive.  Simple 

 

 

Thank you.
Get drive is one of the way.

On 12/27/2023 at 12:45 AM, mettelus said:

Also... two temp directories on your computer that always collect things  while the machine is running, but never purge themselves on their own are:

     C:\Windows\Temp
     C:\Users\[username]\AppData\Local\Temp

Everything in those two directories can be safely deleted (and ones that will not are being used by open programs... just "skip" those).

Also, "AppData" is a hidden directory, so to view it, you need to change search options in Windows Explorer (View->Options->Change folder and search options... then at the top of that popup... View->then check "Show hidden files, folders, and drives").

If you have never cleaned those two folders, you may have GBs worth of temporary files in them.

Thank you.
I unchecked that.
And, many temp files were made.
I deleted.

Finally, there is work to reduce the sound pressure of the master track to 0db or less,
If you set automation for individual tracks, you will not be able to adjust the volume knobs.
I want to lower the volume evenly, but what should I do?

And, if it has other ways to reduce the volume of trucks.

Please tell me.

Save to a new folder and reduce the number of files
Thank you for helping me reduce it.
However, is it not possible to link loaded files like in sound one?
If I load MP3 or WAV, it will bounce.

I don't have much space, but I'm trying to free up some space, and I want to organize and delete the multiple bounce files I don't need, but are they all linked?

On 11/22/2023 at 2:21 AM, mark skinner said:

Once you split , move a clip , or put fade ins or outs on it etc .. the changes will get "baked in"  after you do "another" bounce to clips . The original won't come back unless you undo your last bounce.

My tracks (especially guitar) end up getting split in so many places , I pretty much bounce to clips All the time. It looks like a mess if I dont.    There was actually another thread like yours , with the Same problem about a week ago. Most of the time , if you just Google the problem ,  you will get directed straight to this forum to a thread with the answers.  ms

I see, everyone has the problem of getting a lot of bounces.
And I can't find a way to fix it.
Is there a way to undo the bounce?
I'm not good at English, so I'm sorry if my understanding is wrong

I'm not doing bounce.

But bounce mp3 and wav file makes at the Audio folder automatically.

Maybe increase saving or importing new files.
I want to only one link file.
How to  do that

And I want to know when the bounce file is making.(Import new data or saving??)

35 minutes ago, mark skinner said:

Select your entire clip , bounce to clips. You can then split it anywhere you want with your FX still on it. 

I was able to split it that way.
thank you.

However, once it bounces, will it not come back? It's okay though because I still have FX. Is there anything wrong with bouncing?

5 hours ago, David Baay said:

Clips with ARA FX applied can't be split. You must first render the FX by bouncing to clip or make you splits before applying the FX. I believe this is an ARA limitation, but have not tried it in another DAW.

Thank you.
I under stand.
Maybe FX delete at once.

and copy paset FX aain.

7 hours ago, Promidi said:

Select Smart tool. 

Select clip. 

Hold ALT while hovering over selected clip - pointer becomes pair of scissors. 

With ALT still pressed, left click.  The clip will split where the pair of scissors mouse pointer is

This has always worked for me.

Thank you. I couldn't do that. FX can't split.

I want to split the clip.

But right quick.

It couldn't choose split clip.

It is gray, I can't choose.

And,I tried to choose the split tool at the toolbar at the top.

And Alt-left click.

It couldn't split.

Only one clip that doesn't use FX can split.

But, other clip that uses FX can't split.

Maybe it uses the FX tool.

How to split FX qlip?