Mik Urrey

43 minutes ago, CJ Jacobson said:

• Do your tracks go to the master bus
• Sends go to buses
• Buses go to the master bus
• Is the master bus the only bus  to go to the main outs?

All answers are "Yes"

43 minutes ago, CJ Jacobson said:

Are you 100% positive that your export setting are set up correctly? How are you setting them up?

I'm not but I tried many different settings and all avaliable output formats, results are same (but if I disable 64-bit engine I get an invalid vaw file).

43 minutes ago, CJ Jacobson said:

There is a setting in the preference menu to fix DC off set upon audio files, so make sure that is selected

I found only "Remove DC offset during record", nothing for externally imported audio. It's switched on.

43 minutes ago, CJ Jacobson said:

You need a dedicated audio interface. The built in sound cards are not able to deal with the demands of producing audio and running a DAW proficiently. This built in card can give you artifacts, as its drivers are lacking and its converters for A/D and D/A are lacking and its internal hardware is lacking. 

I know you're right but I'm not a profi and not need extra quality for the time being, standard quality and features + ASIO drivers are enough for me. But I tried some other DAW's before and  had no problems with rendering.

May be these problems caused by CbB's "analog sound oriented" engine?

P.S. I recreate the project with same samples and FXs, it was rendered very well. But when I add one more sample, I got invalid output vawe.

When I rendered another project with VSTi's and no samples, I got fine quality every time. So I assume now that some of my manipulations with the samples cause these errors.

Hello!

I have bad rendering quality in CbB. 

Whichever file format or samplerate or bitrate I choose at the output I hear clicks and pops in the file what I don't hear while I play the track in DAW.

Also source samples has this pops and clicks (visible to the naked eye DC offsets) and I can't remove them as DC offsets, using fade tool only.

How to deal with it?

Windows 7 x64, built-in audio interface.

1.mp3

Unlike the LoopBe1, LoopMIDI allows to create more then one MIDI port. So I can use one internally in CbB and have another for connect external programms to CbB. And yes, seems it protected from loops

Thank you! It works properly now.

I saw your post about remote control via LoopBe1 on another board and tried to make that but LoopBe1  can not provide in and out for one app at the same time and throws warning. So I thought it's my mistake again and abandoned this way.

Now I have installed LoopMIDI and it provides needed ability.

29 minutes ago, scook said:

If no one provides a solution, I'll try to make some time later to take a look at this.

In the mean time, for auto-panning take a look at Sonitus Surround.

Thank you scook!

I know about Sonitus Surround but panning is just example. I'm looking for a free multipurpose LFO tool can automate any knob and change its own frequency by another automation lane.

Hello!
I try to automate the stereo balance of the track by LFO using MIDI Shape shifter.
I found this instruction

Quote

I did get MIDI Shape Shifter to work. Here is how. After installing taking all defaults.
Create A New Project
Insert MIDI Shape Shifter into the project using an instrument track
Insert DPro into the Project using an instrument track
Set the input on the MIDI Shape Shifter to my controller Omni
Set the input on the DPro track to MIDI Shape Shifter Omni
Load a Program into DPro
Set echo on both tracks
Play controller..............DPro should sound
Pick Transpose (+1 Octave) Preset from MIDI Shape Shifter
Play controller..............DPro plays 1 octave higher.

http://forum.cakewalk.com/FindPost/3198292

OK, Octave down/up works fine.

But nothing happens when I try to pick preset "LFO" fnd attach the Pan fader to MIDI CC 7 Ch 1. What am I doing wrong?

There's a photo of my adventures