Green Needle

John, all i did was install 2022.11 right overtop of the latest, works like a charm. No roll back driver or anything. Still authorized and getting work done....

Dude. I feel ya. Did you try reverting back to 2022.11? it works-no pop up. Honestly this is such a let down from this company.

revert to 2022.11

No one else seeing this?

I'm not sure when this started but with the latest Fabfilter updates when i go to the presets menu(the cakewalk one) in the FF plugs, i see Prog 1-128 in there as presets. Now a bunch of the ones i made are hidden down on the bottom and i cannot access them. Anyone else seeing this? See pic.

SOLVED- FP NEEDED TO BE IN MCU MODE.... I recently built a windows 11 machine, and i cannot get the Faderport V2(single fader version) to work with it. I have the lastest firmware 3.51 I see the faderport in the midi devices but the controller will not seem to work. I have tried all the Mackie modes and the Faderport mode(which is in brackets under the "controller/Surface" menu for some reason. Any ideas? In general i am having trouble getting all midi stuff to work with windows 11 and Cakewalk. Is there a fix or something?

this is probably related but not specifically what i am talking about.

Its pretty sporadic actually, sometimes the cross fades work fine but other times i grab a clip and slide it onto one adjacent to it and the CF curve just goes off the screen to some weird spot on the clip, like it starts or ends its fade in some random spot.

Its been going on forever, see video below. https://www.dropbox.com/s/wgxjl8ayddj1wb3/IMG_5474.MOV?dl=0 Why? it drives me nuts.

Thanks for the ideas. I had to abandon that os drive so i could go back to work. I put in a clone OS i had from a few months ago and it works fine. (pays to back up!!). I will check it later. It worked fine for ever then all of a sudden stopped. So weird.

Tried reinstalling cakewalk, still no fx chains will load.

Latest version....Still not working after restarts, rescan plugs etc. Reinstall Cakewalk?

Any idea?

Ahh my mistake i do see them on there, they just are not inside separators as i see them in the other menu! Cool.

Try instead of clicking on the tracks output option, highlight the track then go to the track menu above and select 'select track output' The patch points aren't in that one. The reason this is important is because in a large session with many busses(i use 90 or so) you have to scroll forever to get to the PP option if you use the track out menus, if you set a keyboard short cut to get to the outs from the track, which is the same as what you get from the tracks menus as above, you can quickly scroll down to the out you want. So for side chaining gates etc its all good but to use patch points its a big time waster as you cant use the short cut. Also if it would be great to be able to access the outs of the busses from a short cut in a similar way. The PP's don't show up on send assistants menu either, this would be really helpful to have fixed. And it's not a huge one cause you can make a shortcut for 'send assistant',,,,,, BUT when you go to the insert send option on a track, all the options for new tracks or busses and for the send assistant are at the BOTTOM, So again its a long scroll to get there with a lot of busses, would be nice if they showed up at the top of the menu instead. Thanks.

Can the patch points be included in the output options please?

I have mentioned it would be nice to have the Solo safe'd tracks stay solo safe'd when the global solo button is pushed, On another note a current problem is when a track is solo safe'd it is being affected by the dim button which i don't think it should. In my case i have all the mix from the console coming back into the daw on one channel which is solo safe'd, when i hit the dim button the level of the solo saf'd track drops by the dim amount. This shouldn't happen.

I did finally find a work around for this. If you take the track to be made into midi and put it in an empty session(that is the same tempo) make the midi track by dragging the audio file to a midi track....(it works in an empty song) then export the midi track and re import to the original song, it works, you just have to line it up to the source track at the sample level.

Actually moving the track out of the timeline of the song then back doesn't work. When the midi that was created is moved back to the song position it glitches and halfway though the midi notes goe out of sync. Life is too short for this.

Thanks so much for all the discussion. My goal is simply to make a quick midi track of the kick so i can run Superior drummer on it and get a sample going. Nudging the track 500 seconds to the right to get it out of the song frame, then creating a region using the perc algo on the kik clip, then shift dragging onto a midi track did the trick! Thank you all for your suggestions on this!

This video is a good example of what happens. Not always but when it starts i need to restart and sometimes that doesn't solve it, sometimes it does. Windows 10. IMG_4508.MOV

Hi, i am having problems with dragging an audio track to a midi track. When i drag the audio track to the midi track, in this case a kik drum, the program spends like 10 minutes making midi tracks of everything else in the project as well and stacks them all in the midi track! I have tried un linking the track, taking it out of the folder, making sure its the only thing selected, changed the default algo in melodyne to perc, made the track have a region before dragging it etc etc nothing helps.... What am i doing wrong?

They take lanes actually work as they should its just the graphics that are goofy. Sometimes a restart will fix it others times not. I will try to post a video of the problem soon.

No one? Am i the only one who gets this problem when editing stacked takes?

I've also noticed that it takes the same time to delete a large FX chain in a bin as it does a single plugin.