Jump to content

Al Robbins

  • Content Count

  • Joined

  • Last visited

Community Reputation

4 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Much appreciated to both of you! It’s been so long since I recorded anyone with effects they can hear that I did not remember to assign the output!! I always record myself dry - I just don’t use this for myself. But, other people, it might help them. It’s a handy function for those people that want to hear effects while they record! Thanks, Al
  2. Let’s say I have a vocalist that wants to record a track and hear effects while recording. I have forgotten how to do that. I think the following is how to do it: On the track: 1) Click the Echo Input to “On.” 2) Add the plugin(s) to the effects bin 3) Choose the correct input on your interface 4) Choose an output (such as ‘Vocal Bus’ or even ‘Master.” Then hit record and the vocalist will hear the effects but they will not really be on the track (non-destructive). I really was not sure about number 4 just because if you have an input and output assigned it creates latency. I assume clicking the Echo Input button stops that latency. Did I get it right? Thanks, Al
  3. Here is another stupid question from me - by “apply Region FX before export” do you mean render Region FX? Which I have done that on the Melodyne pitch corrected vocals.
  4. I have been using Cakewalk for 4 years now (started with Sonar Platinum). My mixing skills (or lack thereof) are amateur at best. I would like to send the Cakewalk audio to a professional studio to see how their mixing and mastering turns out. How do I do that? Everything is in audio, no MIDI, all recorded with a click to make use of the grid and snap. Also, I used Melodyne ARA region effect for pitch correction on the vocals. When sending the audio to the pro- studio, do I just copy the files from the Audio folder in the project folder to a flash drive? And do I copy the Melodyne folder as well? Is it really that easy? My assumption is the studio will not have Cakewalk but some other software. Will the Melodyne pitch corrected vocals audio work for the studio if they do not use Cakewalk?
  5. Thanks everyone for the tips and advice. The parts I used clip automation gain were subtle so it doesn’t sound weird - like loud and then soft, just a few small cuts - seem to be on consonants that the vocalist made louder. This is the first time I used clip automation gain. In the past, as bitflipper said, I have used the free plugins from Blue Cat - free g for gain staging and their gain plugin, did some serial compression (subtle moves) and got the vocal track sounding pretty decent. Hopefully this clip automation gain helps. And if not, heck, I can delete the clip automation. For me, it’s always good to hear from the forums. You all have a wealth of knowledge that has helped me a great deal! Al
  6. Thanks to Mike at Creative Sauce and his videos - I used Clip Automation-Gain on a vocal track. There were a few parts that were a little louder. I just reduced the gain by 2db - 3db on the louder parts so that it sounded pretty close to the same. Really cool now that you can see it change the wave file. I began my gain staging. My question is - does the Clip Automation-Gain have any relationship to Gain Staging? I started my gain staging process with the gain knob in the Console view. Seems to my ear, that the 2db - 3db cuts I made translate through when changing the gain on the gain knob in the Console View. To clarify: In the track view - using the Clip Automation-Gain, it shows a 0db line - that line does not change when I turn the Gain knob in the Console view (when I am gain staging). No matter what I set the Gain knob to, I can still hear the cuts I made on the Clip Automation-Gain line so I am guessing there is not a relationship between the two. Does my question make sense? thanks, Al
  7. Much appreciated for the help Nigel and David. See, I have to look up what a m.2 NVME type is and what MOBO means. But my computer knowledge is not so bad as you have to ask “is your computer turned on?” Ha! Ha! I plan to get Kontact this afternoon and then will likely a flood of stupid questions on NI’s forum and here....but I will read the manual too, ha! Thanks again for the help. Al
  8. Thanks everyone for all the help and advice. Got another question - everything I have researched so far indicates to download Kontact 6 to my DAW’s C drive, but to download any sample libraries to a different hard drive since they can be ridiculously large - the reason I found was so it does not slow down your computer’s performance. So, I could use an external SSD for the sample libraries and just plug in that external SSD to a USB port on my computer right? I assume you tell Kontact where to look for the sample libraries - is that correct? Also I have an Alesis V49 MIDI controller that I set up in Cakewalk preferences to recognize - works fine with all of my virtual instruments already. Do you have to use a Native Instruments MIDI controller with Kontact 6? Or will the Alesis V49 work fine with Kontact 6? I still consider myself a beginner with all the digital audio engineering - just know enough to be dangerous! Thanks, Al
  9. Every VST scan I get the pop up window that reads, “Select Waves 9.7 SG Studio Modules folder.” I have always just clicked Cancel and the scan proceeds. All of my Waves plugins work fine and all of the other party plugins I have work just fine. Am I supposed to pick the Waves folder? If so, it seems like this is the path C/Program Files (x86)/Waves. The folder icon looks different than the other folders - it has a Waves logo on it. If I select that folder will it mess anything up? I just updated all my Waves plugins from 2018 and everything in the above mentioned folder shows as V10 or V11. The popup window has 9.7 to select. Does that matter? Thanks, Al
  10. That makes sense to me - you could keep tweaking and changing forever! Sometimes, it’s fine to commit and move on. At first I thought you might not be able to convert (record) MIDI to audio with Kontact.
  11. I have been considering purchasing Kontact. I recently watched a YouTube video of Mike from Creative Sauce explaining multiple methods of how to set up Kontact in Cakewalk - very informative. I have used Cakewalk strings, Addictive Drums 2, the Cakewalk piano, Dimension, etc., all the virtual instruments that came with Sonar Platinum (cool of bandlab to let them all transfer when they took over). Kontact is a sampler - I understand that, different than the virtual instruments I have. I have always created the MIDI for my virtual instruments, tweaked it if needed, and then recorded it to audio, archive the midi track, delete the synth from the synth rack, then begin the mixing process. When using Kontact, do you not record to audio? Instead, mix the MIDI? Just curious how other people do the mixing because I have never mixed just with the MIDI. I always mix with the audio. Am I using the wave file on track view as a crutch? I have about 30 years experience in analog mixing and 3 years of digital mixing experience. Shameless plug - link to one of my soundcloud songs I mixed and attempted to master so you can hear my skills or more like lack thereof - I know, the mixing is terrible. But, wow, do I enjoy it. I have written a plethora of scores for orchestra music since I was in high school all the way to present day. It would killer to finally get them all recorded and Kontact seems like the best solution. So, I came to the experts - do you just mix using MIDI when using Kontact? You guys always provide excellent help! Thanks, Al
  12. That is confusing-but that’s what I get for commenting on something I have never done. It would be cool to have someone that knows Cakewalk in and out to join me while I record and mix. I still really do not know what the heck I am doing.
  13. I have never used normalize. I try to keep the dynamics. Wish I could help you with getting the level similar to a radio/commercial track. That seems like mastering to me and I don’t have experience with mastering other than EQ, compression and limiting.
  14. Good to know - I have hardly used the gain knobs either. I am recording our second session for our demo and thought I would try using them this time. Appreciate your input.
  • Create New...